A basic 3d-model of the NASA AD-1 Oblique Wing experimental aircraft with an asymmetrical swept wing This includes models with the wing swept, straight and movable as a 3 part assembly, each with and

Introducing the NASA moon lamp with a perfect 3.6cm diameter hole for a tealight, designed by Mihovec Design and available on Thangs.com. An epitome of innovation in the Arts & Entertainment category,

A basic 3d model of the X-43 A experimental aircraft used by NASA to test scramjet technologies the model is full scale but is designed to be scaled down at about 1/10 to 1/20 scale and 3d-printed t

fun and strong

Experience 3D printed organization at its finest printed organization at its finest with this "Print in place modular box" 3D model available for download on Thangs.com. This functional organizer is m

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4968924. I remixed from https://www.thingiverse.com/thing:3095242 to get a 35 degrees mount, and used the thruster mount

A 3D-printable model of the Space Launch System or SLS rocket being developed by nasa based on modernized modified Space Shuttle technology to eventually bring human into deep space, back to the moon

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3904605. A space shuttle model fully designed by me using Blender 2.8! It's my first creation with Blender so comment an

https://nasa3d.arc.nasa.gov/detail/skylab-c

https://nasa3d.arc.nasa.gov/detail/mars-model

https://nasa3d.arc.nasa.gov/detail/insight_cruise_lander

Mars Helicopter Prototype https://mars.nasa.gov/resources/22372/mars-helicopter-prototype/

Become a Member to receive ✔️ LOTS of FreeBees ✔️ Commercial Rights (Collector & VIP Plans) ✔️ Content Requests ✔️ 50% Off My Entire Cults3D Library Kaoz Studios Discord https://discord.com/

Author/Origin: Michael Carbajal. NASA Headquarters https://nasa3d.arc.nasa.gov/detail/freedom-c2

Author/Origin: NASA Jet Propulsion Laboratory - Solar System Simulator https://nasa3d.arc.nasa.gov/detail/jup3vss2

Bit holder for NASA BOX

https://nasa3d.arc.nasa.gov/detail/nmss-hdu

Become a Member to receive ✔️ LOTS of FreeBees ✔️ Commercial Rights (Collector & VIP Plans) ✔️ Content Requests ✔️ 50% Off My Entire Cults3D Library Kaoz Studios Discord https://discord.com/

Author/Origin: NASA LaRC Advanced Concepts Lab, AMA Studios https://nasa3d.arc.nasa.gov/detail/nmss-sev

nozzles holder for NASA BOX

A basic 3d model of the NASA/BMDO Clementine satellite designed to be 3d printed at around 1/10 scale, made by commission and allowed to publish this includes a full scale model, one prescaled to 1/1

Become a Member to receive ✔️ LOTS of FreeBees ✔️ Commercial Rights (Collector & VIP Plans) ✔️ Content Requests ✔️ 50% Off My Entire Cults3D Library Kaoz Studios Discord https://discord.com/

NASA, SPACEX, BLUE ORIGIN - KEYCHAIN Support our work with your donation! Thanks https://www.paypal.com/donate/?hosted_button_id=RXNWN4KHFH7EG Follow the youtube channel to help the channel and enco

Author/Origin: Christian A. Lopez. NASA/JPL-Caltech https://nasa3d.arc.nasa.gov/detail/terra

Author/Origin: Michael Carbajal. NASA Headquarters https://nasa3d.arc.nasa.gov/detail/friendship-c2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2977832. i remixed the nasa wrench to be be 2 sided and hollow at the handle. i had to change the handle shape to be ab

Author/Origin: Michael Carbajal. NASA Headquarters https://nasa3d.arc.nasa.gov/detail/faith-c2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3074550. i made a toothpaste squeezer using the nasa wrench as the ratcheting mechanism. rod has supports between the

This is 1 coaster in a set of 4 that I created for myself. (check my models for the other 3) Each coaster was designed to fit in a standard Gridfinity baseplate. As i do not have the ability to pri

Remix of https://www.thingiverse.com/thing:2238190 Added a lip at the bottom to prevent the card from falling out if tolerances were loose. Also beefed up the lanyard loop to prevent breakage.

Author/Origin: Kevin Lane. NASA/JPL-Caltech https://nasa3d.arc.nasa.gov/detail/aqua

Author/Origin: NASA Jet Propulsion Laboratory - Solar System Simulator https://nasa3d.arc.nasa.gov/detail/jup2vss2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3388160. I was always fascinated by space and jealous of those, who were outside of our world. So I wanted something to h

This is a negative of the old NASA logo. Again doing something a little different. I hope you enjoy

This is a 1x3 plate that has an older NASA logo on it that would look great on a desk along with your other tools

This is an elegant, minimalist rocket ship blasting off into outer space. It's perfect as a desk toy or display for a shelf. The model prints in two colors (the rocket and the plume of smoke). The plu

Introducing the mesmerizing Hybrid Saturn Lamp. With its versatile design, you have the option to either screw the legs out and hang it from the ceiling or use the convenient leg holder to keep them s

Relevant Video This super fun triangular mesh fabric is the result of a good bit of experimenting with different ways to print cloth-like materials. Whi

Are you looking for a unique decorative lamp to stylishly illuminate your home? Then our 3D-printed moon lamp is just what you need! Based on precise data from the NASA CGI Moon Kit 2019 (https://svs.

Greetings! I'm excited to present you with my Saturn Desk Lamp. This unique piece is sure to add a celestial glow to your workspace. Here's what you'll need to assemble this lamp: a lamp socket and

If you like to share the print be sure to tag us @kitkard3 Let's continue with rockets ! Who doesn't like the starship, the biggest rocket currently bui

Hey, this is a re-upload. The old version had the wrong texture map and I could not fix it, so here is a re-upload with fixed textures. This is a Moon Lithopane for you to remix. It's based on actual

Hey, Discover my Mars Night Light, crafted with attention to detail for a serene and realistic marslit ambiance! Here's your guide to printing it, but remember, you'll need to buy a lamp socket and

Demo model, files with separate parts will be available for download at Patreon https://www.patreon.com/AlienExplorer and https://cults3d.com/en/users/AlienExplorer/3d-models Support our work with you

No support Print-in-place the Rocket Dock for the Switch! 🚀 This model is super cool and fun to print. It lets you dock your Switch in style and launch it into space (not literally, of course).

Greetings! I'm excited to present you with my Moon Desk Lamp. This unique piece is sure to add a celestial glow to your workspace. Here's what you'll need to assemble this lamp: a lamp socket and a

Lunar Catch Crater: The crater Copernicus is one of the more dramatic craters; the center of Copernicus is about 93 kilometers across. i printed in 75% x and y scale I butchered some NASA open-data

Consider following me on Instagram (@SMACKMAX_). I try to post all of my projects to build a portfolio of my projects, often in advance of publishing the models. https://www.instagram.com/smackmax_/

This is for Commercial Licensing If you want to print and sell my designs, you’ll need to become a Thangs member. To keep things simple, the **digital files for this model are hosted exclusivel