TPU Bumper for the bottom of Yeti bottles. Printed with 1 wall at .6mm and low infill for cushioning. 

Yeti Rambler Boot

Cushioned stock attachment for KelTec Sub2000. Many aftermarket pads required drilling holes and running bolts through the stock. Printed in TPU this one slides up from the bottom without any hardware.

Slicer Settings w/.6mm nozzle:
 .2mm layer height, 20 mm/s
1 wall, 20% "3D cross" infill
Print in "upright" orientation with the narrow bottom on the build plate and the fork at the top.

Sub2K bumper v2.stl

Cushioned stock attachment for KelTec Sub2000. Many aftermarket pads required drilling holes and running bolts through the stock. Printed in TPU this one slides up from the bottom without any hardware.

Slicer Settings w/.6mm nozzle:
 .2mm layer height, 20 mm/s
1 wall, 20% "3D cross" infill

Small tank décor for fish to hide in. Holes for suction cups to keep on aquarium glass. 100mm long and ~70mm diameter. Print in PETG for water tightness

Aquarium Fish tube

Small tank décor for fish to hide in. 100mm long and ~70mm diameter. Print in PETG for water tightness

Aquarium Fish tube.stl

Card divider set numbered 1-6 and a blank. Large cutout to aid with grabbing cards. 
Designed to organize my Magic the Gathering card storage boxes.
100mm X 70mm X 1.2mm

Card Dividers

card divider blank.stl

A nozzle for an aquarium siphon to get into tight spaces. Nozzle 2 has a smaller opening without the curvature of the 1st.
Printed in T-Glase and PETG to keep it as fish friendly (as possible).

Aquarium Siphon Nozzle

Siphon Nozzle.stl

Remix of [https://www.thingiverse.com/thing:2238190](url)
Added a lip at the bottom to prevent the card from falling out if tolerances were loose. Also beefed up the lanyard loop to prevent breakage.

Nasa badge v2

Remix of [https://www.thingiverse.com/thing:2238190](url)
Added a lip at the bottom to prevent the card from falling out if tolerances were loose.

Nasa badge v2.stl

Holds a digital thermometer display for a fish tank. The suction cups always failed after a few weeks.

Aquarium thermometer hook

Designed a simple over door hook for bathroom towels. Fits over doors <36mm thick.

Printed in PLA+ with 2.4mm walls and 50% infill. Might be overkill but its very sturdy.

Added 2nd version to fit over cubicle walls <80mm thick.

Over-door hook

Designed a simple over door hook for bathroom towels. Fits over doors <36mm thick.

Printed in PLA+ with 2.4mm walls and 50% infill. Might be overkill but its very sturdy.

Made a phone holder to prevent the phone from sliding and the cable from flexing at the port. Fits a 2020 Veloster.

Avoid PLA unless you want floppy plastic after a day in the sun. Print sideways on the wall. I used 0 top layers to expose the infill

Phone Wedge for Veloster

Made a phone holder to prevent the phone from sliding and the cable from flexing at the port. Fits a 2020 Veloster.

Avoid PLA unless you want floppy plastic after a day in the sun.

Prevents wire shelves in freezer from shifting enough to fall out.

Freezer shelf spacer

Sign for hanging above the office ramp / door. Printed in PLA with 3 color changes.

Down Ramp Sign 

Sign for hanging above the office ramp / door.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

acampaneria143