i made this to hold my filament spools center balanced.
it uses the stock ender spool holder.\

the 2 halves fit together with notches in one end, around the stock holder.  then the spool centering nuts (2 needed) screw on to it.

once tightened to the filament spool, the whole thing spins around the stock holder.

use supports.

ender spool holder

thd tub_s3a.stl

this is an optimized filament guide that uses a bearing v groove pulley to guide the filament to the extruder.

i bought the v groove pulleys here:  https://www.amazon.com/gp/product/B079GSTHSX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

use supports

filament guide bearing pulley ender 3

this is a simple spool holder the keeps the spool centered. it replaces the original one.
it uses the same nut to secure it on the arm holder.

this eliminates the wobble of the spool that the original spool holder has.

included sleeve (make 2, one for each side of the spool).  for spools that get caught on threads.

1 gripper ring is needed.  screw on till close enough to keep spool sleeves from sliding off the spool.  but do not make tight.

can handle spools with bigger center holes. just use without the sleeves, the end rings are tapered for this.

ender 3 spool holder v5

sh5 thrd.stl

this hangs on the shower door to hold bars of soap.

print upside down.

no supports needed. 

shower soap holder

this hangs on the shower door to hold bars of soap.

Grogu bunny

Group1343

protects the switch from being switched.
slide up  to give access to switch to down position.

switch protect minimal

directs the sound to your face instead of letting sound go down and away.     works with pixel 3a and iphone, or u can modify it to fit your phone.

phone amplifier

i made this to hold the scaps like supports, brim, whatever scraps i made have in the using the 3d printer.

scrap box

sb.stl

sb.3mf

is like the speedy stitcher awl but for a sewing needle. uses sewing bobbins sizes m and 15 and l.   

sewing stitcher

handle.stl

ender 3 v2 control knob

slides onto a table to hold soldering iron.
slide onto side if table, then slide in cord through small slit, then, the rest iron in hole.

i uploaded a optimized version and standard version.

use supports. supports for hole aren't needed.

soldering iron holder

si ic.stl

a very light holder for a led strip to go around the nozzle/fan to light up the bed area.

the idea is for a 1 strip system.

use supports. 


led holder _ ender 3 v2

a very light holder for a led strip to go around the nozzle/fan to light up the bed area.

the led strip i have is from  a 2 strip lighting system for the frame. i am using it for the led holder. but the idea is for a 1 strip system.

the black pic is without the lights on!

the other pics are with  only the leds on and no background lights on any kind!

use supports. duh.

see a vid here:
https://youtu.be/6c1m4-y-9MU

ender 3 v2 led holder

bottle cutter adj.

bc_3 body.stl

 made this for the ender 3 v2 but will work with all ender 3.

it locks in position so that retractions dont move it.

it uses any regular bowden filament tube so that the filament glides smoothly.

filament guide using filament tube

fast belt buckle 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5136644.

a minimal z axis adjuster for the neje 30/40 watt laser.

just 1 small part.

but you will need to buy a 5mm bolt and a 5mm heat insert.

the adjuster is secured via the 2 rear fan screws.

no supports.

neje z axis minimal

heres a nail bed for a laser cutter to cut out.
the nail is sized it for are 1.6mm x 25mm. get em here: https://www.amazon.com/dp/B08VW552CJ/?coliid=I9Y3D5CL21HDW&colid=3N6MZSGRXMAZK&psc=1&ref_=lv_ov_lig_dp_it]
for 7$ u get 500 nail which is more than enough for this bed.

all u need do is insert the nails into the holes from the bottom.

laser nail bed dxf

nail bed for laser bed. uses nails like here: https://www.amazon.com/dp/B08VW552CJ/?coliid=I9Y3D5CL21HDW&colid=3N6MZSGRXMAZK&psc=1&ref_=lv_ov_lig_dp_it
nails go up through the bottom.

laser nail bed holder

nb.obj

i made this rocker housing for the switch that comes with the Yo-Cresci Intl LED Light set up for the Creality Ender 3, Ender 3 Pro, and Ender V2.

theirs need to remove rubber foot and endpiece to slide on.

mine/this one just snaps on the rail.

Rocker housing snapin

neje za 3 body.obj

neje za laser cut3 Solid2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2646199.

inspired by octo kinetic sculpture.
isin inches so convert to mm if u dont have simplify3d.

supports needed only on the 8, s shaped cups.

by Anthony Howe
checkP; https://www.youtube.com/watch?v=PIbk4AKFMTc

* i changed the ring to fit to the stand better.
* i made the sleeves fit better.
*i made the stand easier to print.


octo kinetic sculpture

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3152587.

this is a free scan of a sculpt by georges gardet.  i thot someone may want it.
i included the original file but it is 39 megs.

cat and snake

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4491016.

i remixed this to fit any size marker to use with airbrush.

i obviously made cosmetic changes too.

screw may be very tight but should get it in with some effort.  else use 3/8-16 screw or tap.

to use, put in marker and tighten with screw.

i also made a lightweight version that uses half as much filament.

any marker holder for airbrush 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2871641.

merida from brave

Merida hollow

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2973901.

remix of Microtech Jagdkommando by Nikola Svilar: https://grabcad.com/library/microtech-jagdkommando-2

all i did was make it so that the blade and handle can be printed in separate pieces and the screwed together with a screw. the rest was already done by nikola.

Microtech Jagdkommando remix v2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4112649.

i made a toilet paper designed with generative design software for maximun strength and least material and least cost to make.
to use i use gorilla double sided tape to stick to my wall.

needs supports

it is in inches, so dont be alarmed if the size isnt what u expect. in case se other slicers other than simplify3d. i use simplify3d and it recognizes the difference between metric and inches.

generative design toilet paper holder 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3165154.

this is a batman i found on the web.  thot u might like to print it.

inches.

batman pose

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3518215.

a cpl of dragon fountains with a bell fountain top.

one top piece is included cuz both fountains use the same top piece.

dragon bell fountain

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2641686.

this holder/squeezer holds the tube while u push down on the squeezer to extract toothpaste. the toothpaste tube will hang down as you slide the squeezer down the tube.
you slide the toothpaste tube end  through the squeezer slot first ,  then fold the end of the tube at 90 degree angle to slide in the slot in the holder. this keeps the tube from coming out.
then slide squeezer down the tube to extract toothpaste.

toothpaste holder/squeezer v2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4538885.

a Tinkerbell sculpt.  

print no less than original (which is in inches) or will lose fingers.
fingers are very fragile. take great care.

can be printed smaller if using a resin printer.

use supports.

Tinkerbell

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2685451.

snoopy

see 3d view here: https://skfb.ly/6v7tp

snoopy

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1831518.

this is a bolt action toy gun. that don't shoot anything. its just a design idea.

bolt action gun

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2825772.

scale light switch plate
(in inches)

scale light switch plate

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2933762.

this holds 2 bars of soap

double soap dish v3

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3023102.

this is a remix of Deadpool Bust by HappyMoon .

edit 1: i made it a hollow shell.

deadpool bust remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3490528.

Customized version of https://www.thingiverse.com/thing:2239307

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2239307



My Customized Satisfying Twist Container

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4000077.

made this to hold the amazon echo dot.

it is in inches so convert to mm.


baby groot echo dot 2 holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3476578.

i made this version to take less time to print.  so i shortened it and slotted the bottom out.

use supports as in my picture.

***
added a step file.
added a closer fitting lid with gripping area.
added a bottom file.
the added lid and bottom and the step files are in inches.   so you will need to covert to metric.

qtip dispenser v2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2417526.

this is a gun design prop, with the barrel being held  by a spring.  you push the bbl forward against spring to remove dummy bullet.  you can push bbl forward and lift to remove bbl.
spring is used as a silencer/baffle too.

gun prop-spring bbl hold

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2137240.

a warrior lady

dragon warrior

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2088316.

elsa salt and pepper shaker
the bottom screw screws into the threaded area at the bottom of elsas skirt. .  this is where you put the salt or pepper.
make 2.   1 for salt and 1 for pepper.   in colors of your liking.

it uses a  3 mm (appx) hex wrench which is  included. .    it has a shorter reach to fit in the dress to base area. 

 import to your slicer in inches.

elsa salt and pepper shakers

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2840356.

this has a place to holds led and battery to light up the groot. the ledslides over the battery in its place in the back slide in door.
 with no supports and with no infill but with 3 inner and outer and top shells.
0% infill
use supports only at the back door which holds the led.

baby groot led light

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2583479.

fish food tongs

fish food tongs

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2846469.

  you place the plastic soda bottle into the smallest innermost ring, then screw on the cap till tight.  then fill the soda bottle with water .  then fill the glass with water up near to the cap.  then place the ring with soda bottle on glass., quickly so as not to spill the water. then you place your avocado pit down into the ring center.
 when the water level goes down the water will come out the soda bottle into the glass and stop at the same level. 
 you never have to worry bout filling the water again. except when the soda bottle is empty.

i added a ring (v6) where there are 4 holes to fit up to 4 bottles.  up to 4 times the water filling capacity.  just need to print more caps.  

avocado auto feeder v4/v6

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2626327.

a chip clip that holds the bag by compression via a clamping process. a simple lever to clamp and release.

chip clip clamp

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3024556.

i made the cutters individual for easier printing.  i added threaded nuts to hold cutters and shaft together. top snaps onto the bottom with shaft and cutters in the middle.. and it  has a hopper.   should not need supports if the pieces are placed right.

SHREDDER SE8 V2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2117049.

insert the bottom into the top part and twist to secure.


elsa salt shaker twist type

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2412740.

this shredder version lets you print the box in halves.  after placing the cutters into the bottom,  you then place the top and it snaps closed with latches on the bottom.
i included both cutters in one file  for for convenience and separately for those that want to print one at a time.


i added a ratcheting socket crank (remix of clevens pocket wrench design) so you dont have to turn all way around as with regular socket , wrench, or crank.
i included a hand crank for those of you who prefer it.
i also added a cutter with the socket built in, on the end. i liked this idea for the reason that the ratchet handle can get closer to the gear for better torque.

this could be used for shredding kitchen food to add to compost bin. which is why i made it.
or shredding veggies for salads, salsa,
smoothies, etc. for food use food safe pla.

use near 100 percent infill for strength.

ez shredder v5 with ratcheting socket crank

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1847822.

this PROP gun shows theoretically, the gas forces the slide back against the slide return spring. remove the barrel by moving the slide back enough to move the barrel back abit to move barrel back and then up and out.  . put a bullet in by moving the slide back also.  theoretically of course. THIS IS JUST A PROP GUN FOE EDUCATIONAL/PROP USE ONLY!

prop gun - blowback

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2841384.

i made this with using a simple battery and led to light baby groot up.
there are 2 holes in the battery holder for the led leads to go into to make contact with the battery. the battery and its holder stay outside but led goes inside groot.   i bent the wires of the led so the led bulb goes upward into groots insides.
i made mine with clear pla but white might be better or any other color would look nice.
0% infill,  no supports except on the battery holder.
 i use 3 in and out and top shells, tho i dont know if this makes a difference.

watch it work:  https://youtu.be/sIRmeB926NA

baby groot led light v4

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

vegveg1988