Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2995403.

Hello Thingiverse!

Let me present you my new abstract vase. I designed it to be satisfying to look at, have a nice reflections in sun and to be easy to print. 

I take about 2 and half hour to print it with 0.4 mm noozle and 0.2 mm layer height.

Feel free to print it with other materials and don't forget to share your results :)

PLA Verigo Grey, Rapunzel Silver and Gold Happens by Fillamentum.
CPE HG100 Deep Sea Transparent and Neon Yellow Transparent by Fillamentum and PETG Transparent Green by PM

Enjoy it!

Abstract Vase

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3845689.

Did you ever struggle with wet filament? It's hard to print materials like PETG, CPE or Nylons and even harder to store them in a dry environment. Easiest is to buy a box of color-changing silica gel, print a few containers and slide it inside a spool and let the magic work. Even better is to vacuum seal your spool inside a bag and I promise, that you'll never have to deal with a wet spool of the material. 

I made a simple container with wents small enough to prevent falling little balls of silica gel out of it. Also, there are enough holes to suck humidity out of your filament. Because not every spool has the same inside diameter and not every printer is accurate I made curved thin walls that act as a spring. It doesn't matter if you print it in PLA or PETG, both material works flawlessly. I made it for dual extruder, but you can print it without the text and the result is also amazing. 

When your silica gel change color from original to darker you just take off the lid, dry it inside the oven, in a food dehydrator or on the print bed and you can use it again. Just give it a try and you'll see if it suits your needs.

Happy printing

Silica gel Universal spool box

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3238739.

Hello Everyone,
 Christmas is coming and why not to use your 3D printer to make some decorations for your tree or even just to hang it somewhere. I had an idea to make just regular 40 mm Christmas ball, but the ball is difficult to print and I wanted it to be 2 color. So I just spliced it in 3 pieces, print it in 2 colors, glued it together and that's it!! 

UPDATE: Added separate STL for each piece.

You don't need any supports, no multi-material. Just your regular 3D printer, more colors of the filament and you're ready to go! Pick whatever colors you want, try to make it as perfect as you want and share your colorful combinations with others.

Merry Christmas to you all


Christmas ball decoration (Multicolor, easy to print, no supports)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3388160.

I was always fascinated by space and jealous of those, who were outside of our world. So I wanted something to have in front of me every day. So I designed simple coasters with old NASA worm logo and print it with Fillamentum PLA on my Ender 3 with Mosaic Palette 2. You can use any other multi-material, dual extruder or just print it as 2 separate files and then glue it in place.  

Enjoy it

NASA coasters for dual extrusion, multi material or single nozzle printers

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3059490.

Hello, I did a bit remixed version of Chewbacca. I used spring from regular pen and it wasn't that good. So why shouldn't print some spring for it to make it even cooler right? 

I used:
Polymaker PolyWood (for body)
Fillamentum Vertigo Grey (for base)
Fillamentum Flexfill 92A "Signal Red" (for TPU spring) (98A should work as well, maybe it'll be a bit stiffer)

Feel free to make your own :)

Chewbacca BobbleHead TPU spring

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

zaky20

Abstract Vase

Silica gel Universal spool box

Christmas ball decoration (Multicolor, easy to print, no supports)

NASA coasters for dual extrusion, multi material or single nozzle printers

Chewbacca BobbleHead TPU spring