A mount that enables you to use your Wyze Cam 3 with the P1S

A simple mount for the Tapo C110/C100 camera that uses the screw connection of the hinge. There are 8x3mm magnets embedded to support it, these can be used optionally if there are slight noises. &nbsp

The camera for the P1P and P1S is mostly useless, this allows you to use a tapo C100 for a real time cam

Remixed the two models together to make what I think is an ideal setup.   Made to use the Bambu Lab LED kit, you may be able to use other “puck” type LED lights.   I suggest printing in PETG

Mount to attach a Blink Mini Camera to a P1S/X1 series to the door. Will NOT work on a P1P.

This a simple camera mount using the blink mini camera

I redid the original mount from JohnPepsi and adapted some from Trevstein96 to make a solid mount that just slides into place. No screws, glue or tape required. I used supports and came out great. Wil

This is an enclosure that's designed to house the IMX708/Raspberry Pi cameras inside a Bambu Labs P1S 3d printer.

This is a Bu Stik mount addon for the TP-Link Tapo C100 security camera.

I really liked the idea that tiffi226 came up with by putting a mount on the door hinge of the Bambu Labs printers. Their design reduces glare significantly but I didn't like how you could still s

Wanted a higher framerate camera for my P1S so I designed a mount for a Pi 3A+ I had lying around and a cheap Pi Camera. I printed in PETG as I worried PLA might soften if printing with the door close

This is a mount for the Raspberry Pi Camera Module V3.

Mount to attach a Blink Mini cam to monitor your print. Attaches to the top hinge of the door. You will need 2 M3x6 screws to replace the screws on your top hinge. And a Blink Mini, of course. You can

Since the printer's internal camera only displays an image every few seconds, I created a holder for the Tapo C110.

Description   Side facing door mount for Mijia/xiaomi 360 2k cameras for Bambu Lab printers. Features : Door can be fully opened without needing to move the camera Camera angled slightly down at

This is my creation to mount a camera on the A1 Mini stepper. The main reason for doing this is 1) because the camera on the A1 mini is so poor and 2) so I can use spaghetti detection in OctoEverywher

Replaces the BL Lid Handle and screws to the glass directly.

Bambu lab P1/X1 Magnetic mount for IP camera TAPO C100/C110

After upgrading my P1P to a P1S I found my previous mount for my WyzeCam would no longer be useful. This solution enables you to still monitor your prints without worrying about opening or closing the

Wyze V2 and V3 Camera mount remix for Bambu Lab P1P. Has 2 m3x6 mounting holes for artistry modplate shell or any other that doesnt allow mounting to actual frame. for armour plate mod, artistry mod..

Remix of https://www.printables.com/model/482778-bambua-lab-x1-rear-mount-camera to reduce light exposure to the cam

Quick simple mount i made to use the blink mini camera that can be bought in your area from a hardware store or cheap on amazon around 35 dollars I made 2 different prints one with a mounting hole and

this is a upgrade to my first model as someone asked if I can make it fit a Nest cam thanks to Matt Blackledge for all the feed back on getting this to fit he's camera and being the guinea pig The bas

This is a mount for the Raspberry Pi Camera Module V3.

added a connector that snaps to A1

This is a camera mount for the WYZE camera (v2 and v3) on the P1P.

P1P camera mount

Camera mount for Xiaomi Mi Home Security Camera 2K Camera for P1P This is a remix of Bambu P1P Wansview Q5 Camera Mount.

Hello Guys , I tried to make a mount for the Go pro camera on the P1s. Inspired by the mount for the Tapo c110. But because i use my Go Pro for Timelapse video's i wanted to remake a mount for it. Hop

WYZE v2 - P1P Camera Mount - (Bambu Lab P1P)

Wyze Camera v2 mount for the excellent blu_stik system

This is a remix of a design from “Holger” on printables: Bambua Lab X1 Rear Mount Camera by Holger | Download free STL model | Printables.com   I used it with with original Raspberry pi camera, a

Changed how the Raspberry Pi Camera Module 3 was mounted, so it is now 180° (upside down landscape) rather than 90° (portrait). Increased the overall size to make the mount friction fit into the P1S c

Remix of PrinterPro's Wyze camera mount.

Yi Camera 1080 wifi camera mount for P1P Remix you can also use the USB port on the P1P to power the Camera

Holds the Pi cam in an upright orientation with routing guides to keep the cable away from moving parts.

Camera mount for the Xiaomi Yi Camera to attach it to the A1 or A1 mini. Holds both the usb cable and the extruder cable in a solid position.   2 versions - one for the A1 and one for the A1 Mini

A modular holder that can be used in various situations and for different needs

Full Install + Setup Guide: https://youtu.be/dRUDWmKcU10 Amazon link to Tapo C110: https://www.amazon.com/dp/B09YL5G1Y8?psc=1&ref=ppx_yo2ov_dt_b_product_details Camera mount for the TP-Link Tapo C11

This is version 2 of my popular Wyze Cam mount. This one is adjustable so you can move it up/down - Closer/Further from the print surface. Now with Beagle + Blink Mini Support. (See Links Below) Th

A simple Raspberry Pi Camera mount for the "Freenove 8MP" camera I found on Amazon.ca

I loved the original design by Janb as it enables the camera to follow the print as it builds and is not obstructed by the bed. I found that the size of the

This allows you to mount a Raspberry Pi V1/2 camera with a Neopixel LED strip to your Creality Ender 3 v2 Neo printer.

Fixing for a 36x56cm IKEA SKADIS pegboard using the void area in the AMS moulding.

With this mod, you can install Creality's Nebula camera on your Ender 3 V3 KE without the need for screws or additional

A simple solution to remote monitoring using an inexpensive Blink Mini Cam for your Ender 3 V3 SE.

Remix from the M5c GoPro Mount (https://www.printables.com/model/581613-ankermake-m5c-gopro-mount) This is a mod to work with the existing 20/20 camera mount system: (https://www.thingiverse.com/thin

Right-side tray for Ender 3 V3 SE includes a Cameral Mount for a Blink Mini Camera and a Nozzle Tray

Designed as a universal camera mount for the Anycubic Kobra 2 max

Kingroom kpl1 V2 camera mount for Logitech C270 (Not sure if it will fit V1) you will need 2 screws M3 6mm 1 screw M3