I've seen these sub hooks being sold that fit over a coat hangar to allow accessories or even another coat hangar to be dangled from.  A simple idea that can be easily reproduced with a 3D printer and at a low cost.

Here is my design that duplicates the functionality of the hooks.  The choice of 3D filament type is open.

My print is made with eSUN PLA+ 1.75mm Orange filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer. No supports required.  No printing rafts required, but support for the hole will improve the print finish.

I hope that you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For my latest models, see my main uploads site:
https://makerworld.com/en/u/3687936443

Hangar Sub Hook

Hook.stl

The Honda Wing logo started life in 1947, just prior to the formation of the Honda Motor Company, by Soichiro Honda himself as a symbol of his dream for the future success of his business.  The latest wing design first appeared in motorcross from 1973/74.  It's an ode to freedom, speed, and the soaring sensation that comes with riding a bike.

I've reproduced a likeness to the logo and made it 3D printable.

My print is made in eSUN PLA+ Black and PLA eSilk Gold filaments, with 0.2mm layer height and 15% infill on a Bambu Lab X1 Carbon printer.  An AMS is used for colour changes.  No supports required.

I hope that you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site:
https://makerworld.com/en/u/3687936443


Honda Moto Logos

Goldwing Moto.stl

Being a proud owner of a Tesla Model 3, I was looking for ways to improve my car use experience.  I do find that shopping bags can fall and lose their content into the boot of the car.  Placing the bag into one of the car's bays is one approach, but a trunk hanging hook is a simple approach, too.  The Model 3 (and Y) have a protruding M6 bolt which can be utilised for a hook mount.

There are other similar trunk hook designs available for download, never-the-less I decided to create my own design.  My design had to meet the following criteria:
   - Be strong.
   - Be straightforward to print.
   - Be able to handle the high temperatures common in cars.

I ended up choosing PETG filament to make the hook with.  Fitted to the printed part is a M6x15mm metal screw insert similar to the following part:
https://www.boltandnut.com.au/m6-x-18mm-1-00p-metric-coarse-zinc-flange-threaded-timber-insert-nuts-low-tensile

Here is my 3D design.  My design may match your needs, too.

My print is made with eSUN PETG 1.75mm Black filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer.  Wall Loops = 6; Infill = 25%.  No Supports required.

I hope that you can find this design useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site:
https://makerworld.com/en/u/3687936443


Tesla Model 3 Trunk Hook

I managed to misplace (lose!) my vacuum concetrator nozzle fitting for my Makita DCL180Z 18V LxT vacuum cleaner.  The concentrator is a useful fitting, so decided to design and print a replacement part.

My concentrator part is about 130mm long.  Printing a longer length nozzle would need to be printed with a "raft" to improved the print bed surface area adherence.  The shorter length nozzle is quite effective and works nicely.

My print is made with eSUN PETG 1.75mm Blue filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer. No supports required.  Wall Loops = 4.  Brim recommended.

I hope that you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site:
https://makerworld.com/en/u/3687936443


Makita Vacuum Concentrator Fitting

Makita Concentrator.stl

Here is my design for a token playing card, the Ace of Spades.  The card dimensions are about 78 x 51mm and 2mm thick.

If the card is not to your preferred dimensions, consider scaling the print file in your slicer software.

My print is made in 1.75mm eSUN PLA+ White and Black filaments, with 0.2mm layer height and 15% infill on a Bambu Lab X1 Carbon printer.  An AMS unit is used to interleave the filament colours.  Print supports are not required.

I hope that you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

Ace of Spades

Ace Card.stl

I have on one of my past projects some M6 nuts that can come loose.  So I have a need to adjust the nut tension every so often.  I want to be able to just finger tighten the nut and don't want to go out and buy metal butterfly/wing nuts.

My simple solution to my butterfly nut needs was to 3D print a part that fits around the existing M6 nut providing the "wings" to finger tighten the nut.  The printed part colour also matches nicely with the past project colour.  There's a thin printed layer on the printed part to go on the bolt side of the nut to keep the butterfly nut in-place.  This thin layer is only 0.2mm, so won't demand much from the bolt length.

Here is my 3D design.  My design may match your needs, too.

My print is made with eSUN PETG 1.75mm Orange filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer. No supports required.

I hope that you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site:
https://makerworld.com/en/u/3687936443

Butterfly or Wing Nut M6

Wing Nut.3mf

If all you want is a bolt that can be thumb tightened, here is a way to get there.  The M4 bolt I used has a hex head with measurement of about 7mm across (flat-to-flat) and a depth of 3mm.  My thumb screw part sits around the bolt head which can be secured with a suitable glue, eg. CA glue, Epoxy resin.

My print is made in 1.75mm eSUN PLA+ filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer.  Print supports are not required.

I hope that you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site:
https://makerworld.com/en/u/3687936443

Thumb Screw Head

Thumb Screw.stl

This is a 3D printable 12mm mount for a pneumatic PC4-10 connector.  The mount secures to a thin panel's 12mm hole via a 3D printable nut.  The PC4-10 can accept a 4mm PTFE tube.

The PC4-10 connector is a common pneumatic part and can be sourced from multiple sources.

These 3D printed nuts and bolts should only be finger tightened.  Care!  Over tightening of the nut will sheer the screw from its head.

Here is my 3D design.  My design may match your needs, too.

My print is made in 1.75mm eSUN PLA+ Black filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer. Optionally set Wall Loops = 4. No print supports, rafts nor brims required.

I hope that you can find this design useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.
For more of my models, see my main uploads site at MakerWorld as “Wiseone”...
https://makerworld.com/en/u/3687936443

Pneumatic PC4-10 Mount (PTFE)

Screw.stl

Here is a holster for my Leatherman Wave Classic (the original Wave tool) multitool.  I like that I can remove and replace the multitool with one hand, quickly and easily.  Other holsters I have seen rely on friction or a flap to keep the mutlitool in-place; not either convenient nor secure for my needs.

The holster retains the knife in position with a Neodymium magnet.  The holster secures to your belt with an integrated belt clip.  The belt clip supports belts up to 38mm (1.5in).

I use a salvaged Neodymium magnet from an old 3.5in hard drive, used without the metal plate.  The magnet is curved and about 31 x 13 x 1.25mm in size.  Other similar sized magnets may work, but test the magnetic hold strength to ensure that the tool can be held in-place during your intended activities.  I secured the magnet to the printed holster with CA (Super) glue.

The belt clip attaches to the holster via two self-tapping countersunk 3mm x 7mm screws.

To note, the current Leatherman Wave tool is the Wave+.  Unfortunately, the tool dimensions have changed enough to not fit into my current holster design.  If someone can direct me to complete and accurate measurements for the current Wave+, I'd consider releasing a revised holster to fit.

My print is made in 1.75mm eSUN PLA+ filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer.  Print supports are not required.  Parts are by default orientated in the way I printed them on the print bed, which should give it maximum strength.  Probably wise to include a brim when printing the belt clip part vertically.

I hope you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site at MakerWorld as “Wiseone”.

For more of my models, see my main uploads site:
https://makerworld.com/en/u/3687936443

Leatherman Wave (Classic) Holster

Holster.stl

My metal tweezers invariably get magnetised from general use.  Normally getting magnetised is not a problem and can be demagnetised with some effort, too.  The magnetism becomes an nuisance when handling small nuts and bolts that I often do.

Instead of constantly fiddling with my demagnetiser, I decided to design my own non-metallic tweezers.  These tweezers are made with PLA-CF and have very good rigidity, hence spring open nicely.

I've shared two tweezers with different tips, large and small, respectively.

My print is made in Bambu Lab PLA-CF 1.75mm Burgundy Red filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer. No supports required.  Wall Loops = 4.

I hope you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site at MakerWorld as “Wiseone”.
https://makerworld.com/en/u/3687936443

Tweezers (2 types)

Tweezers - Small Tip.stl

The Nitecore Digicharger D4 is my go to charger for my Eneloop and 18650 rechargeable batteries.  It delivers a decent battery current and can do one to four cells, simultaneously.  It's open top design allows batteries to be inserted and removed quickly, but overtime, allows the inside to collect dust.  My cover design, when regularly used, significantly reduces dust from accumulating inside the battery compartment.

The cover can be used on the battery charger with batteries inserted or not.  The cover also allows heat ventilation for charging batteries.  The plastic filament to use for the 3D print is unimportant.

My print is made in 1.75mm Bambu PLA-CF filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer.  Print supports are not required.

I hope that you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site:
https://makerworld.com/en/u/3687936443

Nitecore D4 Charger Dust Cover

Cover.stl

This project is for those that have a need to spin yarn into a tightly meshed ball so that the yarn can be neatly stored or used.  There are inexpensive manual yarn winders for this spinning purpose.  These winders typically have a handle for the user to rotate to spin the yarn and cost typically US$20-30.  Powered winders are also available, but at a much higher price of US$300-600.

My project creates an electrically powered yarn winder.  The electric winder sources some parts from a manual winder, adds an electric motor, all combined with custom designed 3D printed parts and power by USB-C.

I welcome those wishing to reproduce my yarn spinner as I built it.  I do warn, this project is for an experienced builder.  The following skills will be required:
- Ability to cut steel
- Ability to source like components.
- Ability to 3D print my designed parts.
- Ability to solder electrical wires.

Parts List:
- Yarn spinner (for parts)
- 3D printed parts.
- RS445-ST/18140/DV DC motor with 14 pins fitted gear.
- MT3608 DC-DC inverter module.
- 5mm 40mm bolt, washers and 2 nuts.
- 6mm 20mm bolt, washers and 2 nuts.
- Toggle switch SPST
- USB-C panel mount socket.
- Potentiometer 20KOhm, panel mount.
- Resistor 10 Ohm, 0.25W
- 5V LED indicator
- 6mm knob
- Electrical wire, typically 22awg.

To get sufficient torque from the electric motor, gears are used.  The two motor drive gears provide a ratio of about 3:1, transforming surplus speed into extra torque.

The DC motor I used is a salvaged RS445-ST/18140/DV motor with a metal gear with 14 teeth. Ø=34mm x 52mm and weighs about 90g.  These motors can be purchased new or used for around US$10.
eg. https://www.ebay.com/itm/295128355202

The electric motor is a nominal 12V DC.  I control the motor speed by starting with 5V from a USB source and via a buck inverter (MT3608), vary the voltage from 5 to around 12V.  The motor typical is running at 3-4W of power, hence a simple 5W USB plug pack can comfortably power the unit.

My print is made with eSUN PLA+ 1.75mm red filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer. See 3MF for brim advice.  Supports are not required, but can improve the finish of some parts.

I hope you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site:
https://makerworld.com/en/u/3687936443

Powered Yarn Spinner

Case - Base.stl

If you only need a small number of wire clamps, here's a quick way to satisfy that need, 3D print them.  I never have the right size wire clamp on-hand.  To resolve that issue, I just print the sizes and quantities I need at the time.

Here is my design that includes a clamp suitable for the following three wire sizes, 4, 6 and 8mm.  The mounting screw hole is optimised for a 3.5mm countersunk self-tapping screw.

I used PLA+, but most materials are suitable to make a clamp.  So, choose filament type based on environmental conditions and clamp strength/flexibilty required.

My print is made in eSUN PLA+ 1.75mm White/Blue/Red filaments, with 0.2mm layer height and 100% infill on a Bambu X1 Carbon printer. No supports required.  Brim recommended.

I hope you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site:
https://makerworld.com/en/u/3687936443

Wire Clamp (3 sizes)

Wire Clamp 8mm.stl

What do you give someone whom has everything?  Well, how-about a pet rock named Sandy?  Be the envy of all your friends and get your first pet rock, now!  Make multiple and share them around, each in their own unique character-building colour.

- Sandy can be trained to "sit", "play dead", and maybe even to "roll".
- Comes with its own name plate.
- Makes an excellent family pet.
- Doesn't bark nor make noise to disturb the neighbours.
- Doesn't eat much.
- Great for kids to learn responsibility to look after it.
- Won't run away!

Here is my 3D design.  My design may match your needs, too.

My rock is made in 1.75mm Bambu Lab Burgundy Red PLA-CF filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer.  the base is made with eSUN Black and the name plate is made in eSUN Silk Gold (adds a quality touch).

I hope that you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site:
https://makerworld.com/en/u/3687936443

Sandy the Pet Rock

Rock.stl

It's important to keep your workbench clear from clutter.  My Foredom like handpiece ends up on my workbench, so I designed this simple mount to securely hold the handpiece whilst not directly in use.  The mount accepts two 3.5mm pan head screws.  Orientation of the mount is unimportant for my needs.

The mount has a inner diameter of 26mm, so it maybe useful for other uses, as well.

My print is made in PLA 1.75mm Prusament silver filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer.  Wall Loops = 5.  No print supports required.

I hope you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site:
https://makerworld.com/en/u/3687936443

Mount for Foredom Handpiece

Holder.stl

The APX6000 is a radio commonly adopted in enterprise solutions and by emergency service organisations.  It's useful to clip the radio to your belt and operate the radio via a wired microphone.

We never seem to have enough belt clips for all our radios.  Replacement belt clips are expensive, too.  Here is my design for a belt clip that will do an effective job to secure the radio to your belt.

The clip can be made in most plastics, though I would not recommend straight PLA due to it being brittle.  I found PLA+ effective as it gives a bit.  Note that all types of PLA don't like being left in the sun, so if that could be a problem, go for PETG or a stronger plastic.

My print is made in 1.75mm eSUN PETG Black filament, with 0.2mm layer height and 25% infill on a Bambu Lab X1 Carbon printer.  Print supports are required.

I hope that you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site:
https://makerworld.com/en/u/3687936443


Motorola APX6000 Belt Clip

Holster and Belt Clip.3mf

Yet another bag clip. Here is a useful bag clip that tightly closes a folded plastic bag or similar.  This design is printed as a single part.

My design does not use much filament and comes in three sizes.  The three clip sizes included with clamping sizes of 60, 90 and 120mm, respectively.

For heavy and wide clamping, I've included two versions of the 120mm clamp, 10 and 12mm wide.  The 12mm wide clamp still flexes, but flexes less (my favourite).

I experimented printing the clips in PETG and PLA+.  Both gave what appeared to be quite pliable and usable clips.  I did notice that the PLA+ got more brittle whilst clamping a bag in the freezer and breaking.  In the end, it comes down to your intended use case.  PETG being the most robust of the two filaments I tried.

My prints are made with eSUN PETG 1.75mm Orange filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer.  No supports required.

I hope that you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site:
https://makerworld.com/en/u/3687936443

Bag Clip (4 versions)

Bag Clip 120x12mm.stl

Bag Clip 60mm.stl

Bag Clip 60x8mm.3mf

Bag Clip 90mm.stl

Bag Clip 90x8mm x 6.3mf

Bag Clip 90x8mm.3mf

Bag Clip 120x10mm.3mf

Bag Clip 120x10mm.stl

Bag Clip 120x12mm x 6.3mf

Bag Clip 120x12mm.3mf

Tweezers - Small Tip.3mf

Tweezers - Large Tip.3mf

Tweezers - Large Tip.stl

I'm an Electrical Engineer that likes to solve problems that includes 3D printed parts. I like creating my own designs and will share them here.

My designs collection is best described as eclectic, but each design reflects my needs at the time. Feel free to enjoy my designs for your personal needs, too.

For more of my models, see them first at my main uploads site:
[https://makerworld.com/en/u/3687936443](url)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

<div class="markdown"><p>I&#x27;m an Electrical Engineer that likes to solve problems that includes 3D printed parts. I like creating my own designs and will share them here.</p>
<p>My designs collection is best described as eclectic, but each design reflects my needs at the time. Feel free to enjoy my designs for your personal needs, too.</p>
<p>For more of my models, see them first at my main uploads site:
<a href="https://url" target="_blank" rel="noopener nofollow">https://makerworld.com/en/u/3687936443</a></p></div>

wiseone

Pinned models

Bag Clip (4 versions)

Tweezers (2 types)

Hangar Sub Hook

Honda Moto Logos

Tesla Model 3 Trunk Hook

Makita Vacuum Concentrator Fitting

Ace of Spades

Butterfly or Wing Nut M6

Thumb Screw Head

Pneumatic PC4-10 Mount (PTFE)

Leatherman Wave (Classic) Holster

Tweezers (2 types)

Nitecore D4 Charger Dust Cover

Powered Yarn Spinner

Wire Clamp (3 sizes)

Sandy the Pet Rock

Mount for Foredom Handpiece

Motorola APX6000 Belt Clip

Bag Clip (4 versions)