This is my entry for #HalloWearable / #HalloWearables

Print Settings:
Material: PLA
Wall Perimeters: 3
Layer height: 0.2 base + Adaptive layers
Infil: 15%
Supports: None
STL files are correctly oriented for printing

Estimated Print time (Ender 5) 8 hrs

Steps:
1. Print
2. Wrap hair tie around "Core"
3. Place "Core" in "Body"
4. Secure "Core" with "Screw"
5. Place "Slide" in "Body"
6. Screw "Peg" into "Slide"
7. Attach wrist strap through slots
8. Launch bottle caps at your friends

BOM:
~57g of PLA
1 "Medium hold" hair tie (I used Scunci 38400 which are 4mm, image attached)

Wrist mounted bottle cap launcher

LauncherV3.30.1.step

This is my entry for the #HalloWearable or #HalloWearables contest with Zack Freedman
SoundMask v0.16
What is an intergalactic sound being supposed to do when people won’t stop breathing on them? Well the only thing they can do: build a better mask! But better filtration isn’t enough! They won’t stop running their mouths! We must drown them out, beat them with their own game! Volume! DECIBELS! Enter the SoundMask v0.16 a half-faceplate respirator equipped to pump out upto a whopping 40W of sheer inexhaustible AUDIBLE BLISS!

Please note: the SoundMask v0.16 is not a functional respirator and should not be used in any context where such a device is deemed necessarily, local laws might govern the use of amplified music, in order to actually use the 40W advertised above one must follow the experimental guide found at the bottom of this document. The respirator has a potential to restrict breathing and your own judgement should be used before assembling or wearing the SoundMask in any context.
BOM
~136g of PLA filament
I used MatterHackers build series in white because it was what I had on hand
8 - M3x8 socket head screws
https://www.amazon.com/Socket-Screws-Machine-Thread-Quantity/dp/B07NTG92SL 
8 - M3x5x4 brass heat set inserts
https://www.amazon.com/outstanding-M3x5x4-Knurled-Threaded-Embedment/dp/B095WNHN5H
2 - Dayton Audio PS95-8 speaker drivers
https://www.amazon.com/Dayton-Audio-PS95-8-Source-Driver/dp/B00Q3M9852
https://www.parts-express.com/Dayton-Audio-PS95-8-3-1-2-Point-Source-Full-Range-Driver-8-295-349
See notes on driver selection for guidance on selecting different drivers
1 - 3M 6200 half faceplate respirator 
https://www.amazon.com/3M-Respirator-6200-Respiratory-Protection/dp/B007JZ1N00 
The interface might be compatible with other 3M respirators but this is all I have and all I tested it on, it’s modeled on a 3M 60926 cartridge so anything that is compatible with that cartridge should work.
1 - 3.5mm male plug to bare wire
https://www.amazon.com/dp/B0977CLRVR/ref=sspa_dk_detail_1
~24ft - 16 AWG wire
https://www.amazon.com/TYUMEN-Electrical-Extension-Flexible-Lighting/dp/B07SG23DT1/ 
You can probably get away with a thinner gauge but this is what I had around.
Heat shrink tubing of various sizes
https://www.amazon.com/gp/product/B07WWWPR2X 
Printing
Orientation: The interface for the respirator and the ridges should be towards the bed, this should be the default orientation in the STL
Base layer height: 0.2mm
Line width: 0.4
Wall thickness: 1.2
Top/Bottom thickness: 0.8
Infill density: 15%
Infill pattern: cubic
Supports: no
Use adaptive layers: true


Full Guide (Includes Fusion 360 archive for customization)
https://docs.google.com/document/d/18ffs_do28hCOR42V369BmnxSk9pwN9iWbu05_sV9BIo/edit?usp=sharing

Video
https://youtu.be/kHo1EqjeehY


SoundMask v0.16

Canister v16.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

will.batty

Wrist mounted bottle cap launcher

SoundMask v0.16