tracking pixel
Will B

Wrist mounted bottle cap launcher

by
will.batty
Follow
Follow
Remix Model
will.batty
will.batty
Image 1 of 7
All our parts ready for assembly.
Wrist mounted bottle cap launcher - All our parts ready for assembly. - 3d model
2D
3D
Makes
Wrist mounted bottle cap launcher - All our parts ready for assembly. - 3d model
Wrist mounted bottle cap launcher - Step 1: Wrap hair-tie around "Core" - 3d model
Wrist mounted bottle cap launcher - Step 3: Place "Core" in "Body" - 3d model
Wrist mounted bottle cap launcher - 4: Secure "Core" with "Screw" - 3d model
Wrist mounted bottle cap launcher - 5&6: Place "Slide" in "Body" & Screw "Peg" into "Slide" - 3d model
Wrist mounted bottle cap launcher - Example hair-ties - 3d model
Wrist mounted bottle cap launcher 3d model
2 Likes20 DownloadsOctober 15, 2021


This is my entry for #HalloWearable / #HalloWearables

Print Settings: Material: PLA Wall Perimeters: 3 Layer height: 0.2 base + Adaptive layers Infil: 15% Supports: None STL files are correctly oriented for printing

Estimated Print time (Ender 5) 8 hrs

Steps:

  1. Print
  2. Wrap hair tie around "Core"
  3. Place "Core" in "Body"
  4. Secure "Core" with "Screw"
  5. Place "Slide" in "Body"
  6. Screw "Peg" into "Slide"
  7. Attach wrist strap through slots
  8. Launch bottle caps at your friends

BOM: ~57g of PLA 1 "Medium hold" hair tie (I used Scunci 38400 which are 4mm, image attached)


2 Likes20 DownloadsOctober 15, 2021




2 Likes20 DownloadsOctober 15, 2021