Wrist mounted bottle cap launcher

This is my entry for #HalloWearable / #HalloWearables

Print Settings: Material: PLA Wall Perimeters: 3 Layer height: 0.2 base + Adaptive layers Infil: 15% Supports: None STL files are correctly oriented for printing

Estimated Print time (Ender 5) 8 hrs

Steps:

1. Print
2. Wrap hair tie around "Core"
3. Place "Core" in "Body"
4. Secure "Core" with "Screw"
5. Place "Slide" in "Body"
6. Screw "Peg" into "Slide"
7. Attach wrist strap through slots
8. Launch bottle caps at your friends

BOM: ~57g of PLA 1 "Medium hold" hair tie (I used Scunci 38400 which are 4mm, image attached)