This is the FREE single color version of the Skull Rose:)
Join us on Patreon where you can a lot of different Skull Rose versions, ring, pendant, hanger and 2 fully painted multicolor 3mf formats too:
https://www.patreon.com/posts/117883448
Also, our 3 Baby Elemental dragons are out now:
-Baby Fire Elemental Dragon
-Baby Earth Elemental Dragon
-Baby Ice Elemental Dragon
Recommended filaments:
If you want to paint on:
-Bambu Matte PLA (white)
If you plan to print without painting:
-Bambu Dual Silk PLA or
-Bambu Gradient PLA
Printed on:
-Bambu P1S
Print difficulty level: Beginner
Recommended print settings:
-Layer height: 0.2mm
-Wall loops: 2
-Infill: 8%, Gyroid
-Supports: Auto Tree supports, TopZ distance 0.28, BottomZ 0.2 (it will add a little amount of supports under the some of the leaf parts)
Painting and post-processing instructions (optional, you can always just go straight for painting if you don't mind the layer lines as much, or use pretty gradient, silk or dual silk filaments too, which gives pretty colors without the need of painting)
(Also if you have a multi-color AMS printer, you can also just print the colored 3mf file, but in our opinion, a real post-processing will always give a more real lifelike touch and originality to the prints!)
Post-processing steps:
-
Sanding: Start with coarse sandpaper (120 grit) to smooth layer lines, then use finer grits (220) and lastly (400-600) for a more polished surface.
-
Filler Primer: Apply a filler primer coat to cover imperfections. Let it dry completely.
-
Wet Sanding: Use 400-600 grit sandpaper for wet sanding the primer, repeating as needed for smoothness.
-
Final Primer Coat: Apply a thin layer of regular primer to create an even base for painting.
-
Painting & Sealing: Paint with your chosen colors from the acrylic paint set, then apply a clear coat (matte or glossy) for protection and finish.
(Allow each layer to dry fully before moving to the next for the best results.)
Join us on patreon and get instant access to all our models!
You can check them all out here: https://www.patreon.com/SEREV3d
-new models being released every 2-3 days
- If you wish to sell the 3d prints you make from our designs, get your Serev3d Authorized Seller Badge upon joining our paid Patreon membership we'll place your contacts of your store on our Authorized Sellers' List