Jack Skellington Pumpkin - SEREV3d

The spooky season is getting closer and closer! Have fun printing our Jack Skellington Pumpkin inspired by Jack from Nightmare before Christmas! If you sign up on our Patreon you can also access a Candy Bucket, Planter and Keychain version of it for FREE: ▶https://patreon.com/SEREV3d
Also, we just updated our Jack Skellington folder on Patreon with painted multicolor 3mf files too, you can download those for free as well.

What filament to use for the Jack Skellington Pumpkin? We recommend:
▶Bambu PLA Basic White

OR

▶Bambu PLA Basic Black

Painting recommendation if you use the white filament:
Base Coat: After sanding (optional), leave the filament as is for a base color or lightly prime it with a translucent coat.
Shading: Use black and brown acrylic paints for dry brushing around the eye sockets, mouth, and crevices to enhance depth.
Sealing: Apply a matte clear coat to maintain a natural, weathered look.

Painting recommendation if you use the black filament:
Lightly sand the 3D print to smooth any rough areas (optional).
White Paint Dabbing: Use a sponge with white acrylic paint. Dab lightly on the surface, focusing on raised areas. This will leave the crevices black for natural shading.
Layering: Gradually build up layers of white by repeating the dabbing, letting each layer dry between coats to control the brightness. Finishing Touch: Seal with a matte clear coat to protect the surface and maintain the organic look.

What kind of lights to use for the lantern?

▶Remote Controlled 16-color RGBW Puck Lights

OR
▶D37.2x36.6mm LED Flame Tea Light Candle Set

We are looking forward to see your makes, feel free to share them in the comments!:)

Join our SEREV 3d Patreon All-access SEREV Member tier for ▶Commercial license and access to 50+ awesome 3d printable designs, for ONLY $13