This is the classic cribbage board made better. It is a standard full-size folding crib board with the following improvements…

Square pegs - are stronger and less likely to snap off in the hole Through holes - if a peg does break off you can push it through to clear the hole (no more blocked peg holes) 3D printed - you can make more pegs any time Peg storage - that is visible and organized so you can see your pegs at all times More pegs - You need 3 pegs to play and count games but this board stores 4 so you always have a spare

non-AMS version included - colour the tracks with coloured markers.

And, for those who love crib I want to share with you the way we sometimes play which we call "19's". Since scoring 19 in crib is impossible, we give 19 points when a player gets zero in their hand (or crib). This added twist changes the game dynamics in a really fun way so that a new player or someone getting a run of bad cards can still be competitive. Very fun! Give it a try if you have not played like that before.

I have attached the crib rules with the optional "19's" rule included.

100% printed - no hardware, fasteners, or adhesives required. No support is required.

Print Settings:

Material = PLA or PETG (any material should work) Nozzle = 0.4mm Layer height = 0.2mm Line width = 0.4mm Wall count = minimum 2 (0.8mm) Top and Bottom Layer Count = minimum 3 Infill = 15%, 100% for the pegs Ironing = Not required Brim = No Support = No

Commercial Licensing is available through my logicalplanet Memberships here on Thangs. I will customize and provide commercial support to members on request.

See my blog for more details and other product info… https://www.logicalplanet.com/