Paul B

Square Peg Cribbage (Crib Board)

by
logicalplanet
Follow
Follow
Remix Model
logicalplanet
logicalplanet
|
Image 1 of 8
Square Peg Cribbage (Crib Board) 3d model
logicalplanet
logicalplanet
|
Image 1 of 8
Square Peg Cribbage (Crib Board) 3d model
2D
3D
Makes
Square Peg Cribbage (Crib Board) 3d model
Square Peg Cribbage (Crib Board) 3d model
Square Peg Cribbage (Crib Board) 3d model
Square Peg Cribbage (Crib Board) 3d model
Square Peg Cribbage (Crib Board) 3d model
Square Peg Cribbage (Crib Board) 3d model
Square Peg Cribbage (Crib Board) 3d model
Square Peg Cribbage (Crib Board) 3d model
This model is restricted by licensing terms. 

This is the classic cribbage board made better. It is a standard full-size folding crib board with the following improvements…

Square pegs - are stronger and less likely to snap off in the hole Through holes - if a peg does break off you can push it through to clear the hole (no more blocked peg holes) 3D printed - you can make more pegs any time Peg storage - that is visible and organized so you can see your pegs at all times More pegs - You need 3 pegs to play and count games but this board stores 4 so you always have a spare

non-AMS version included - colour the tracks with coloured markers.

And, for those who love crib I want to share with you the way we sometimes play which we call "19's". Since scoring 19 in crib is impossible, we give 19 points when a player gets zero in their hand (or crib). This added twist changes the game dynamics in a really fun way so that a new player or someone getting a run of bad cards can still be competitive. Very fun! Give it a try if you have not played like that before.

I have attached the crib rules with the optional "19's" rule included.

100% printed - no hardware, fasteners, or adhesives required. No support is required.

Print Settings:

Material = PLA or PETG (any material should work) Nozzle = 0.4mm Layer height = 0.2mm Line width = 0.4mm Wall count = minimum 2 (0.8mm) Top and Bottom Layer Count = minimum 3 Infill = 15%, 100% for the pegs Ironing = Not required Brim = No Support = No

Commercial Licensing is available through my logicalplanet Memberships here on Thangs. I will customize and provide commercial support to members on request.

See my blog for more details and other product info… https://www.logicalplanet.com/


23 Likes50 DownloadsNovember 1, 2024


23 Likes50 DownloadsNovember 1, 2024
This model is restricted by licensing terms.