Free for a limited time.
This is a derivative of my newest design version 2.1 of this knife (https://than.gs/m/1092890) which now has improved geometry to help keep the blade closed and or opened as well as a detent on the closed side to minimize the chances of it partially opening in your pocket.
This folding scalpel handle is extra long (XL) designed specifically for the #60 blade. I had several requests for this knife handle and it was not practical to incorporate it into my original design so here it is…
Safer (detent and new geometry), stronger and stiffer and can accommodate the very long #60 scalpel blades (up to 71mm in total length).
The pivot utilizes my offset radii design allowing it to print easily and still rotate tight in the open and closed positions.
Check it out!
100% printed - no hardware, fasteners, or adhesives required. No support required
Print Settings:
I have tested this design on multiple printers using PETG, ABS+ and PLA. Print settings can vary significantly between users so please note my settings and let me know if you are having difficulty. I am committed to helping everyone get great print results to the extent I can so please contact me if you are having issues.
Nozzle = 0.4mm Layer height = 0.2mm Line width = 0.4mm Wall count = 4 (1.6mm) Infill = 40% Ironing = ON
Commercial Licensing is available through my Thangs Memberships.
I welcome requests, suggestions and ideas to help make this and all my products better. Please send me a message any time.
I also have the original version of this knife for smaller #4 handle scalpel blades. https://than.gs/m/1092890
See my blog for more details at… https://www.logicalplanet.com/