tracking pixel
jdegs

Divided Gridfinity Boxes (CadQuery Customizable)

by
jdegs
Follow
Follow
Remix Model
jdegs
jdegs
Image 1 of 4
Divided Gridfinity Boxes (CadQuery Customizable) 3d model
2D
3D
Makes
Divided Gridfinity Boxes (CadQuery Customizable) 3d model
Divided Gridfinity Boxes (CadQuery Customizable) 3d model
Divided Gridfinity Boxes (CadQuery Customizable) - Divided Gridfinity container, 2x2x4-hi and 1x1-divs - 3d model
Divided Gridfinity Boxes (CadQuery Customizable) 3d model
This model is restricted by licensing terms. 
119 Likes749 DownloadsApril 29, 2022
This model is restricted by licensing terms. 


This is a from-the-ground-up reimplementation of Zack Freedman's divided Gridfinity boxes using CadQuery instead of Fusion 360. See this video for further information about the project:

https://www.youtube.com/watch?v=ra_9zU-mnl8

This version is customizable in CadQuery so you can generate custom sized divided boxes, including ridiculously large ones like 10x10 boxes etc. I have included a random selection of grid sizes from 1x1x2-high up. These should be fully compatible with the official boxes/grids. You can also fully customize the X Y and Z unit sizes AND the number of dividers on X and Y separately!

I re-implemented this because it seems like a perfect fit for an open source CAD software like CadQuery. With that in mind I have also released the source code python script that was used to generate the STLs. I would love for others to help me create new organizer bins and/or re-implement organizer bins in open source CAD software like CadQuery or OpenSCAD.

I used CadQuery/CQ-Editor to design this with a recent version checked out from github on April 13th, 2022. Unfortunately CadHub.xyz does not have a recent enough version of CadQuery to render this properly (n.b. the issue is with lack of a combine argument in the older version of the eachpoint method).

CQ-Editor is available from here, but please check out a 0.30dev version or newer to be able to compile the included CadQuery source code: https://github.com/CadQuery/CQ-editor

f you are interested also check out all of my gridfinity models for baseplates and boxes here: https://www.printables.com/social/107343-jdegs/collections/154274

And my related model for undivided gridfinity boxes here: https://www.printables.com/model/174715-basic-undivided-gridfinity-boxes-cadquery-customiz

Source Code is available here since Thangs doesn't allow CadQuery python files: https://www.printables.com/model/179040-divided-gridfinity-boxes-cadquery-customizable

REVISION HISTORY:

220427: Revision #1

  • Fixed issue where the bottom thickness of the box was only 1.0mm above the top of the magnet/bolt holes, but was intended to be 2.0mm. Re-rendered all models and released revised python source code.

119 Likes749 DownloadsApril 29, 2022




This model is restricted by licensing terms. 
119 Likes749 DownloadsApril 29, 2022
This model is restricted by licensing terms.