Happy Pumpkin

A happy little pumpkin. 🎃 You can use it as not-so-spooky lamp with a LED lea light or simply as decoration or storage. The design is based on a 3d scan of a real pumpkin. The cut in the center is intentionally designed so that the parts only fit in one way – to make the stacking easy. The eye and mouth cut-outs can be inserted back into the pumpkin.

Instructions

• Print all parts
• Glue the stems into the top parts.
• Enjoy!

Print settings Required build volume: 130 x 130 x 150 m Material usage: 160 g

Material: PLA Print direction: stls are rotated correctly, check images Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none Support: Only the body needs support for the mouth. Tree support with a 30 degree “threshold angle”. (in Cura the number is calculated 90-30 – so put 60 in “Support overhang angle”)

#halloween