Instructions
Filament ⢠0.2mm
A happy little pumpkin. ð You can use it as not-so-spooky lamp with a LED lea light or simply as decoration or storage. The design is based on a 3d scan of a real pumpkin. The cut in the center is intentionally designed so that the parts only fit in one way â to make the stacking easy. The eye and mouth cut-outs can be inserted back into the pumpkin.
Instructions Print all parts Glue the stems into the top parts. Enjoy!
Print settings Required build volume: 130 x 130 x 150 m Material usage: 160 g
Material: PLA Print direction: stls are rotated correctly, check images Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 3 Infill: 15% Build plate adhesion type: none Support: Only the body needs support for the mouth. Tree support with a 30 degree âthreshold angleâ. (in Cura the number is calculated 90-30 â so put 60 in âSupport overhang angleâ)
#halloween