Trailhead Bike Handlebar Rest - Suction Cup Handlebar Rest

This part sticks to the side of any vehicle via a suction cup. The end of bike handlebars can then be placed into the rest, providing more stability than just leaning the bike against the vehicle itself. It's very handy at trailheads before hitting the trail and after getting back to the parking lot.

Vehicle fitment: This is not a vehicle-specific part. It is meant to attach via suction cup to any vehicle.

Special considerations: None.

Recommended hardware to sell with printed part:

• A suction cup.

The part is designed to work with suction cups that have a built in stud. Here are two versions that I have used in the past:

• This one uses Version 1 of the model (file ending in "Version_1_0.53.step") https://www.amazon.com/gp/product/B0B2KKDZ26
• This one uses Version 2 of the model (file ending in "Version_2_0.685.step") https://www.amazon.com/gp/product/B083RDBFG1

Recommended print settings:

• This is a pretty easy one to make and should be straightforward.
• Most of the common materials are probably fine for this part: PLA, PETG, ABS

Installation details to know: It sticks to the car/truck with the suction cup. Usually the suction cups have an easy way (such as a small tab) to remove the suction cup as well.

Photos: Included when you download the print file for this model is a zip file with photos. You are welcome to modify and/or use these images in your listings.