Introducing the FDM (Fixum Dude Motors) print in place Jeep. 

Prints without supports. Samples are printed in PLA with 0.2 layer height, at least 3 perimeters, and 10%-15% gyroid infill. Examples printed in PolyMaker Silk Chrome PLA, Eryone Dual Color Blue/Green Silk PLA and an unknown gold silk PLA.

Fixum Dude Motors PIP Jeep 

New Ferrari F1 Model
Like and Share this Design 

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND


Ferrari F1-75

Ferrari F1-75.x_t

Lamborghini Reventon

New McLaren MCL36 Model
Like and Share this Design

Give me your valuable Feedback

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND



 McLaren MCL36

McLaren MCL36.x_t

DJI_Mavic_3.stl

Porsche logo

Porsche logo.STEP

2012 Camaro ZL1 With moving axils and wheels

Camaro With Moving Wheels

VW Logo

VW logo.STEP

Porsche

Low Poly 80s Ford Style Stepside Pickup Truck designed for Loyal Moses's BMR 2021 Christmas Community Print Drive to help print and ship free gifts to families and children all over the world this Christmas season.

Prints on its side without supports.  Model in the photos was printed in AIORobotics Red PLA on a Monoprice Select Mini at 0.2 Layer Height and 10% infill. 

 Low Poly 80s Ford Style Stepside Pickup Truck

Mercedes benz logo.STL

A cleaned up version and revisited version of the Urus, in solid model format.
A so called "Tombino".

Lamborghini Urus

A cleaned up and bit more modern version of the Urus, a so called "Tombino".

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3931711.

Remixed muzz64's Tire Valve Cap. I removed the MakerBot logo, added a dome top, reduced the size a little from 10.5mmX10.5mmX15mm to 10mmX10mmX14.3mm. The cap can fit a standard [o-ring](https://www.alltiresupply.com/products/replacement-o-rings-for-tpms-valve-caps?variant=16347426949) if you're missing it, or you can try printing the one I whipped up.

**Printing the Tire Valve Cap**

I recommend printing the Tire Valve Cap at **.1mm layer height**, either **2 shells at 100% infill** with or **4 shells** which should make it solid. I've had no issues so far with **PLA**, but you may want to go with a sturdier material like **ABS or PETG**. I have completed a vacation driving 250+ miles both ways without issue. I was using the actual o-ring from the previous cap that had cracked.

**Printing the O-Ring**

I have not tested the O-Ring as thoroughly, but if you decide to print it I recommend printing the O-Ring in **TPU/TPE at .1mm layer height with 2 shells at 100% infill**. It's a little thicker than a normal one which should help with stems being pressed in and releasing air.

When inserting the printed O-Ring into the cap, place it so that the first layer/bottom is facing outward as you place it in the cap. You can then either push it in using a pen or other small tool, or screw the cap on which should force the O-Ring into the cap.

Tire Valve Cap and TPMS O-Ring

Easy to print and fun boat for the bathtub. 1:25 scale. The model is inspired by a Whaly 310. This model can be printed without supports but some supports in the fore will improve the bridging (see photo). The parts needs to be glued together. Add a thin string through the ropeholders for extra details. The prints in the photos was printed on a Prusa Mini+ using Fiberlogy FiberSatin with 0.2mm layer height
Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No raft
Supports not required but recommended
0,2mm layer height

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial

1:25 scale boat for the Bathtub

not-printable.stl

Simple, yet functional rd1 cupholder. This model is still in test form, print and comment with issues or improvement. 

NOT FOR RESALE.

 

RD1 CRV Cupholder v1

rd1_cupholder.stl

Harley-Davidson Box

Harley-Davidson Box Top.stl

This is a Mercedes Benz Logo because my [Opel Logo](https://cults3d.com/en/3d-model/gadget/opel-logo-magnustor3d) is being quite bit popular here then I decided to create more car [logos](https://cults3d.com/en/design-collections/Frikarte3D/decorations) to print. 

You can find a keychain with same logo here: [Keychains Pack](https://cults3d.com/en/design-collections/Frikarte3D/keychains)

Any comment or suggestion is welcome!

Autos & Vehicles

Most Popular of All Time

Categories

Popular

Personalize

Trending