I've been cleaning my workspace and had a lot of DJEEP 1 lighters in a drawer. Made a simple base for the lighters to keep it organized. Designed several different layouts
1x4, 1x6, 1x8, 1x10, 2x4, 2x6, 2x8, 2x10

Subscribe or follow me on:
Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Lighter Base - DJEEP 1

lighter_holder_2x6.stl

Projectvideo:
https://youtu.be/IWbeTUQQgZ4


Hinged Calibration Cube:
https://social.thangs.com/m/24764
Accessories 01:
https://social.thangs.com/m/24868
Accessories 02:
https://social.thangs.com/m/54614



I made this Hinged Calibration Cube to easily test and tweak my slicer settings for articulated and print-in-place designs

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No raft
No supports
0,1-0,2mm layer height

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.
This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Hinged Calibration Cube Accessories 02

not-printable.stl

IDEX/Multimaterial version. 
Single extruder version: https://social.thangs.com/m/27413
Stand: https://social.thangs.com/m/18530

Print-in-place and articulated Jet Fighter for IDEX or Multimaterial 3d printers. The body with camopattern (color_01 and color_02) was printed as one part on a FlashForge Creator Pro 2 IDEX while the canopy (canopy_separate) was printed separately and glued in place. If you have more than two colors you will be able to add the canopy (color_03) as a part of the multimaterial print. The wingtips has integrated supports and snaps of: https://youtube.com/shorts/SNWnS3XnjX8

Subscribe or follow me on:
Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
IDEX 3d printer or Multimaterial
No support
No raft
0,15mm-0,2mm layer height
35-45mm/s

 *The print in the photo was printed slightly upscaled 

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Print-in-place and articulated F14 with Camo - IDEX

color_01.stl

Projectvideo:
https://youtu.be/LhLI4s-e-RQ

My 5yr old asked me if I could make him a ring he could use with his LEGO bricks, so I designed him this Brickring. I also made it available in various sizes from 15-21mm

Subscribe or follow me on:

YouTube: www.youtube.com/user/agepbiz

Instagram: www.instagram.com/agepbiz

Twitter: www.twitter.com/agepbiz


The "brickring_support" files do have built in support, slice these with support settings set to OFF

LEGO is a trademark of the LEGO Group, which does not sponsor, authorize or endorse this project

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Brickring

brickring_15mm.stl

Projectvideo:
https://youtu.be/Cu7UQ7OPZC8

Sock Puppet Accessories. Attached with magnets Ø5x3mm
Teeth was printed using dual color on a IDEX 3d printer

Subscribe or follow me on:

Instagram: 
www.instagram.com/agepbiz
YouTube: 
www.youtube.com/user/agepbiz
Twitter: 
www.twitter.com/agepbiz

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

edit 21.12.21 - added missing file

Sock Puppet Shark Accessories

Projectvideo:
https://youtu.be/Cu7UQ7OPZC8

Sock Puppet Accessories. Attached with magnets Ø5x3mm
Teeth was printed using dual color on a IDEX 3d printer

Subscribe or follow me on:

Instagram: 
www.instagram.com/agepbiz
YouTube: 
www.youtube.com/user/agepbiz
Twitter: 
www.twitter.com/agepbiz

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

sharkfin.stl

frame.stl

I needed a simple Towel Hook, so I designed and printed one. The hook is attached using double sided tape

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No support
No raft
0,1mm-0,2mm layer height

Towel Hook

towel_hook_01.stl

Recently bought a Xiaomi Vacuum Cleaner Mini and decided to design and print a simple but clean looking wall mount for it

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No support
No raft
0,15mm-0,2mm layer height

Wall Mount - Xiaomi Vacuum Cleaner Mini

Projectvideo
https://youtu.be/1gzcMpzTbfI

I wanted to make some halloween decoration using flexible filament (TPU) so I made this little fella in a speed 3d modeling session. I hope you enjoy this small project

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Black Widow Spider

Projectvideo
https://youtu.be/1gzcMpzTbfI

wanted to make some halloween decoration using flexible filament (TPU) so I made this little fella in a speed 3d modeling session. I hope you enjoy this small project

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Hand grenade shape lighter case. The case is made to fit a "1 Lighter" produced by DJEEP. Add a keychain ring for extra detail. The handle needs to be pushed in to activate the gas.

Use with care. Lighters are NOT toys
The lighter case is just a decorative piece

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:

No support
No raft
0,10mm-0,2mm layer height

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Lighter Case - Hand Grenade Shaped

lighter_grenade.STL

Projectvideo (F14 Tomcat with breakaway): https://youtu.be/SNWnS3XnjX8

I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real MiG better, while still being print-in-place and articulated. The wingtip breaks of with a satisfying snap and leaves a nice clean edge. I have also adjusted the wing shape

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:

No support
No raft
0,15mm-0,2mm layer height
35-45mm/s

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Print-in-place and articulated MiG-23 Jet Fighter with Improved Wingdesign

mig_200_breakaway_brim.stl

Projectvideo: https://youtu.be/SNWnS3XnjX8

I have been experimenting with a breakaway wingtip to improve on the silhouette of my design to match the real F14 better, while still being print-in-place and articulated. The wingtip breaks of with a satisfying snap and leaves a nice clean edge. I have also adjusted the wing shape and the angle of the tail fins. I have also included a version with a brim

If you want the stand for this model you can download it here:
https://thangs.com/agepbiz/Printinplace-and-articulated-F14-Jet-Fighter-with-Stand-18530

*edit 10.24.21
Added a tiny version (100), keep in mind it is a challenging print and requires a well calibrated printer, good filament and finetuned profile

*edit 10.23.21
Added articulated eggs for this version of the Jet Fighter

*edit 10.07.21
added a larger version (300). If you want to print the stands for it you have to upscale the stands to 150%

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:

No support
No raft
0,15mm-0,2mm layer height
35-45mm/s

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Print-in-place and articulated F14 Jet Fighter with Improved Wingdesign

jet_fighter_200_breakaway_smooth.stl

jet_fighter_200_base_v2.stl

jet_fighter_200_base_short_v2.stl

jet_fighter_300_breakaway_smooth_brim.stl

egg_200_breakaway_smooth.stl

egg_300_breakaway_smooth.stl

egg_100_breakaway_smooth.stl

jet_fighter_100_breakaway_smooth_brim.stl

Projectvideo:
https://youtu.be/IWbeTUQQgZ4

Hinged Calibration Cube:
https://social.thangs.com/m/24764
Accessories 01:
https://social.thangs.com/m/24868
Accessories 02:
https://social.thangs.com/m/54614


I made this Hinged Calibration Cube to easily test and tweak my slicer settings for articulated and print-in-place designs

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

*edit 09.20.21
oriented and updated the tongue to print without supports

Printsettings:
No raft
No supports
0,1-0,2mm layer height

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.
This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Hinged Calibration Cube Accessories 01

agepbiz_cube_tounge.stl

not_printable.stl

Projectvideo:
https://youtu.be/IWbeTUQQgZ4

I made this Hinged Calibration Cube to easily test and tweak my slicer settings for articulated and print-in-place designs

Download the teeth accessories for the cube here:
Accessories 01:
https://social.thangs.com/m/24868
Accessories 02:
https://social.thangs.com/m/54614

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No raft
No support structure
0.1-0.2mm layer height

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Hinged Calibration Cube

I made this Hinged Calibration Cube to easily test and tweak my slicer settings for articulated and print-in-place designs

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No raft
No support structure
0,1-0,2mm layer height

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.
This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

WARNING! This is for SLS (Selective Laser Sintering) printers only. For FDM version: https://thangs.com/agepbiz/Surprise-Egg-4--Tiny-Excavator-16770

This SLS version is made to be printed with the toy inside the egg. Photos are from Formlabs Fuse 1 prints

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

SLS Edition #4 - Surprise Egg - Tiny Excavator

SLS Edition - Surprise Egg #4 - Tiny Excavator

WARNING! This is for SLS (Selective Laser Sintering) printers only. For FDM version: https://thangs.com/agepbiz/Surprise-Egg-1--Tiny-Haul-Truck-16594

This SLS version is made to be printed with the toy inside the egg. Photos are from Formlabs Fuse 1 prints

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license


SLS Edition #1 - Surprise Egg - Tiny Haul Truck

SLS Edition - Surprise Egg #1 - Tiny Haul Truck

Projectvideo: https://youtu.be/5S-vbBl7uBc

I made this simple model just for fun to test the IDEX on the Flashforge Creator Pro 2. IDEX is Independent Dual Extruders and means it can print using Mirror Mode, Duplicate Mode, Dual Filament Printing Mode or Dual Color Printing Mode

https://www.flashforgeshop.com/
Affiliate link:
https://amzn.to/3xBepYe

This project was 3d printed using Fillamentum PLA
https://fillamentum.com/ 

Subscribe or follow me on:
Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Dual Color Poker Chips

chip.stl

Projectvideo: https://youtu.be/hjCWHOE4sb8

This is a modified version of my Surprise Egg #6. Bigger, smoother and with a stand
https://thangs.com/agepbiz/Surprise-Egg-6--Tiny-F14-Jet-Fighter-16772
Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:

No support
No raft
0,1mm-0,2mm layer height
35-45mm/s

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Print-in-place and articulated F14 Jet Fighter with Stand

jet_fighter_200_smooth_hole.stl

Projectvideo: https://youtu.be/p3xlg3gt6Dw


The Pull Copter is assembled using M2x8 Hex Cap screws

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No support structure (Print the ring with "Support only from base")
0,1-0,2mm layer height

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial

Pull Copter Finger Ring - Large

copter_blade_large.stl

Projectvideo: https://youtu.be/CK1U-1Md-bU

I have been having fun playing a lot of Red Dead Redemption 2 lately, so I made a Cattleman Revolver Display Model to honor the game. This is a non functional model made for cosplay or decoration purpose. The Cattleman Revolver from Red Dead Redemtion 2 is based on the Colt Model 1873 Single Action Army Revolver (The Peacemaker)
Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Notes:
Print the parts as oriented
raft and support:
barrel - raft and support,
ejector - support,
frame - support,
gate - none,
grip - support,
grip frame - support,
hammer - none,
pin - raft and support,
plugs - none,
trigger - none

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial

1873 Peacemaker Prop Revolver 

colt_all.stl

Projectvideo: https://www.youtube.com/watch?v=OO5BM0G7YQQ

I have had Asthma my whole life and always have my asthma inhaler near by, so I decided to customize the cap, do something fun with it. I call him Darth Inhaler! I hope you enjoy this silly little project.

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz


Darth Inhaler - Customized Asthma Inhaler - Darth Vader

Projectvideo: https://www.youtube.com/watch?v=OO5BM0G7YQQ

I have had Asthma my whole life and always have my asthma inhaler near by, so I decided to customize the cap, do something fun with it. I call him Darth Inhaler! I hope you enjoy this silly little project.

Subscribe or follow me on:
Instagram: www.instagram.com/agepbiz
YouTube: www.youtube.com/user/agepbiz
Twitter: www.twitter.com/agepbiz


Projectvideo: https://youtu.be/zUH6NLYGv7Q

This is a modified version of my Surprise Egg #13 - Tiny MiG Jet Fighter, but bigger, smoother and with a stand
https://thangs.com/agepbiz/Surprise-Egg-13--Tiny-MiG-Jet-Fighter-16817

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:

No support
No raft
0,1mm-0,2mm layer height
35-45mm/s

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Print-in-place and articulated MiG23 Jet Fighter with Stand

mig_200.stl

Projectvideo: https://youtu.be/OWzTKprKD2g

I wanted to recreate one of the toys from my childhood but design it as a print-in-place model. I made two 3d printable versions where one is completely print-in-place and a version where you can snap-fit some colors onto it.
-no support structures
-0,15mm layer height

I recommend printing the “snakeinplace_testpart.stl” first to make sure your printer can handle the clearance between the articulated parts. PLA wears down over time due to friction so the joints might become loose

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
-no support structures
-0,15mm layer height

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial

snakeinplace - Print-in-place and Articulated Puzzle Toy

-no support structures
-0,15mm layer height


snakeinplace.stl

Projectvideo: https://youtu.be/Ul6tzKezKa0

Pull Copter Finger Ring that was designed to be printed on the tiny Fulcrum Minibot 3d printer with a buildvolume of only 7.5x7x7cm.
The Pull Copter is assembled using M2x8 Hex Cap screws

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No support structure (Print the ring with "Support only from base")
0,2mm layer height

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial

Pull Copter Finger Ring

copter_blade.stl

Projectvideo: https://youtu.be/zUH6NLYGv7Q

3d printable print-in-place and articulated Surprise Egg 

Both the toy and the egg was each designed to be print-in-place without any need for support structures. The toy has variable-sweep wings and the egg is hinged

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No raft
No support structure
0,1mm layer height
30mm/s printspeed
3 perimeters on toy
2 perimeters on egg

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Surprise Egg #13 - Tiny MiG Jet Fighter

print-in-place
No raft
No support structure
0,1mm layer height
30mm/s printspeed
3 perimeters/walls

mig.stl

Projectvideo: https://youtu.be/_3hgx26dY10

3d printable print-in-place and articulated Surprise Egg 

Both the steamroller and the egg was each designed to be print-in-place without any need for support structures. The steamroller has rotatable wheels and roller and articulated steering apparatus. The egg is hinged

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No raft
No support structure
0,1mm layer height
30mm/s printspeed
3 perimeters on toy
2 perimeters on egg

Notes:
If you want to print bigger versions of the steamroller use the file steamroller_large_200.stl for a 200% version and steamroller_large_300.stl for a 300% version

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Surprise Egg #12 - Tiny Steamroller

steamroller.stl

Projectvideo: https://youtu.be/szbpNGrIUOU

3d printable print-in-place and articulated Surprise Egg 

The harvester and the egg was each designed to be printed in place without any need for support structures. The harvester have a swivel arm, rotatable reel, lockable reel arm and rotatable wheels. The egg is hinged.

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No raft
No support structure
0,1mm layer height
30mm/s printspeed
3 perimeters on toy
2 perimeters on egg

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Surprise Egg #11 - Tiny Harvester

harvester.STL

Projectvideo: https://youtu.be/DxNNB9PW3_0

3d printable print-in-place and articulated Surprise Egg 

The racecar and the egg was each designed to be printed in place without any support structures. The racecar do have rotatable wheels. The egg is hinged..

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No raft
No support structure
0,1mm layer height
30mm/s printspeed
3 perimeters on toy
2 perimeters on egg

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Surprise Egg #8 - Tiny Racecar

racecar.STL

Projectvideo: https://youtu.be/hjCWHOE4sb8

3d printable print-in-place and articulated Surprise Egg 

The cars and the egg was each designed to be printed in place without any support structures. The Car Carrier do have articulated ramps. The egg is hinged.

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No raft
No support structure
0,1mm layer height
30mm/s printspeed
3 perimeters on toy
2 perimeters on egg

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Surprise Egg #7 - Tiny Car Carrier

car_carrier_truck.STL

Projectvideo: https://youtu.be/hjCWHOE4sb8

3d printable print-in-place and articulated Surprise Egg 

Both the jet fighter and the egg was each designed to be printed in place without any support structures. The jet fighter have variable-sweep wings. The egg is hinged.

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No raft
No support structure
0,1mm layer height
30mm/s printspeed
3 perimeters on toy
2 perimeters on egg

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Surprise Egg #6 - Tiny F14 Jet Fighter

jet_fighter.STL

Projectvideo: https://youtu.be/LYwZcH8kKiw

3d printable print-in-place and articulated Surprise Egg 

Both the fire truck and the egg was each designed to be printed in place without any support structures. The fire truck has three pairs of rotatable wheels, liftable and rotatable ladder. The egg is hinged

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No raft
No support structure
0,1mm layer height
30mm/s printspeed
3 perimeters on toy
2 perimeters on egg

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Surprise Egg #5 - Tiny Fire Truck

fire_truck.STL

Projectvideo: https://youtu.be/izAVVtEN4ik

3d printable print-in-place and articulated Surprise Egg 

Both the excavator and the egg was each designed to be printed in place without any support structures. The excavator has rotatable wheels, liftable arm and articulated bucket and rotatable body. The egg is hinged

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No raft
No support structure
0,1mm layer height
30mm/s printspeed
3 perimeters on toy
2 perimeters on egg

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Surprise Egg #4 - Tiny Excavator

excavator.STL

Projectvideo: https://www.youtube.com/watch?v=GpIibEY4ZKY

3d printable print-in-place and articulated Surprise Egg 

Both the loader and the egg was each designed to be printed in place without any support structures. The loader has rotatable wheels, liftable loader and articulated steering apparatus and the cabin has a snap-fit center position. The egg is hinged

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No raft
No support structure
0,1mm layer height
30mm/s printspeed
3 perimeters on toy
2 perimeters on egg
Notes:
If you want to print bigger versions of the wheel loader use the file loader_200.stl for a 200% version and loader_300.stl for a 300% version. Printspeed 30mm/s

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Surprise Egg #3 V2 - Tiny Wheel Loader

loader_v2_100.stl

Projectvideo: https://www.youtube.com/watch?v=n72DtZDfMU0

3d printable print-in-place and articulated Surprise Egg 

Both the fork lift and the egg was each designed to be printed in place without any support structures. The fork lift has rotatable wheels and a liftable fork. The egg is hinged

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No raft
No support structure
0,1mm layer height
30mm/s printspeed
3 perimeters on toy
2 perimeters on egg

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Surprise Egg #2 - Tiny Fork Lift

fork_lift.STL

Projectvideo: https://www.youtube.com/watch?v=baKauAFH-lI

3d printable print-in-place and articulated Surprise Egg 

Both the truck and the egg was each designed to be printed as print-in-place objects without any support structures. The truck has rotatable wheels and a tiltable bed. The egg is hinged

Subscribe or follow me on:

Instagram: https://www.instagram.com/agepbiz/
YouTube: https://www.youtube.com/user/agepbiz
Twitter: https://twitter.com/agepbiz

Printsettings:
No raft
No support structure
0,1mm layer height
30mm/s printspeed
3 perimeters on toy
2 perimeters on egg

WARNING: CHOKING HAZARD - Small parts
Not for children under 3 yrs.

This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Surprise Egg #1 - Tiny Haul Truck

truck.STL

Instagram:
https://www.instagram.com/agepbiz/

YouTube:
https://www.youtube.com/user/agepbiz

Twitter:
https://twitter.com/agepbiz

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like