The Annoying Valentines Gift Box, the Valentines spinoff of the original Annoying Gift Box. Once again, there's nothing tricky about this gift box, its just simply...annoying. Remove the 25 bolts to be able to remove the lid, thats about it! There is a secret flat head "screwdriver" hidden underneath the ribbon, or a normal flat head screwdriver can be used.
There are 2 options for the lid; One that accomodates the ribbon on top, and one that is flat with not cutout for the ribbon. I figured it would be a good option for a quicker/cheaper product for anyone selling items, and the ribbon version can be an "upgraded" version.
This gift box actually uses the same exact screws from the Original Annoying Gift Box (all other parts are including ribbon and screwdriver are custom to this design)
Note: To achieve the multicolor lid I just did a simple color swap, you don't need a multicolor machine to make it look like the box in the photos!
3D printing settings These are just the settings I used to test the model, feel free to use whatever settings work best for you. FDM or Resin: FDM Scaling: Can be scaled up, bolts likely won't work well if scaled down. Supports: None Infill/Perimeters: 15% infill + 2 perimeters, 3 perimeters for bolts and screwdriver. Nozzle Size: 0.4 Layer Height: 0.2
No supports are needed for this model, just print the pieces in the orientation that they import in and assemble after printing. You will need:
- 1 container
- 1 lid (2 options: with or without the ribbon)
- 1 ribbon (if using lid that accomodates the ribbon)
- 1 screwdriver
- 25 bolts
The "screwdriver" just snaps into place underneath the ribbon after printing.
I have included a "thread test" file so you can make sure that the bolts are going to fit into your box before you print all of them! Make sure to print the thread test in the orientation that the file imports in.