Vertex: Your Spark of Light
Vertex is a small and versatile LED table lamp, capable of adding a touch of design and ambiance to any setting.
Its sleek and functional design is characterized by a PET-G lampshade that creates a soft, diffused light, perfect for setting a relaxing and welcoming atmosphere. The black internal core provides an elegant and modern contrast, while its compact size (maximum diameter 10 cm, height 14 cm) makes it ideal for any space, from the patio to the bedside table.
Its versatility makes it perfect for creating a romantic atmosphere during a candlelit dinner, illuminating tables in restaurants, bars, and cafés, or as a bedside light for a relaxing read before sleep. The durability of the material also makes it suitable for outdoor use, in patios or gardens.
Vertex is the lamp that lights up your special moments, creating unique and personalized atmospheres.
Recommended materials: The prototype was made with Bambu Lab Translucent PET-G and black PET-G filaments.
Dimensions: Maximum Diameter: 10 cm Height: 14 cm
Features: For LED technology Low energy consumption (For USB Power Supply 5V 1A)
Ideal for: Patios Romantic dinners Lighting for restaurant, bar tables Bedside light Decorative lighting
Thank you for choosing my Vertex - Led Lamp model. This design is engineered for printing with the following materials for printing and assembly: transparent or translucent PET-G - Black PET-G for the lamp's interior - 5V 1A Cob Led Strip - Tested with Dimmable Touch button USB power cord - Superglue Gel - Heat shrink tubing - Soldering iron.
How to print and assemble: For the lampshade, use a colored or transparent translucent PET-G, 0.4 nozzle, 0.2 layers, enable thin wall detection, 2 wall loops, 0% infill, enable normal supports, from the build plate only, 40° overhang threshold, remove protrusions. For the internal core and the top cover, use the same settings described above, disable supports. Do not use a brim in either case. To improve bed adhesion, use hairspray and level the bed properly. For assembly, thread the power cable through the hole at the base of the internal core, insert a piece of heat shrink tubing onto the end of the cable, solder the led strip to the cable, pull the cable back through the core hole and fix it using the adhesive side of the led strip, spiraling up, the led strip along the length of the core. Fix the two ends of the strip with a drop of superglue. Apply some superglue around the base of the core and insert it into the lamp, ensuring the notch at the base of the lamp aligns with the power cord. Apply some superglue on the outer wall of the top cover and secure it on top of the lamp in its housing.