This collection includes the full set of 8 different Japanese Patterned Coasters along with 3 sizes of Coaster Caddy (4, 6, and 8 coaster versions with & without a 9th pattern).

Caddy Dimensions:
4 coasters: ∅96.4mm x 26mm (~3.8 x 1 in)
6 coasters: ∅96.4mm x 36mm (~3.8 x 1.4in)
8 coasters: ∅96.4mm x 46mm (~3.8 x 1.8in)

Coaster Dimensions:   ∅92mm x 5 mm thick (~3.6 x .2 in)

___
**Asanoha / Hemp Leaf**
The Asanoha pattern is a traditional Japanese design that geometrically abstracts a hemp leaf. It is based on regular hexagons and is often referred to as “麻の葉” (asa no ha), meaning “hemp leaf” in Japanese. Hemp is known for vitality and vigorous growth without the need for a lot of care. The pattern is believed to have protective qualities, warding off harm or evil spirits. For these reasons, it's often used on clothing - particularly for babies and children - to wish them a strong and healthy growth.
___
**Bishamon Kikkō / Bishamon Tortoise**
The Bishamon Kikko pattern is a traditional Japanese design inspired by the armor of Bishamonten, a Buddhist deity also known as Vaiśravaṇa. The pattern features a hexagonal motif resembling the carapace of a tortoise, which symbolizes longevity. This design is believed to bring good fortune and protection.
___
**Ichimatsu / Checkered**
While it has been a common woven pattern since ancient times, it became known as Ichimatsu in the 18th century as the kabuki actor Sanogawa Ichimatsu liked to use it on his costume hakama. It is presently very popular as the haori worn by Kamado Tanjirō, the main character in the manga/anime Demon Slayer: Kimetsu no Yaiba, featuring this pattern in green and black. It was also used in the logos for the 2020 Tokyo Olympic and Paralympic Games.
___
**Kagome / Basketweave**
The Kagome pattern is a traditional Japanese design element inspired by the symmetrical pattern of interlaced triangles found in Kagome baskets. These baskets, characterized by corner-sharing triangles that form hexagons, have been woven in Japan for centuries.  This pattern is said to protect from demons and bad luck!
___
**Kikkō Hanabishi / Tortoise Flower**
This is an auspicious pattern derived from the shape of the tortoiseshell (hexagons), which represents longevity. Simple tessellation of hexagons leads to a wide number of variations of kikkō, including kikkō hanabishi, where the center of the hexagons form flowers.
___
**Kiku / Chrysanthemum**
Chrysanthemum are Autumnal patterns in Japan and represent longevity and rejuvenation. They originated in China and were introduced into Japan during the Nara period (710-793). The Chrysanthemum eventually became the [Imperial Seal of Japan](https://en.wikipedia.org/wiki/Imperial_Seal_of_Japan) for official documents such as passports.
___
**Seigaiha / Wave**
This pattern represents fan-shaped waves of the open sea. The name originates from the gagaku ancient court dance called seigaiha, in which the dancers wear costumes with this pattern. There is a scene in [The Tale of Genji](https://www.nippon.com/en/views/b09001/) where Genji dances the seigaiha.
___
**Shippo / Seven Treasures**
The Shippo pattern is a traditional Japanese design consisting of interconnected circles. This pattern has a rich cultural significance, symbolizing harmony, peace, and the seven treasures of Buddhism. This pattern is regarded as auspicious for the prosperity of descendants, good relationships, and for bringing harmony.
___
**Uroko / Scales**
The Uroko pattern is a traditional Japanese design composed of triangles meeting at their vertices, creating new triangles between them, resembling snake or fish scales. Scales symbolize youth and rebirth, as new scales grow beneath the old ones. Samurai would also wear clothing with the pattern as a talisman to protect themselves from harm.
___

**PRINTING**:
- For best results, print one at a time or "by object" instead of "by layer"
- Clean your build plate! "Flat" models like this are more likely to shrink and peel up. 
- Print from either side. I prefer design face down on a nice textured plate like the cryo plate
- Print with at least 5 bottom & top shell layers, 2-3 walls, 0-20% infill
- For fuzzy outer rim (using 3mf file):
  - make sure to set fuzzy > countour/outside walls @ ~0.1mm point distance & thickness
  - set modifier > fuzzy > none (necessary to avoid entire pattern printed with fuzzy skin)

___
‼️ ALL SUNA PRINTS designs are protected by Copyright Law. Purchasing files DOES NOT PERMIT you to sell/redistribute any digital or physical objects for any reason under any circumstances.

To legally sell PRINTED models, an ACTIVE subscription is required through Thangs. See the License (linked on every model page) and Subscription for more details. ‼️

Japanese Pattern Coaster Set

A sturdy drink coaster with a traditional Japanese pattern. Large enough for most drink ware. Patterns are cut 3mm deep to accommodate condensation from drink glasses quite well.

**Dimensions**:   ∅92mm x 5 mm thick (~3.6 x .2 in)

___
**Uroko / Scales**
The Uroko pattern is a traditional Japanese design composed of triangles meeting at their vertices, creating new triangles between them, resembling snake or fish scales. Scales symbolize youth and rebirth, as new scales grow beneath the old ones. Samurai would also wear clothing with the pattern as a talisman to protect themselves from harm.
___


**PRINTING**:
- For best results, print one at a time or "by object" instead of "by layer"
- Clean your build plate! "Flat" models like this are more likely to shrink and peel up. 
- Print from either side. I prefer design face down on a nice textured plate like the cryo plate
- Print with at least 5 bottom & top shell layers, 2-3 walls, 0-20% infill
- For fuzzy outer rim (using 3mf file):
  - make sure to set fuzzy > countour/outside walls @ ~0.1mm point distance & thickness
  - set modifier > fuzzy > none (necessary to avoid entire pattern printed with fuzzy skin)

**See also**: [Coaster Caddies](https://thangs.com/designer/Suna%20Prints/3d-model/Coaster%20Caddy%20-%20Ichimatsu%20%2F%20Checkered-1162644)

**Included in**: [Japanese Pattern Coaster Set](https://thangs.com/designer/Suna%20Prints/collection/Japanese%20Pattern%20Coaster%20Set-86879)

___
‼️ ALL SUNA PRINTS designs are protected by Copyright Law. Purchasing files DOES NOT PERMIT you to sell/redistribute any digital or physical objects for any reason under any circumstances.

To legally sell PRINTED models, an ACTIVE subscription is required through Thangs. See the License (linked on every model page) and Subscription for more details. ‼️

Coaster - Uroko / Scales

coaster_uroko_pattern.stl

A sturdy drink coaster with a traditional Japanese pattern. Large enough for most drink ware. Patterns are cut 3mm deep to accommodate condensation from drink glasses quite well.

**Dimensions**:   ∅92mm x 5 mm thick (~3.6 x .2 in)

___
**Shippo / Seven Treasures**
The Shippo pattern is a traditional Japanese design consisting of interconnected circles. This pattern has a rich cultural significance, symbolizing harmony, peace, and the seven treasures of Buddhism. This pattern is regarded as auspicious for the prosperity of descendants, good relationships, and for bringing harmony.
___


**PRINTING**:
- For best results, print one at a time or "by object" instead of "by layer"
- Clean your build plate! "Flat" models like this are more likely to shrink and peel up. 
- Print from either side. I prefer design face down on a nice textured plate like the cryo plate
- Print with at least 5 bottom & top shell layers, 2-3 walls, 0-20% infill
- For fuzzy outer rim (using 3mf file):
  - make sure to set fuzzy > countour/outside walls @ ~0.1mm point distance & thickness
  - set modifier > fuzzy > none (necessary to avoid entire pattern printed with fuzzy skin)

**See also**: [Coaster Caddies](https://thangs.com/designer/Suna%20Prints/3d-model/Coaster%20Caddy%20-%20Ichimatsu%20%2F%20Checkered-1162644)

**Included in**: [Japanese Pattern Coaster Set](https://thangs.com/designer/Suna%20Prints/collection/Japanese%20Pattern%20Coaster%20Set-86879)

___
‼️ ALL SUNA PRINTS designs are protected by Copyright Law. Purchasing files DOES NOT PERMIT you to sell/redistribute any digital or physical objects for any reason under any circumstances.

To legally sell PRINTED models, an ACTIVE subscription is required through Thangs. See the License (linked on every model page) and Subscription for more details. ‼️

Coaster - Shippo / Seven Treasures

coaster_shippo_pattern.stl

A sturdy drink coaster with a traditional Japanese pattern. Large enough for most drink ware. Patterns are cut 3mm deep to accommodate condensation from drink glasses quite well.

**Dimensions**:   ∅92mm x 5 mm thick (~3.6 x .2 in)

___
**Seigaiha / Wave**
This pattern represents fan-shaped waves of the open sea. The name originates from the gagaku ancient court dance called seigaiha, in which the dancers wear costumes with this pattern. There is a scene in [The Tale of Genji](https://www.nippon.com/en/views/b09001/) where Genji dances the seigaiha.
___


**PRINTING**:
- For best results, print one at a time or "by object" instead of "by layer"
- Clean your build plate! "Flat" models like this are more likely to shrink and peel up. 
- Print from either side. I prefer design face down on a nice textured plate like the cryo plate
- Print with at least 5 bottom & top shell layers, 2-3 walls, 0-20% infill
- For fuzzy outer rim (using 3mf file):
  - make sure to set fuzzy > countour/outside walls @ ~0.1mm point distance & thickness
  - set modifier > fuzzy > none (necessary to avoid entire pattern printed with fuzzy skin)

**See also**: [Coaster Caddies](https://thangs.com/designer/Suna%20Prints/3d-model/Coaster%20Caddy%20-%20Ichimatsu%20%2F%20Checkered-1162644)

**Included in**: [Japanese Pattern Coaster Set](https://thangs.com/designer/Suna%20Prints/collection/Japanese%20Pattern%20Coaster%20Set-86879)

___
‼️ ALL SUNA PRINTS designs are protected by Copyright Law. Purchasing files DOES NOT PERMIT you to sell/redistribute any digital or physical objects for any reason under any circumstances.

To legally sell PRINTED models, an ACTIVE subscription is required through Thangs. See the License (linked on every model page) and Subscription for more details. ‼️

Coaster - Seigaiha / Wave

coaster_seigaiha_pattern.stl

A sturdy drink coaster with a traditional Japanese pattern. Large enough for most drink ware. Patterns are cut 3mm deep to accommodate condensation from drink glasses quite well.

**Dimensions**:   ∅92mm x 5 mm thick (~3.6 x .2 in)

___
**Kiku / Chrysanthemum**
Chrysanthemum are Autumnal patterns in Japan and represent longevity and rejuvenation. They originated in China and were introduced into Japan during the Nara period (710-793). The Chrysanthemum eventually became the [Imperial Seal of Japan](https://en.wikipedia.org/wiki/Imperial_Seal_of_Japan) for official documents such as passports.
___


**PRINTING**:
- For best results, print one at a time or "by object" instead of "by layer"
- Clean your build plate! "Flat" models like this are more likely to shrink and peel up. 
- Print from either side. I prefer design face down on a nice textured plate like the cryo plate
- Print with at least 5 bottom & top shell layers, 2-3 walls, 0-20% infill
- For fuzzy outer rim (using 3mf file):
  - make sure to set fuzzy > countour/outside walls @ ~0.1mm point distance & thickness
  - set modifier > fuzzy > none (necessary to avoid entire pattern printed with fuzzy skin)

**See also**: [Coaster Caddies](https://thangs.com/designer/Suna%20Prints/3d-model/Coaster%20Caddy%20-%20Ichimatsu%20%2F%20Checkered-1162644)

**Included in**: [Japanese Pattern Coaster Set](https://thangs.com/designer/Suna%20Prints/collection/Japanese%20Pattern%20Coaster%20Set-86879)

___
‼️ ALL SUNA PRINTS designs are protected by Copyright Law. Purchasing files DOES NOT PERMIT you to sell/redistribute any digital or physical objects for any reason under any circumstances.

To legally sell PRINTED models, an ACTIVE subscription is required through Thangs. See the License (linked on every model page) and Subscription for more details. ‼️

Coaster - Kiku / Chrysanthemum

coaster_kiku_pattern.stl

A nice caddy to hold your [Japanese Pattern Coaster Set](https://thangs.com/designer/Suna%20Prints/collection/Japanese%20Pattern%20Coaster%20Set-86879), also comes with a traditional Japanese pattern on the base! This purchase includes 6 versions of a coaster caddy that holds 4, 6, or 8 coasters, including plain versions without a pattern.

**Caddy Dimensions**:
**4 coasters**: ∅96.4mm x 26mm (~3.8 x 1 in)
**6 coasters**: ∅96.4mm x 36mm (~3.8 x 1.4in)
**8 coasters**: ∅96.4mm x 46mm (~3.8 x 1.8in)

**Coaster Dimensions**:   ∅92mm x 5 mm thick (~3.6 x .2 in)

___
**Ichimatsu / Checkered**
While it has been a common woven pattern since ancient times, it became known as Ichimatsu in the 18th century as the kabuki actor Sanogawa Ichimatsu liked to use it on his costume hakama. It is presently very popular as the haori worn by Kamado Tanjirō, the main character in the manga/anime Demon Slayer: Kimetsu no Yaiba, featuring this pattern in green and black. It was also used in the logos for the 2020 Tokyo Olympic and Paralympic Games.
___


**PRINTING**:
- For best results, print one at a time or "by object" instead of "by layer"
- Clean your build plate! "Flat" models like this are more likely to shrink and peel up. 
- Print with at least 5 bottom & top shell layers, 2-3 walls, 0-20% infill
- For fuzzy outer wall (using 3mf file):
  - make sure to set fuzzy > countour/outside walls @ ~0.1mm point distance & thickness
  - set modifier > fuzzy > none (necessary to avoid entire pattern printed with fuzzy skin)

**Included In**: [Japanese Pattern Coaster Set](https://thangs.com/designer/Suna%20Prints/collection/Japanese%20Pattern%20Coaster%20Set-86879)

___
‼️ ALL SUNA PRINTS designs are protected by Copyright Law. Purchasing files DOES NOT PERMIT you to sell/redistribute any digital or physical objects for any reason under any circumstances.

To legally sell PRINTED models, an ACTIVE subscription is required through Thangs. See the License (linked on every model page) and Subscription for more details. ‼️

Coaster Caddy - Ichimatsu / Checkered

coaster_caddy_4x_ichimatsu.stl

A sturdy drink coaster with a traditional Japanese pattern. Large enough for most drink ware. Patterns are cut 3mm deep to accommodate condensation from drink glasses quite well.

**Dimensions**:   ∅92mm x 5 mm thick (~3.6 x .2 in)

___
**Kikkō Hanabishi / Tortoise Flower**
This is an auspicious pattern derived from the shape of the tortoiseshell (hexagons), which represents longevity. Simple tessellation of hexagons leads to a wide number of variations of kikkō, including kikkō hanabishi, where the center of the hexagons form flowers.
___


**PRINTING**:
- For best results, print one at a time or "by object" instead of "by layer"
- Clean your build plate! "Flat" models like this are more likely to shrink and peel up. 
- Print from either side. I prefer design face down on a nice textured plate like the cryo plate
- Print with at least 5 bottom & top shell layers, 2-3 walls, 0-20% infill
- For fuzzy outer rim (using 3mf file):
  - make sure to set fuzzy > countour/outside walls @ ~0.1mm point distance & thickness
  - set modifier > fuzzy > none (necessary to avoid entire pattern printed with fuzzy skin)

**See also**: [Coaster Caddies](https://thangs.com/designer/Suna%20Prints/3d-model/Coaster%20Caddy%20-%20Ichimatsu%20%2F%20Checkered-1162644)

**Included in**: [Japanese Pattern Coaster Set](https://thangs.com/designer/Suna%20Prints/collection/Japanese%20Pattern%20Coaster%20Set-86879)

___
‼️ ALL SUNA PRINTS designs are protected by Copyright Law. Purchasing files DOES NOT PERMIT you to sell/redistribute any digital or physical objects for any reason under any circumstances.

To legally sell PRINTED models, an ACTIVE subscription is required through Thangs. See the License (linked on every model page) and Subscription for more details. ‼️

Coaster - Kikkō Hanabishi / Tortoise Flower

coaster_kikkō_hanabishi_pattern.stl

A sturdy drink coaster with a traditional Japanese pattern. Large enough for most drink ware. Patterns are cut 3mm deep to accommodate condensation from drink glasses quite well.

**Dimensions**:   ∅92mm x 5 mm thick (~3.6 x .2 in)

___
**Bishamon Kikkō / Bishamon Tortoise**
The Bishamon Kikko pattern is a traditional Japanese design inspired by the armor of Bishamonten, a Buddhist deity also known as Vaiśravaṇa. The pattern features a hexagonal motif resembling the carapace of a tortoise, which symbolizes longevity. This design is believed to bring good fortune and protection.
___


**PRINTING**:
- For best results, print one at a time or "by object" instead of "by layer"
- Clean your build plate! "Flat" models like this are more likely to shrink and peel up. 
- Print from either side. I prefer design face down on a nice textured plate like the cryo plate
- Print with at least 5 bottom & top shell layers, 2-3 walls, 0-20% infill
- For fuzzy outer rim (using 3mf file):
  - make sure to set fuzzy > countour/outside walls @ ~0.1mm point distance & thickness
  - set modifier > fuzzy > none (necessary to avoid entire pattern printed with fuzzy skin)

**See also**: [Coaster Caddies](https://thangs.com/designer/Suna%20Prints/3d-model/Coaster%20Caddy%20-%20Ichimatsu%20%2F%20Checkered-1162644)

**Included in**: [Japanese Pattern Coaster Set](https://thangs.com/designer/Suna%20Prints/collection/Japanese%20Pattern%20Coaster%20Set-86879)

___
‼️ ALL SUNA PRINTS designs are protected by Copyright Law. Purchasing files DOES NOT PERMIT you to sell/redistribute any digital or physical objects for any reason under any circumstances.

To legally sell PRINTED models, an ACTIVE subscription is required through Thangs. See the License (linked on every model page) and Subscription for more details. ‼️

Coaster - Bishamon Kikkō / Bishamon Tortoise

coaster_bishamon_pattern.stl

A sturdy drink coaster with a traditional Japanese pattern. Large enough for most drink ware. Patterns are cut 3mm deep to accommodate condensation from drink glasses quite well.

**Dimensions**:   ∅92mm x 5 mm thick (~3.6 x .2 in)

___
**Asanoha / Hemp Leaf**
The Asanoha pattern is a traditional Japanese design that geometrically abstracts a hemp leaf. It is based on regular hexagons and is often referred to as “麻の葉” (asa no ha), meaning “hemp leaf” in Japanese. Hemp is known for vitality and vigorous growth without the need for a lot of care. The pattern is believed to have protective qualities, warding off harm or evil spirits. For these reasons, it's often used on clothing - particularly for babies and children - to wish them a strong and healthy growth.
___


**PRINTING**:
- For best results, print one at a time or "by object" instead of "by layer"
- Clean your build plate! "Flat" models like this are more likely to shrink and peel up. 
- Print from either side. I prefer design face down on a nice textured plate like the cryo plate
- Print with at least 5 bottom & top shell layers, 2-3 walls, 0-20% infill
- For fuzzy outer rim (using 3mf file):
  - make sure to set fuzzy > countour/outside walls @ ~0.1mm point distance & thickness
  - set modifier > fuzzy > none (necessary to avoid entire pattern printed with fuzzy skin)

**See also**: [Coaster Caddies](https://thangs.com/designer/Suna%20Prints/3d-model/Coaster%20Caddy%20-%20Ichimatsu%20%2F%20Checkered-1162644)

**Included in**: [Japanese Pattern Coaster Set](https://thangs.com/designer/Suna%20Prints/collection/Japanese%20Pattern%20Coaster%20Set-86879)

___
‼️ ALL SUNA PRINTS designs are protected by Copyright Law. Purchasing files DOES NOT PERMIT you to sell/redistribute any digital or physical objects for any reason under any circumstances.

To legally sell PRINTED models, an ACTIVE subscription is required through Thangs. See the License (linked on every model page) and Subscription for more details. ‼️


Coaster - Asanoha / Hemp Leaf

coaster_asanoha_pattern.stl

A sturdy drink coaster with a traditional Japanese pattern. Large enough for most drink ware. Patterns are cut 3mm deep to accommodate condensation from drink glasses quite well.

**Dimensions**:   ∅92mm x 5 mm thick (~3.6 x .2 in)

___
**Kagome / Basketweave**
The Kagome pattern is a traditional Japanese design element inspired by the symmetrical pattern of interlaced triangles found in Kagome baskets. These baskets, characterized by corner-sharing triangles that form hexagons, have been woven in Japan for centuries.  This pattern is said to protect from demons and bad luck!
___


**PRINTING**:
- For best results, print one at a time or "by object" instead of "by layer"
- Clean your build plate! "Flat" models like this are more likely to shrink and peel up. 
- Print from either side. I prefer design face down on a nice textured plate like the cryo plate
- Print with at least 5 bottom & top shell layers, 2-3 walls, 0-20% infill
- For fuzzy outer rim (using 3mf file):
  - make sure to set fuzzy > countour/outside walls @ ~0.1mm point distance & thickness
  - set modifier > fuzzy > none (necessary to avoid entire pattern printed with fuzzy skin)

**See also**: [Coaster Caddies](https://thangs.com/designer/Suna%20Prints/3d-model/Coaster%20Caddy%20-%20Ichimatsu%20%2F%20Checkered-1162644)

**Included in**: [Japanese Pattern Coaster Set](https://thangs.com/designer/Suna%20Prints/collection/Japanese%20Pattern%20Coaster%20Set-86879)

___
‼️ ALL SUNA PRINTS designs are protected by Copyright Law. Purchasing files DOES NOT PERMIT you to sell/redistribute any digital or physical objects for any reason under any circumstances.

To legally sell PRINTED models, an ACTIVE subscription is required through Thangs. See the License (linked on every model page) and Subscription for more details. ‼️

Coaster - Kagome / Basketweave

coaster_kagome_pattern.stl

coaster_kagome_pattern.3mf

🧺  Organizers, Containers, Displays
🔑  Keychains, EDC

___
**Welcome!**
Enjoy the full collection of SUNA high-quality 3D models designed with you in mind. Each model is crafted for easy printing and everyday enjoyment. 

**COMMERCIAL LICENSE AVAILABLE**
Use code **FLEDGLING** to get 40% off commercial licensing, first 40 supporters up to 4 months!

🔜 Discord 🏗️ under construction

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

SUNA

Achievements

Seedling

Explorer