Don't forget to ❤️, add to a collection, and follow SUNA for more fun creations!
This is probably not the first clean/dirty dishwasher magnet you've seen, but it is the coolest! A simple, easy way to keep track of your dishwasher - as long as you remember to flip the sign you will no longer have to guess & inspect dishes to figure out if it was run. There is also a blank sign for you to add your own text! Check the attached YT video to see a quick tutorial on adding negative modifiers like text to a model!
Dimensions: 100 x 60 x 4 mm (~3.9 x 2.4 x .16 in)
Weight: ~19g + 1g waste
Additional Items: You will need 2x Magnets, sized ~20x5x2. You can find them here on amazon. Note that tolerances are loose on these magnets so if one does not fit well just try another from the set. You may also try a little glue if you have any issue with them coming loose.
PRINTING:
- Clean your build plate! "Flat" models like this are more likely to shrink and peel up.
- Print from either side. I prefer design face down on a nice textured plate like the cryo plate
- Print with at least 5 bottom & top shell layers, 2-3 walls, 0-20% infill
- 3mf included with all three designs and a layer change added at z=1.2mm (layer 6 for .2mm layers)
‼️ All models are the exclusive intellectual property of SUNA. SUNA models are protected under applicable copyright laws and international treaties. Unauthorized sharing, distribution, reproduction, or sale of these models in any form is strictly prohibited.
Users are granted limited rights to download and use models for personal, non-commercial purposes only. Any commercial use of these models, including but not limited to selling, modifying for sale, or redistribution, is strictly forbidden unless the user subscribes to a valid Thangs license with Commercial Rights.