Don't forget to ❤️, add to a collection, and follow SUNA for more fun creations!

Kitchen Aid Mixers often have a bare metal rod as a handle for the bowl lifter. This works but it isn't ideal so I designed a sleek cover that is unobtrusive and more enjoyable to use. It swivels as you rotate the arm which improves the overall experience of using the mixer. I also made it about 28mm longer than the little metal rod so there's a bit more to hold onto. The wife gives it two thumbs up, so here's to hoping it will help someone else as well.

Dimensions: 70 x 28 x 14 mm (~2.8 x 1.1 x .6 in)

Printed Weight: ~14g (TPU/TPE)

PRINTING:

• 3mf included to help with print settings
• Print from the only flat side. No supports needed if you have good bridging.
• If you print with flex filament, you can decide how squishy it is with wall count and infill %. I opted for 4 walls and 12% infill so it is very sturdy with a little give.
• Fuzzy skin is nice on a small handle like this (try the 3mf file)

‼️ All models are the exclusive intellectual property of SUNA. SUNA models are protected under applicable copyright laws and international treaties. Unauthorized sharing, distribution, reproduction, or sale of these models in any form is strictly prohibited.

Users are granted limited rights to download and use models for personal, non-commercial purposes only. Any commercial use of these models, including but not limited to selling, modifying for sale, or redistribution, is strictly forbidden unless the user subscribes to a valid Thangs license with Commercial Rights.