Don't forget to like, add models to a collection, and follow SUNA for more fun creations!
This is probably not the first clean/dirty dishwasher magnet you've seen, but it is the coolest! A simple, easy way to keep track of your dishwasher - as long as you remember to flip the sign you will no longer have to guess / inspect to figure out if it was run. There is also a blank sign for you to add your own text! Check the pictures to see a quick tutorial on adding text to the blank sign.
Dimensions: 100 x 60 x 4 mm (~3.9 x 2.4 x .16 in)
Additional Items: You will need 2x Magnets, sized ~20x5x2. You can find them here on amazon. Note that tolerances are loose on these magnets so if one does not fit well just try another from the set.
PRINTING:
- Clean your build plate! "Flat" models like this are more likely to shrink and peel up.
- Print from either side. I prefer design face down on a nice textured plate like the cryo plate
- Print with at least 5 bottom & top shell layers, 2-3 walls, 0-20% infill
- 3mf included with all three designs and a layer change added at z=1.2mm (layer 6 for .2mm layers)
‼️ ALL SUNA PRINTS designs are protected by Copyright Law. Purchasing files DOES NOT PERMIT you to sell/redistribute any digital or physical objects for any reason under any circumstances.
To legally sell PRINTED models, an ACTIVE subscription is required through Thangs. See the License (linked on every model page) and Subscription for more details. ‼️