Tower Maze Level 16 - Built-in locking mechanism

Next addition to the already popular Tower Maze - this time level 16! From this level and all further levels will have a new built in design perk - there is a ONE way path that leads all the way from the top of the maze to the starting point. It enables you to close the maze without the need to solve it - put a gift in the middle, use the single way path to easily close the maze - have the maze solved in the intended way!

This design still requires no supports.

Important: Tower maze case for levels 11 - level 15 is the same as for level 16 so if you have one printed already from previous levels, you don’t need to print an additional one (unless you want to).

Printing specifications:

The maze:

Print Dimensions: Height = 11.7 cm (4.60 Inches) | Diameter of 5.4 cm (2.13 inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 2 hours and 10 Minutes Amount of material required: ~ 16.5 m (49 grams)

Maze case:

Print Dimensions: Height = 11.4 cm (4.49 Inches) | Diameter of 5.4 cm (2.13 inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 2 hours and 24 Minutes Amount of material required: ~ 19.3 m (58 grams)

TOTAL PRINT TIME: 4 Hours and 34 Minutes TOTAL PRINT MATERIAL: ~ 35.8 m (107 grams)