New Years Champagne bottle with shootable cork

Simple Champagne bottle cork shooter. To shoot the cork, all you need to do is just press the button on the bottle neck and it will shoot 5 m to 10m distance depending on the material that you use for printing.

Almost no supports for the whole model. The only part that requires the supports is Spring and they are very easily removable supports.

Print Dimensions: Assembled height = 33 cm (13 Inches) | Diameter = 9 cm (3.54 Inches)

All parts are aligned for printing.

BOTTOM PART

NO SUPPORTS Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 2 hours and 36 Minutes Amount of material required: ~ 34.8 m TOP PART

NO SUPPORTS Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 2 hours and 49 Minutes Amount of material required: ~ 27.3 m TOP PART FOR THE SPRING

NO SUPPORTS Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 1 hours and 11 Minutes Amount of material required: ~ 4.3 m

CORK

NO SUPPORTS Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 1 hours and 10 Minutes Amount of material required: ~ 4.5 m SPRING

supports on the build plate only Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 39 Minutes Amount of material required: ~ 6.2 m

TOTAL PRINT TIME: 8 Hours and 25 Minutes TOTAL PRINT MATERIAL: ~ 77.1 m