Get the lates level - TowerMaze level 26 here: https://than.gs/m/1081461

New batch of Tower Maze's - this time levels 18, 19, and 20! To make it more convenient, there is a ONE way path that leads all the way from the top of the maze to the starting point. It enables you to close the maze without a need to solve it - put a gift in the middle, use the single way path to easily close the maze - have the maze solved in the intended way!

This design still requires no supports.

Important: Tower maze case for levels 11 to 20 are the same so if you have one printed already from previous levels, you don’t need to print an additional one (unless you want to).

Printing specifications:

The maze Level 18:

Print Dimensions: Height = 11.7 cm (4.60 Inches) | Diameter of 5.4 cm (2.13 inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 2 hours and 1 Minutes Amount of material required: ~ 16.1 m (48 grams)

The maze Level 19:

Print Dimensions: Height = 11.7 cm (4.60 Inches) | Diameter of 5.4 cm (2.13 inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 2 hours and 1 Minutes Amount of material required: ~ 16.1 m (48 grams)

The maze Level 20:

Print Dimensions: Height = 11.7 cm (4.60 Inches) | Diameter of 5.4 cm (2.13 inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 2 hours and 1 Minutes Amount of material required: ~ 16.1 m (48 grams)

Maze case:

Print Dimensions: Height = 11.4 cm (4.49 Inches) | Diameter of 5.4 cm (2.13 inches) Layer height: 0.2 mm Infill type: Gyroid Infill percentage: 12% Print speed: 250 mm/s Print time: 2 hours and 16 Minutes Amount of material required: ~ 18.7 m (55.8 grams)

TOTAL PRINT TIME: 12 Hours and 51 Minutes TOTAL PRINT MATERIAL: ~ 104.4 m (311.4 grams)