Print Time for 2-color pattern -Approximately 2 hrs and 28min.** Print time varies  depending on how many colors and sizes

P1P/ P1S Bambu Basic settings (bambu slicer provides the options for different printers to use the .3mf settings)

Aux fan should be at or below  20% or  turned OFF (if using one)
Printing color sequence has been set for Bambu Printers but may need to be switched up if using a different slicer/printer

Settings 
First Layer .20mm
Other layers .16mm
Resolution .01
elephant compensation .18
Ironing is turned on for top  surfaces
Arachne walls
Only one wall on top surfaces set to Topmost Surface
2 wall loops
6 top shell
6 bottom shell 
10 % Gyroid infill
Initial Layer 35mm
Initial Layer Infill 90mm
NO support

Prime tower enabled **suggest it be used especially  on the pattern multi colored print
Brim/Bed Adhesion: None Needed
Flushing set at default  **you will need to adjust this for your filaments and machine type and how dialed in your settings are

Sugar Skull Earrings

Sugar Skull Earrings.3mf

Sir Dragon is 2D layered wall art designed in a mandala-like style and is really the nicest Dragon you will ever meet-
Instead of Slaying the Dragon-Make friends and invite it to hang out on your wall.

File upload includes the .3mf and the layered individual stl files

Can be increased in size using the X and Y (It is recommended that the z height stay at .18 to .20)

Print Time abt 2 hrs 20 min
P1P/ Bambu Basic 
Aux fan is OFF (if using one)
Settings 
First Layer .2mm
Other layers .18mm
Classic walls
2 wall loops
5 top shell
5 bottom shell 
20% Gyroid infill

Prime tower enabled 
Brim/Bed Adhesioin: None Needed
Flushing set for .75 (you will need to adjust this for your filaments and machine type)


Sir Dragon Layered Wall Art

3 Layered Dragon .3mf

A winter's night with you has holiday vibes with a bit or romanticism
A super vibrant print and a great ambient light

P1P/ Bambu Basic PLA in CMYK Colours (Total of 4 colors used) 
THIS IS NOT SET UP TO CREATE WITHOUT AN AMS but i am sure it is possible
Recommended with  Bambu Basic PLA CYMK & Print Profile But I use Often use other filmament (Sunlu PLA+ white, Bambu PLA Magenta, Sunlu PLA+ yellow 
and Sunlu PLA+ light blue)as well
Aux fan is OFF (if using one)

Settings are taken from https://wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions%20
Lithophane created with https://lithophanemaker.com/Color%20Lithophane.html?fbclid=IwAR0zbiYVOGT2kV0MY4LtLbNk5rrg_wOd_bEsA2kpnxebZCTbBNzPyFu8h7g.#processing

I have also attached the file for the frame that fits this  print and the LED source can be found at https://us.store.bambulab.com/products/bambu-cmyk-backlight-board?_pos=2&_sid=92ad4ca60&_ss=r

Lithophane Resolution: 0.3
Colored Resolution: 0.8
Layer Height: 0.1
Width: 144
Maximum Thickness: 2.69
Minimum Thickness: 0.8
Height: 108
X Shift: 0.43
Y Shift: 0.43
Rectangle Scale: 1.0
Crop?: Yes
First Layer Height: 0.15
Filaments for Color Palette: eSun Warm White; Purple/Magenta; HATCHBOX Yellow; AIO Cyan

Winter's Night with You Lithophane

Winter's Night with You.3mf

Shhroooms-LOL (Virtual Trip in AI)

Print Time About 4 hrs 6 min

P1P/ Bambu Basic PLA in CMYK Colours (Total of 4 colors used) 
THIS IS NOT SET UP TO CREATE WITHOUT AN AMS but i am sure it is possible
Recommended with  Bambu Basic PLA CYMK & Print Profile But I use Often use other filament (Sunlu PLA+ white, Bambu PLA Magenta, Sunlu PLA+ yellow 
and Sunlu PLA+ light blue)as well
Aux fan is OFF (if using one)

Settings are taken from https://wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions%20
Lithophane created with https://lithophanemaker.com/Color%20Lithophane.html?fbclid=IwAR0zbiYVOGT2kV0MY4LtLbNk5rrg_wOd_bEsA2kpnxebZCTbBNzPyFu8h7g.#processing

I have also attached the file for the frame that fits this  print and the LED source can be found at https://us.store.bambulab.com/products/bambu-cmyk-backlight-board?_pos=2&_sid=92ad4ca60&_ss=r

0.20 Standard Print Profile
First Layer .1mm
Other layers .15mm
Classic walls
2 wall loops
5 top shell
3 bottom shell 
INFILL: 100% rectilinear
Speed: Slow Down For Overhangs is Turned off (UNCHECKED)
Prime tower enabled 
Brim/Bed Adhesion: None Needed
Flushing set for 1.00 (you will need to adjust this for your filaments and machine type but i often range between .60 and .75)



Shhrooooms * Grin* Lithophane

Shhrooooms-lol_ Lithophane.3mf

Getting into the Holiday Spirit with a bit o' "Grinch" vibe
This lithophane was created with Canva AI and is really a vibrant print

The Frame for this lithograph is also attached to this post  and is
Powered by MakerWorld-Make My Lithophane
(https://makerworld.com/makerlab/makeMyLithophane)

The LED source can be found at https://us.store.bambulab.com/products/bambu-cmyk-backlight-board?_pos=2&_sid=92ad4ca60&_ss=r

Lithophane Resolution: 0.3
Colored Resolution: 0.8
Layer Height: 0.1
Width: 144
Maximum Thickness: 2.69
Minimum Thickness: 0.8
Height: 108
X Shift: 0.5
Y Shift: 0.5
Rectangle Scale: 1.0
Crop?: Yes
First Layer Height: 0.15
Filaments for Color Palette: eSun Warm White; Purple/Magenta; HATCHBOX Yellow; AIO Cyan

Grungie "Grinch" Girl Lithophane

Grunge Grinch Girl Lithophane.3mf

Gill (Moorish Idol) Earrings.

Remember Finding Nemo? Nemo and Dory are always Memorable-but what about Gill?

These are a super simple, easy and QUICK file-an excellent choice to create something from those slim pickins spools (getting ready to run out or just not enough to use for major prints)

The 3MF has THREE different Color sets to get you started -this is also an easy to paint (re-paint model) to make your own exotic color combos. You can either delete or duplicate the files depending on your needs

This piece can be successfully sized up -depending on your need.. Can also be used to create a pendant to make  an earring and pendant set.

Current size can use a 7-8mm/20 gauge jump ring for attaching

Print Time for color pattern -Approximately 2 hrs and 28min -to- 3hrs 6 min for 4 sets(depending on how many colors and sizes)

P1P/ Bambu Basic 
Aux fan should be at or below  20% or  turned OFF (if using one)

Settings 
First Layer .12mm
Other layers .16mm
Ironing is turned on for topmost  surfaces
Arachne walls
2 wall loops
6 top shell
6 bottom shell 
25 % Gyroid infill
Initial Layer 35mm
Initial Layer Infill 90mm
Overhang speed 50, 20 5 and 5 respectively

Prime tower enabled (suggest it be used on the pattern multi colored print)
Brim/Bed Adhesion: None Needed
Flushing set at default  (you will need to adjust this for your filaments and machine type)

"Gill" The Moorish Idol Fish Earrings

Gill_Moorish Idol_Multicolor.3mf

Gecko Simple Dangle earrings.

These are a super simple, easy and QUICK file-an excellent choice to create something from those slim pickins spools (getting ready to run out or just not enough to use for major prints)

The 3MF has two different sets-one is spotted and the other is plain (for those without an AMS who want to do their own manual color changes)

This piece can be successfully sized up -depending on your need.. Can also be used to create a pendant to make  an earring and pendant set.

Current size can use a 6mm/18 gauge jump ring for attaching

Print Time for color pattern - 80 min  & for single color 24 min

P1P/ Bambu Basic 
Aux fan should be at or below  20% or  turned OFF (if using one)

Settings 
First Layer .2mm
Other layers .16mm
Ironing is turned on for topmost  surfaces
Classic walls
3 wall loops
5 top shell
4 bottom shell 
50 % Gyroid infill
Initial Layer 35mm
Initial Layer Infill 90mm

Prime tower enabled (suggest it be used on the pattern multi colored print)
Brim/Bed Adhesion: None Needed
Flushing set at default  (you will need to adjust this for your filaments and machine type)

Gecko Simple Dangle earrings

Gecko Simple Dangle earrings.3mf

Spring Mandala Wall or Table Decor

This Spritely Spring-ful 2D layered art piece can be customized in a multitude of color options to suit your design space

Can be adjusted on X and Y to decrease size (stick with the z  being .20 to .25)

Print Time abt 3 hrs 15 min

P1P/ Bambu Basic 
Aux fan is OFF (if using one)

Settings 
First Layer .2mm
Other layers .16mm
Classic walls
2 wall loops
5 top shell
5 bottom shell 
20% Gyroid infill

Prime tower enabled 
Brim/Bed Adhesioin: None Needed
Flushing set for .75 (you will need to adjust this for your filaments and machine type)


Spring Colorful Layered Mandala

Spring Mandala.3mf

Heart Vase 
Not just a Valentine thing, but you can add a loving heartfelt touch any time of the year.
This holds water  (if a bouquet is what you are planning )  OR  some individual sweets for your "sweets" 

It can be sized slightly up or down depending on the need

Print Time 5 hrs 1 min
Aux fan is OFF (if using one)

Standard PLA Profile for .04 Nozzle UNLESS otherwise stated BELOW:
Elephant Foot comp 0.1
Arachne Walls
3wall loops
5 top shell
5 bottom shell 
20% Gyroid
Infill/wall overlap 20%
No Brim 
Flushing set for .65 (you will need to adjust this for your filaments and machine type)

Powered by Make My Vase from MakerWorld (makerworld.com/makerlab/makeMyVase)

Heart Vase (s)

Heart Vase.3mf

Flutterby Butterfly Layered Wall Art

Can be increased in size using the X and Y (It is recommended that the z height stay at .20 to .23)

Print Time abt 4 hrs 30 min

P1P/ Bambu Basic 
Aux fan is OFF (if using one)

Settings 
First Layer .2mm
Other layers .18mm
Classic walls
2 wall loops
5 top shell
5 bottom shell 
12% Gyroid infill

Prime tower enabled 
Brim/Bed Adhesion: None Needed
Flushing set for .75 (you will need to adjust this for your filaments and machine type)

"Flutterby" Butterfly Mandala Wall Art

Flutterby Mandala .3mf

Chinese Dragon Layered Wall Art

Can be increased in size using the X and Y (It is recommended that the z height stay at .18 to .20)

Print Time abt 3 hrs 27 min

P1P/ Bambu Basic 
Aux fan is OFF (if using one)

Settings 
First Layer .2mm
Other layers .18mm
Classic walls
2 wall loops
5 top shell
5 bottom shell 
12% Gyroid infill

Prime tower enabled 
Brim/Bed Adhesion: None Needed
Flushing set for .75 (you will need to adjust this for your filaments and machine type)


Chinese Dragon Layered Mandala

Chinese Dragon Layered 3 colors.3mf

Crescent Moon  Layered Wall Art

This piece can be successfully sized up or down -depending on your need. Can be used to decorate your wall 
as a desk or end table trivet for glasses. Can also be used to decorate frosted cakes ( must be used post cooking 
and removed before cutting/consuming). This particular piece can be hung in a lighted window to act as "stain glass like art"

Can be increased in size using the X and Y (It is recommended that the z height stay at .20 to .23)

Print Time abt 3hrs 51 min

P1P/ Bambu Basic 
Aux fan should be turned OFF (if using one)

Settings 
First Layer .2mm
Other layers .18mm
Ironing is turned on for top surfaces
Classic walls
2 wall loops
5 top shell
5 bottom shell 
15% Gyroid infill

Prime tower enabled 
Brim/Bed Adhesion: None Needed
Flushing set for .75 (you will need to adjust this for your filaments and machine type)



Cresecent Moon Layered Mandala

Cresecent Moom Layered Mandala.3mf

Leafy Earring design

Have trouble finding just the right color for that super sporty blouse or looking for the right simple but elegant drop for a summer date night???  Well, Look No more.

You can customize the material (this was done in Silk PLA) and / or your color (the example was created with a dual color ). you will only be limited by the color you choose to make (this time*grin*)

These are designed as a DUAL color option (if you have an AMS)

The file has a length (before jewelry findings) of 1.9 in L by .9 in W. Its only about 1/8 of an inch thick and even at 30% infill-SUPER light on your ears This piece can be successfully sized slightly up (do not recommend you go down due to hole for jump ring)

The jump ring gage (how thick the wire that they make the jump ring from) is 18-20 (i used 20 )-the diameter of the ring is up to you (mine were 6mm). As far as the earring part-you can attach to fishook type, post type or even clip earring findings. These can all be found on amazon or crafts stores like Michaels/Hobby Lobby or JoAnns. Even Walmart sells jewelry findings as well


Print Time for a single pair (2 earrings)  is about 30 Min

P1P/ Bambu Basic 
Aux fan should be turned down to around 20 or 30 % (or off)

Settings 
First Layer .16mm
Other layers .16mm
Ironing is turned on for top surfaces
Arachne Walls
2 wall loops
6 top shell
4 bottom shell 
30% Grid
Speed Initial layer lowered to 30 and Initial infill 85

Prime tower enabled
Flush into model /support turned off
Brim/Bed Adhesion: None Needed
Filament flushing set for 1.00  (you will need to adjust this for your filaments and machine type)




Leafy Boho Chic Earrings

Leafy Earring Design.3mf

Boho Chic Earrings

Have trouble finding just the right color for that super sporty blouse or looking for the right simple but elegant drop for a summer date night???  Well, Look No more.

You can customize the material (this was done on an AMS with 2 color PLA) and / or your color . You will only be limited by the color you choose to make (this time*grin*)

These are designed as a DUAL color option (if you have an AMS) but you can erase all painting in the bambu studio and paint them however you would like

The file has a length (before jewelry findings) of 1.5in L by 1.00 in W. Its only about 1/8 of an inch thick and even at 30% infill-SUPER light on your ears This piece can be successfully sized slightly up (do not recommend you go down due to hole for jump ring)

The jump ring gage (how thick the wire that they make the jump ring from) is 18-20 (i used 20 )-the diameter of the ring is up to you (mine were 6mm). As far as the earring part-you can attach to fishook type, post type or even clip earring findings. These can all be found on amazon or crafts stores like Michaels/Hobby Lobby or JoAnns. Even Walmart sells jewelry findings as well


Print Time for a single pair (2 earrings)  is about 67 Min

P1P/ Bambu Basic 
Aux fan should be turned down to around 20 or 30 % (or off)

Settings 
First Layer .16mm
Other layers .16mm
elephant foot compensations .1
Ironing is turned on for top surfaces
Arachne Walls
2 wall loops
6 top shell
4 bottom shell 
30% Grid
Speed Initial layer lowered to 30 and Initial infill 85

Prime tower enabled
Flush into model /support turned off
Brim/Bed Adhesion: None Needed
Filament flushing set for 1.00  (you will need to adjust this for your filaments and machine type)




Boho Chic Earrings

Boho Chic Earrings.3mf

Sea Siren Lithophane

Print time approximately 3.5 hours

This file is a black and white version requiring no color change (AMS not needed)
This prints STANDING and supports are necessary but remove SUPER easily (with hands)

Bambu Frame (for use with the Bambu LED panel) is included in the file

 Created with and Powered by MakerWorld-Make My Lithophane
(https://makerworld.com/makerlab/makeMyLithophane)

Sea Siren Mermaid lithophane

Sea Siren Mermaid lithophane.3mf

Poseidon-Master of the sea Lithophane

Super simple and easy print (print and go)

Print time about 5 hours

This file is a black and white version requiring no color change (AMS not needed)
This prints STANDING and supports are necessary but remove SUPER easily (with hands)

 Bambu Frame (for use with the Bambu LED panel) is included in the file

Created with and Powered by MakerWorld-Make My Lithophane
(https://makerworld.com/makerlab/makeMyLithophane)

Poseidon God of the Sea Lithophane

Makerworld Poseidon Lithophane.3mf

Dolphin Mandala Simple Earrings.

These are a super simple, easy and QUICK file-an excellent choice to create something from those slim pickins spools (getting ready to run out or just not enough to use for major prints)

The 3MF has two different design sets-one is simple star-like/outline and the other is a Mandala Design This piece can be successfully sized up -depending on your need.. Can also be used to create a pendant to make  an earring and pendant set.

Current size can use a 6-8mm/20-18 gauge jump ring for attaching

Print Time for color pattern - about 28 min

P1P/ Bambu Basic 
Aux fan should be at or below  20% or  turned OFF (if using one)

Settings 
First Layer .16mm
Other layers .16mm
Ironing is turned on for top surfaces
Classic walls
2 wall loops
6 top shell
6 bottom shell 
25% Gyroid infill
Infill/wall overlap 20%
Initial Layer 35mm
Initial Layer Infill 90mm
overhang speeds 50/20/5/5

Prime tower enabled (suggest it be used on the pattern multi colored print)
Brim/Bed Adhesion: None Needed
Flushing set at default  (you will need to adjust this for your filaments and machine type)

Dolphin Earring Set (2 Designs)

Dolphin Earring Sets .3mf

This is a Litho of one of the most (In) famous duo in the MCUniverse (well the most famous as his name is FIRST in the title)

This file is the COLORED (not like Blind Al colored) version requiring color change (AMS needed as no pauses have been added so you are SOL unless you make your own print profile). (i used Bambu and Non-Bambu filament for the colors)

This prints laying down (kind of like the man in Yellow and black leotards) and not supports are necessary (only for pansies) FOR THE LITHO -BUT the included Bambu Litho Frame prints standing up (like your mom in the bathroom)but remove SUPER easily (with hands or Adamantium fingernails)

Bambu Frame (for use with the Bambu LED panel) is included in the file uses the

Bambu CMYK Back Light Board (found on the link below for those who can read)
https://us.store.bambulab.com/collections/makers-supply/products/bambu-cmyk-backlight-board

This was suspiciously Created with and most definitely nefariously Powered by MakerWorld-Make My Lithophane
(https://makerworld.com/makerlab/makeMyLithophane)

(and the above questionable remarks are not the views of the poster but rather their cancer ravaged, ugly pug licked faced friend-who we all know and love and whose name it LITERALLY first in the title of the movie)

D And W - The Lithophane

D And W - The Lithophane.3mf

Created to adhere or fasten to structure and hang your headset.
I have multiple headsets and need something wide enough at the base to hold my gaming headsets

U Bracket for headsets

U Bracket for headsets.3mf

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Grainne_Ni_Mhaille-Ladybawlsart

Achievements

Voyager

Novice Maker

Seedling

Up and Coming