Print Time for 2-color pattern -Approximately 2 hrs and 28min.** Print time varies depending on how many colors and sizes

P1P/ P1S Bambu Basic settings (bambu slicer provides the options for different printers to use the .3mf settings)

Aux fan should be at or below 20% or turned OFF (if using one) Printing color sequence has been set for Bambu Printers but may need to be switched up if using a different slicer/printer

Settings First Layer .20mm Other layers .16mm Resolution .01 elephant compensation .18 Ironing is turned on for top surfaces Arachne walls Only one wall on top surfaces set to Topmost Surface 2 wall loops 6 top shell 6 bottom shell 10 % Gyroid infill Initial Layer 35mm Initial Layer Infill 90mm NO support

Prime tower enabled **suggest it be used especially on the pattern multi colored print Brim/Bed Adhesion: None Needed Flushing set at default **you will need to adjust this for your filaments and machine type and how dialed in your settings are