"Flutterby" Butterfly Mandala Wall Art

Flutterby Butterfly Layered Wall Art

Can be increased in size using the X and Y (It is recommended that the z height stay at .20 to .23)

Print Time abt 4 hrs 30 min

P1P/ Bambu Basic Aux fan is OFF (if using one)

Settings First Layer .2mm Other layers .18mm Classic walls 2 wall loops 5 top shell 5 bottom shell 12% Gyroid infill

Prime tower enabled Brim/Bed Adhesion: None Needed Flushing set for .75 (you will need to adjust this for your filaments and machine type)