A winter's night with you has holiday vibes with a bit or romanticism A super vibrant print and a great ambient light
P1P/ Bambu Basic PLA in CMYK Colours (Total of 4 colors used) THIS IS NOT SET UP TO CREATE WITHOUT AN AMS but i am sure it is possible Recommended with Bambu Basic PLA CYMK & Print Profile But I use Often use other filmament (Sunlu PLA+ white, Bambu PLA Magenta, Sunlu PLA+ yellow and Sunlu PLA+ light blue)as well Aux fan is OFF (if using one)
Settings are taken from https://wiki.bambulab.com/en/knowledge-sharing/CMYK-color-lithophane-printing-instructions%20 Lithophane created with https://lithophanemaker.com/Color%20Lithophane.html?fbclid=IwAR0zbiYVOGT2kV0MY4LtLbNk5rrg_wOd_bEsA2kpnxebZCTbBNzPyFu8h7g.#processing
I have also attached the file for the frame that fits this print and the LED source can be found at https://us.store.bambulab.com/products/bambu-cmyk-backlight-board?_pos=2&_sid=92ad4ca60&_ss=r
Lithophane Resolution: 0.3 Colored Resolution: 0.8 Layer Height: 0.1 Width: 144 Maximum Thickness: 2.69 Minimum Thickness: 0.8 Height: 108 X Shift: 0.43 Y Shift: 0.43 Rectangle Scale: 1.0 Crop?: Yes First Layer Height: 0.15 Filaments for Color Palette: eSun Warm White; Purple/Magenta; HATCHBOX Yellow; AIO Cyan