**A print-in-place case for your glasses or sunglasses. ** I used to break my sunglasses several times a year because I just stuffed them into my bag – so I designed a case to protect them. The Design is provided with and without the ornament

Inner dimensions: 154 x 61 x 26 mm If you have bigger glasses – you can scale the thing up

Print settings Required build volume: 170 x 170 x 80 mm Material usage: 120g Print time: 11h

Heat/Material: PLA is what I used. If you live in an Area that becomes very hot in the Summer, it is smart to go for a heat resistant type of filament with a high heat deflection temperature to avoid deformation in the direct sun. There are PLA products that serve this purpose, PETG is also a workable solution. Make sure to go for bright colors and avoid black and other dark filaments since those absorb more heat.

Print direction: stl is rotated correctly, check images Support: none Nozzle size: 0,4 mm Line width: 0,4 mm Layer height 0,2 mm Outer walls: 5 Top/Bottom Layers: 5 Infill: 100% - you can print with less but to ensure maximal stability 100% is recommended. Build plate adhesion type: If your printer or filament tends to warp – please use a brim to avoid layer shift as the result from warping – this will make the hinge unusable