Non Contact Probe Mount [TPU Recommended]

**Non Contact Probe Mount **

Another Practical Print

Made for a probe with a 17.9 - 18mm Dia. I am not 100% Sure if both Capacitive and Inductive Versions share the same geometry but hopefully this is fairly universal

Ridged TPU Recommended but Pla should work too

Recommended Print Settings

Nozzle: 0.4mm Line Width: 0.32mm Layer Height: 0.16mm Walls: 5 Infill: 15-20% Gyroid Pattern Supports: Not required if you print in correct orientation Raft: May be Required If you struggle with bed adhesion

TOLERANCE: May require to shave off some tolerance with "Horizontal compensation" or "X-Y Compensation"

Happy Printing

Discover the best in functional 3D printing with Deanzyne's Non-Contact Probe Mount now available on Thangs.com. Carefully designed for probes with a diameter of 17.9 - 18mm, this model offers universal compatibility, suitable for both capacitive and inductive versions. It's made with durability in mind; the model is recommended to be printed with rigid TPU but can also work with PLA.

Ensure optimal performance with our recommended print settings: use a 0.4mm nozzle, 0.32mm line width, and 0.16mm layer height. With five walls and a 15-20% gyroid pattern infill, this 3D model doesn't require any supports if printed in the correct orientation, although a raft may be necessary if you struggle with bed adhesion.

Keep in mind; you may need to adjust the "Horizontal compensation" or "X-Y Compensation" as you might need to shave off some tolerance. Enjoy a seamless 3D printing experience with our functional model, designed with precision and accuracy. Click on the images provided to explore the high-quality visuals of the model and get ready for a successful print!

Harness the power of 3D printing with thangs.com and happy printing!