SKEP | Pendant Light E27 fast print
SKEP | Pendant Light E27 & E26 fast print
Give your space a radical modern and stylish vibe with this fast-print pendant light exploring 3D printing weaving techniques!
It's 100% print-in-place without any supports. Any 3D printer can print it without exceptional print settings and a regular 0.4mm nozzle. (See settings below)
You can get the power cords from Amazon here: For Europe: E27 cord: https://amzn.to/3OVrZjK For the US: E26/E27 cord: https://amzn.to/3V5VYJB
Happy printing!
DIMENSIONS | W 143mm x 90 mm x H 250 mm
PRINTING | Shade 3~4h
Bulbe socket | E27 & E26
3D PRINT SETTINGS This shade prints upside-down. (the STL file is already oriented properly) No need for supports, infill or brim.
For cleaner sides than on the pictures I took (if you want an invisible seam) make sure to set the z seam alignment on a sharp edge. I made the mistake of accidentally setting it in the middle of the plain sides, so the seam is visible when the light is on.
For BambuLab users, turn on "Arachne" mode in the "Wall Generator" settings. Otherwise Bambu Studio will detect some of the weave layers as empty.
Layer height: 0.2 or 0.3mm/layer (shade in pictures was printed in 0.3mm/layer) Wall line count: 2 top layers: 5 Bottom layers: 3 Build adhesion type: None. If you have adhesion issues, you can add a 5~6mm brim. Supports: None Infill: None