SKEP | Pendant Light E27 & E26 fast print
Give your space a radical modern and stylish vibe with this fast-print pendant light exploring 3D printing weaving techniques!
It's 100% print-in-place without any supports. Any 3D printer can print it without exceptional print settings and a regular 0.4mm nozzle. (See settings below)
You can get the power cords from Amazon here: For Europe: E27 cord: https://amzn.to/3OVrZjK For the US: E26/E27 cord: https://amzn.to/3V5VYJB
Happy printing!
DIMENSIONS | W 143mm x 90 mm x H 250 mm
PRINTING | Shade 3~4h
Bulbe socket | E27 & E26
3D PRINT SETTINGS This shade prints upside-down. (the STL file is already oriented properly) No need for supports, infill or brim.
For cleaner sides than on the pictures I took (if you want an invisible seam) make sure to set the z seam alignment on a sharp edge. I made the mistake of accidentally setting it in the middle of the plain sides, so the seam is visible when the light is on.
Resolution: 0.2 or 0.3mm/layer (shade in pictures was printed in 0.3mm/layer) Wall line count: 2 top layers: 5 Bottom layers: 3 Build adhesion type: None. If you have adhesion issues, you can add a 5~6mm brim. Supports: None Infill: None