With the master rising so do the mindless minions - Wallart
byBooneCo3dAnother bonus, this of a demon leader raising his mindless minions.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 168x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Orange At layer #12 (1.04mm) swap to Ice Blue
Border Only Colors from here until the end. At layer #20 (1.68mm) swap to Jade White for the rest.