tracking pixel
Michael M

With the master rising so do the mindless minions - Wallart

by
BooneCo3d
Follow
Follow
Remix Model
BooneCo3d
BooneCo3d
|
Image 1 of 3
With the master rising so do the mindless minions - Wallart 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 3
With the master rising so do the mindless minions - Wallart 3d model
2D
3D
Makes
With the master rising so do the mindless minions - Wallart 3d model
With the master rising so do the mindless minions - Wallart 3d model
With the master rising so do the mindless minions - Wallart 3d model

Another bonus, this of a demon leader raising his mindless minions.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 168x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Orange At layer #12 (1.04mm) swap to Ice Blue

Border Only Colors from here until the end. At layer #20 (1.68mm) swap to Jade White for the rest.


0 Likes0 DownloadsNovember 8, 2024


0 Likes0 DownloadsNovember 8, 2024