This is the colored insert series. How it works?

1) Just print it lying down. Since i use textured plate i usually flip it so that facing part is good looking.

2) I printed the STEP file as its good on the curved part. Also print the "blank insert" in white color filament as its good to diffuse the background light.

3) This file only contain box and insert only. Place this insert into the box slots and install the LED light and then you should be good to go.

4) Open your slicer and split the file into individual pieces so that you can move the slots around. I use Orca slicer to "split into object".

Itachi Light Show (Anime Naruto)

itachi.stl

This is the colored insert series. How it works?

1) Just print it lying down. Since i use textured plate i usually flip it so that facing part is good looking.

2) I printed the STEP file as its good on the curved part. Also print the "blank insert" in white color filament as its good to diffuse the background light.

3) This file only contain insert ONLY. Search my LED box model and print it. Then place this insert into slots and install the LED light and then you should be good to go.

4) Open your slicer and split the file into 5 individual pieces so that you can move the slots around. I use Orca slicer to "split into object".

Glowku Lumos ( Anime Dragonball )

goku.stl

This is the insert for 2024 Chinese New Year year of the dragon. How it works?

I printed everything in white and only colored the LED light. 

CNY year of the dragon 2024

CNY year of the dragon 2024.step

Anya chuckleagent ( anime Spy x family )

anya.step

This is the colored insert series. How it works?

1) Just print it lying down. Since i use textured plate i usually flip it so that facing part is good looking.

2) I printed the STEP file as its good on the curved part. Also print the "blank insert" in white color filament as its good to diffuse the background light.

3) This file only contain insert ONLY. Search my LED box model and print it. Then place this insert into slots and install the LED light and then you should be good to go.

4) Open your slicer and split the file into 6 individual pieces so that you can move the slots around before printing. I use Orca slicer to "split into object".

Laughy Luffy "insert" (one piece)

cs-003cs-luffy.step

This is the colored insert series. How it works?

1) Just print it lying down. Since i use textured plate i usually flip it so that facing part is good looking.

2) I printed the STEP file as its good on the curved part. Also print the "blank insert" in white color filament as its good to diffuse the background light.

3) This file only contain insert ONLY. Search my LED box model and print it. Then place this insert into slots and install the LED light and then you should be good to go.

4) Open your slicer and split the file into 6 individual pieces so that you can move the slots around. I use Orca slicer to "split into object".

Sasuke Sassy Spark "insert"

sasuke.step

This is the colored insert series. How it works?

1) Just print it lying down. Since i use textured plate i usually flip it so that facing part is good looking.

2) I printed the STEP file as its good on the curved part. Also print the "blank insert" in white color filament as its good to diffuse the background light.

3) This file only contain insert ONLY. Search my LED box model and print it. Then place this insert into slots and install the LED light and then you should be good to go.

4) Open your slicer and split the file into 6 individual pieces so that you can move the slots around. I use Orca slicer to "split into object".

4) The order is important here. The top is the first to be slotted in my LED box and the the bottom one is the last to be slotted it.

5) For the color you can just follow my picture. Otherwise here are basic color from Top to bottom order: black, maroon,light skin color, skin color, black, blue, black

Tanjiro twinkle "insert"

tanjiro.step

This is the colored insert series. How it works?

1) Just print it lying down. Since i use textured plate i usually flip it so that facing part is good looking.

2) I printed the STEP file as its good on the curved part. Also print the "blank insert" in white color filament as its good to diffuse the background light.

3) This file only contain insert ONLY. Search my LED box model and print it. Then place this insert into slots and install the LED light and then you should be good to go.

4) Open your slicer and split the file into 5 individual pieces so that you can move the slots around. I use Orca slicer to "split into object".

4) The order matters here. The top is the first to be slotted in my LED box and the the bottom one is the last to be slotted it.

5) For the color you can just follow my picture. Otherwise here are basic color from Top to bottom order: yellow, silver, skin color, orange, yellow.

Naruto glowkage "Insert"

naruto.step

This is the colored insert series. How it works?

1) Just print it lying down. Since i use textured plate i usually flip it so that facing part is good looking.

2) Again i printed the STEP file as its good on the curved part. Also print the "blank insert" in white color filament as its good to diffuse the background light.

3) Find my LED box model and print it. Then place this insert into slots and install the LED light and then you should be good to go.

4) Open your slicer and split the file into 5 individual pieces so that you can move the slots around. I use Orca slicer to "split into object".

4) The order matters here. The bottom is the first to be slotted in my LED box and the the top one is the last to be slotted it.

5) For the color you can follow my picture. Otherwise here are basic color from Top to bottom order: Black, skin color, lighter skin color, dark green, light green.

Zoro glow "Insert"

cs-001cs-zoro.stl

This is the insert for Zoro. How it works?

1) Just print it lying down. Since i use textured plate i usually flip it so that facing part is good looking.

2) Again i printed the STEP file as its good on the curved part. Also print the blank insert in white color filament as its good to diffuse the background light.

3) Find my LED box model and print it. Then place this insert into any of the 9 slots and install the LED light and then you should be good to go.

4) Although i make it with tight tolerance, this insert is removable and can be swap of mix with other insert.

5) The order of the insert doesn't matter

Zoro fight "Insert"

001m-zoro stl.stl

This is the insert for Robin. How it works?

1) Just print it lying down. Since i use textured plate i usually flip it so that facing part is good looking.

2) Again i printed the STEP file as its good on the curved part. Also print the blank insert in white color filament as its good to diffuse the background light.

3) Find my LED box model and print it. Then place this insert into any of the 9 slots and install the LED light and then you should be good to go.

4) Although i make it with tight tolerance, this insert is removable and can be swap of mix with other insert.

Wanted Robin "Insert"

010ss-robin.step

010ss-robin.stl

This is the insert for Chopper. How it works?

1) Just print it lying down. Since i use textured plate i usually flip it so that facing part is good looking.

2) Again i printed the STEP file as its good on the curved part. Also print the blank insert in white color filament as its good to diffuse the background light.

3) Find my LED box model and print it. Then place this insert into any of the 9 slots and install the LED light and then you should be good to go.

4) Although i make it with tight tolerance, this insert is removable and can be swap of mix with other insert.

Wanted Chopper "Insert"

009ss-chopper.step

This is the insert for Sanji. How it works?

1) Just print it lying down. Since i use textured plate i usually flip it so that facing part is good looking.

2) Again i printed the STEP file as its good on the curved part. Also print the blank insert in white color filament as its good to diffuse the background light.

3) Find my LED box model and print it. Then place this insert into any of the 9 slots and install the LED light and then you should be good to go.

4) Although i make it with tight tolerance, this insert is removable and can be swap of mix with other insert.

Wanted Sanji "Insert"

ss-008ss-sanji.stl

This is the insert for Usopp. How it works?

1) Just print it lying down. Since i use textured plate i usually flip it so that facing part is good looking.

2) Again i printed the STEP file as its good on the curved part. Also print the blank insert in white color filament as its good to diffuse the background light.

3) Find my LED box model and print it. Then place this insert into any of the 9 slots and install the LED light and then you should be good to go.

4) Although i make it with tight tolerance, this insert is removable and can be swap of mix with other insert.

Wanted Usop "Insert"

ss-007ss-usopp.step

This is the insert for Luffy gear 5. How it works?

1) Just print it lying down. Since i use textured plate i usually flip it so that facing part is good looking.

2) Again i printed the STEP file as its good on the curved part. Also print the blank insert in white color filament as its good to diffuse the background light.

3) Find my LED box model and print it. Then place this insert into any of the 9 slots and install the LED light and then you should be good to go.

4) Although i make it with tight tolerance, this insert is removable and can be swap of mix with other insert. Happy printing more to come in the future :).

Wanted Luffy gear 5 "Insert"

ss-006ss-luffy.step

This is the insert for Nami. How it works?

1) Just print it lying down. Since i use textured plate i usually flip it so that facing part is good looking.

2) Again i printed the STEP file as its good on the curved part. Also print the blank insert in white color filament as its good to diffuse the background light.

3) Find my LED box model and print it. Then place this insert into any of the 9 slots and install the LED light and then you should be good to go.

4) Although i make it with tight tolerance, this insert is removable and can be swap of mix with other insert. Happy printing more to come in the future :).

Wanted Nami "Insert"

ss-005ss-nami.step

This is the insert for Luffy. How it works?

1) Just print it lying down. Since i use textured plate i usually flip it so that facing part is good looking.

2) Again i printed the STEP file as its good on the curved part. Also print the blank insert in white color filament as its good to diffuse the background light.

3) Find my LED box model and print it. Then place this insert into any of the 9 slots and install the LED light and then you should be good to go.

4) Although i make it with tight tolerance, this insert is removable and can be swap of mix with other insert. Happy printing more to come in the future :).

Wanted Luffy "Insert"

ss-004ss-luffy.stl

This is the insert for Zoro. How it works?

1) Just print it lying down. Since i use textured plate i usually flip it so that facing part is good looking.

2) Again i printed the STEP file as its good on the curved part. Also print the blank insert in white color filament as its good to diffuse the background light.

3) Find my LED box model and print it. Then place this insert into any of the 9 slots and install the LED light and then you should be good to go.

4) Although i make it with tight tolerance, this insert is removable and can be swap of mix with other insert. Happy printing more to come in the future :).

Wanted Zoro "Insert"

002ss-zoro.step

I design this to make light box much more easier to be made. How? By 3D printing it. Below are tips of how the box works:

1) The curved hook inside the box is to attached any LED light strip all round the box and the wire can go out from the back slot.

2) You can print it with no support needed!. Just follow the orientation shown in the picture.

3) I made the tolerance for the box and its lid to be really fit and i printed with standard 0.4mm nozzle and Bambu lab P1P printer.

4) Why is there 9 slots on side? It is to give enough space for background light as well so that you can place or swap any of my "inserts"!

5) I have also include the STEP so that its good on the curve.

General LED box

General LED box stl.stl

General LED box stp.step

cs-001cs-zoro.step

I am actively diving into the realm of 3D modeling to expand my creative horizons and as a hobby. Bear with me as i came from  2D background. This account serves as a documentation of my learning journey and a platform to showcase the creations I bring to life. Join me as I share my progress and contribute to the exciting 3D printing community.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

<div class="markdown"><p>I am actively diving into the realm of 3D modeling to expand my creative horizons and as a hobby. Bear with me as i came from  2D background. This account serves as a documentation of my learning journey and a platform to showcase the creations I bring to life. Join me as I share my progress and contribute to the exciting 3D printing community.</p></div>

BasicBend

Pinned models

Zoro glow "Insert"

Itachi Light Show (Anime Naruto)

Glowku Lumos ( Anime Dragonball )

CNY year of the dragon 2024

Anya chuckleagent ( anime Spy x family )

Laughy Luffy "insert" (one piece)

Sasuke Sassy Spark "insert"

Tanjiro twinkle "insert"

Naruto glowkage "Insert"

Zoro glow "Insert"

Zoro fight "Insert"

Wanted Robin "Insert"

Wanted Chopper "Insert"

Wanted Sanji "Insert"

Wanted Usop "Insert"

Wanted Luffy gear 5 "Insert"

Wanted Nami "Insert"

Wanted Luffy "Insert"

Wanted Zoro "Insert"

General LED box