tracking pixel
3DParts4U

Trashcan 'Wave'

by
3dparts4u
Follow
Follow
Remix Model
3dparts4u
3dparts4u
Image 1 of 6
Trashcan 'Wave' 3d model
2D
3D
Makes
Trashcan 'Wave' 3d model
Trashcan 'Wave' 3d model
Trashcan 'Wave' 3d model
Trashcan 'Wave' 3d model
Trashcan 'Wave' 3d model
Trashcan 'Wave' 3d model
This model is restricted by licensing terms. 
2 Likes5 DownloadsMarch 19, 2022
This model is restricted by licensing terms. 


I designed my own trashcan to collect my 3D print waste. It consists of two parts. Glue the two parts together with some (transparent!) glue and you have a multicolor trash can if you print it like i did. You can also try to print it in other colors, even non transparent.

🎞First video: https://youtu.be/CJGnZsBCzm0 🎞Second video: https://youtu.be/cVQ-OWQv0S0

⚠ Usage of any models from 3DParts4U will be at your own risk!

⚙ My PLA Simplify3D print settings:

  • 3600mm/minute (60mm/second) (vase mode)
  • hotend 185°C | bed 50°C
  • 250 micron | infill 20%
  • 0 top layers | 5 bottom layers | 1 outline layer
  • brass nozzle 0.35mm
  • extrusion width 0.44mm
  • retraction 1.00mm
  • extrusion multiplier 0.95
  • coasting 0.30mm
  • wipe distance off
  • fan 75%
  • no support needed

2 Likes5 DownloadsMarch 19, 2022




This model is restricted by licensing terms. 
2 Likes5 DownloadsMarch 19, 2022
This model is restricted by licensing terms.