A 5.000 subscriber souvenir for YouTube. Thanks for subscribing!

🎞 Video: https://youtu.be/7jHTLdgIKIM

⚠ Usage of any models from 3DParts4U will be at your own risk!

⚙ My PLA Simplify3D print settings:

· 2400mm/minute (40mm/second) (small parts 700mm/minute (11.7mm/second))
· hotend 185°C | bed 50°C
· 250 micron | infill 15%
· 3 top layers | 3 bottom layers | 3 outline layers
· brass nozzle 0.35mm
· extrusion width 0.44mm
· retraction 1.50mm
· retraction speed 3600mm/minute (60mm/second)
· extrusion multiplier 1.00
· coasting 0.50mm
· wipe distance off
· cooling fan 100% (from layer 2)
· no supports

#3DParts4U #AllVisuals4U #Printables
#YouTubeVideo #ContentCreator
#3DPrinted #3DPrint #3DPrinting #Useful
#Subscriber #Subscribers #YouTube #Souvenir

YouTube Subscribers '5.000'

Plate.stl

Here's a label you can use to show that something is 3D printed!

🎞 How i 3D printed it: https://youtu.be/LxJUnhz8YxA
🎞 How i designed it: https://youtu.be/82D_v-SeDJE

⚠ Usage of any models from 3DParts4U will be at your own risk!

⚙ My PLA Simplify3D print settings:

· 2400mm/minute (40mm/second)
· hotend 185°C | bed 50°C
· 250 micron | infill 15%
· 3 top layers | 3 bottom layers | 2 outline layers
· brass nozzle 0.35mm
· extrusion width 0.44mm
· retraction 1.50mm
- retraction speed 3600mm/minute (60mm/second)
· extrusion multiplier 1.00
· coasting 0.50mm
· wipe distance off
· cooling fan 100% (from layer 2)
· no supports

#3DParts4U #AllVisuals4U #Printables
#YouTubeVideo #ContentCreator
#3DPrinted #3DPrint #3DPrinting #Useful
#Label #FreeCAD

Label '3D Printed'

Label '3D Printed'.stl

I designed my own trashcan to collect my 3D print waste. It consists of two parts.
Glue the two parts together with some (transparent!) glue and you have a multicolor trash can if you print it like i did.
You can also try to print it in other colors, even non transparent.

🎞First video: https://youtu.be/CJGnZsBCzm0
🎞Second video: https://youtu.be/cVQ-OWQv0S0

⚠ Usage of any models from 3DParts4U will be at your own risk!

⚙ My PLA Simplify3D print settings:

- 3600mm/minute (60mm/second) (vase mode)
- hotend 185°C | bed 50°C
- 250 micron | infill 20%
- 0 top layers | 5 bottom layers | 1 outline layer
- brass nozzle 0.35mm
- extrusion width 0.44mm
- retraction 1.00mm
- extrusion multiplier 0.95
- coasting 0.30mm
- wipe distance off
- fan 75%
- no support needed

Trashcan 'Wave'

Trashcan 'Wave'_Bottom.step

I designed my own christmas decoration in the shape of this tree look a like.
You can put a light source inside it (make sure it's not hot) or use it as a vase.
The height is 110mm.

🎞 How i designed it: https://youtu.be/GJ6lbMj3eY4
🎞 How i 3D printed it: https://youtu.be/NIrckVw8nxA

I printed a tree with 3.2mm thick walls scaled down to a 37.5% size, which results in a 1.2mm wall.
I also printed a tree with 3.2mm thick walls scaled down to a 25% size, which results in a 0.8mm wall.

You can experiment with different sizes (wall thickness). The 100% scale version has a wall thickness of 3.2mm.
I also added files with a wall thickness of 0.4mm, but it's probably more difficult to print. I used an extrusion width of 0.40mm.

⚠ Usage of any models from 3DParts4U will be at your own risk!

⚙ My PLA Simplify3D print settings:

- 3600mm/minute (60mm/second)
- hotend 185°C | bed 50°C
- 250 micron | infill 15%
- 2 top layers | 2 bottom layers | 2 outline layers
- brass nozzle 0.35mm
- extrusion width 0.40mm
- retraction 1.00mm
- extrusion multiplier 1.00
- coasting 0.30mm
- wipe distance 5.00mm
- fan 100%
- no support needed

Xmas Tree 'Vase'

I designed my own christmas decoration in the shape of this tree look a like.
You can put a light source inside it (make sure it's not hot) or use it as a vase.
The height is 110mm.

🎞 How i designed it: https://youtu.be/GJ6lbMj3eY4
🎞 How i 3D printed it: https://youtu.be/NIrckVw8nxA

I printed a tree with 3.2mm thick walls scaled down to a 37.5% size, which results in a 1.2mm wall.
I also printed a tree with 3.2mm thick walls scaled down to a 25% size, which results in a 0.8mm wall.

You can experiment with different sizes (wall thickness). The 100% scale version has a wall thickness of 3.2mm.
I also added files with a wall thickness of 0.4mm, but it's probably more difficult to print. I used an extrusion width of 0.40mm.

Support me:
🛒 My affiliate links: https://www.3dpartsforyou.com/affiliate-shops
☕ Buy me a coffee: https://ko-fi.com/AllVisuals4U
💱 Send Bitcoin: 3Pb8UaLiZDzb7mXr9EN1QCm9Ec2kDDUQpk

⚠ Usage of any models from 3DParts4U will be at your own risk!

⚙ My PLA Simplify3D print settings:

- 3600mm/minute (60mm/second)
- hotend 185°C | bed 50°C
- 250 micron | infill 15%
- 2 top layers | 2 bottom layers | 2 outline layers
- brass nozzle 0.35mm
- extrusion width 0.40mm
- retraction 1.00mm
- extrusion multiplier 1.00
- coasting 0.30mm
- wipe distance 5.00mm
- fan 100%
- no support needed

Xmas_Tree_'Vase'_3.2.step

Xmas_Tree_'Vase'_0.4.step

Xmas_Tree_'Vase'_0.4.stl

I designed this endless filament spool holder in FreeCAD! It consists of three different parts: a rod, connector and a stand. By connecting them to each other, you can create a very long spool holder!

🎞 Long video: https://youtu.be/p2gAiy2ZMls
⚡ Short video: https://youtu.be/28zktCzvBWE

⚠ Usage of any models from 3DParts4U will be at your own risk!

⚙ My PLA Simplify3D print settings:

- 3600mm/minute (60mm/second)
- hotend 185°C | bed 50°C
- 250 micron | infill 15%
- 3 top layers | 3 bottom layers | 3 outline layers
- brass nozzle 0.35mm
- extrusion width 0.44mm
- retraction 1.00mm
- extrusion multiplier 0.95
- coasting 0.30mm
- wipe distance off
- fan 75%
- only support with the connectors

Spool Holder 'Endless'

Rod.stl

I made some coasters with a QR code on it! Easy to 3D print and useful. Using a 3D printed cover will probably result in an unscannable QR code.

🎞 How i 3D printed it: https://youtu.be/1SgIq1xIRIw
🎞 How i designed it: https://youtu.be/h3NRRH9Jj3s

⚠ Usage of any models from 3DParts4U will be at your own risk!

⚙ My PLA Simplify3D print settings:

- 3600mm/minute (60mm/second)
- hotend 185°C | bed 50°C
- 250 micron | infill 15%
- 3 top layers | 3 bottom layers | 2 outline layers
- brass nozzle 0.35mm
- extrusion width 0.44mm
- retraction 1.00mm
- extrusion multiplier 0.95
- coasting 0.30mm
- wipe distance off
- fan 75%
- no support needed

Coaster 'QR'

I made some coasters with a QR code on it! Easy to 3D print and useful. Using a 3D printed cover will probably result in an unscannable QR code.

🔽 Download Coaster 'QR' for free on Thangs: 

🎞 Video about this 3D print: https://youtu.be/1SgIq1xIRIw

🌐 My website: https://www.3dpartsforyou.com
🛒 My affiliate links: https://www.3dpartsforyou.com/affiliate-shops

#3DParts4U #AllVisuals4U #3DPrinting #3DPrint #3DPrinted #Coaster #QR #QRCode #Useful #Lifehacks

Coaster 'QR'.step

I am a 3D print enthusiast from the Netherlands and i like to share my design and 3D printing projects with you. Get inspired and learn 3D printing and design for free!

🌐 My website: https://www.3dpartsforyou.com

⚠ Usage of any models from 3DParts4U will be at your own risk!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

3dparts4u

Achievements