tracking pixel
3DParts4U

Spool Holder 'Endless'

by
3dparts4u
Follow
Follow
Remix Model
3dparts4u
3dparts4u
Image 1 of 4
Spool Holder 'Endless' 3d model
2D
3D
Makes
Spool Holder 'Endless' 3d model
Spool Holder 'Endless' 3d model
Spool Holder 'Endless' 3d model
Spool Holder 'Endless' 3d model
This model is restricted by licensing terms. 
2 Likes9 DownloadsMarch 6, 2022
This model is restricted by licensing terms. 


I designed this endless filament spool holder in FreeCAD! It consists of three different parts: a rod, connector and a stand. By connecting them to each other, you can create a very long spool holder!

🎞 Long video: https://youtu.be/p2gAiy2ZMls ⚡ Short video: https://youtu.be/28zktCzvBWE

⚠ Usage of any models from 3DParts4U will be at your own risk!

⚙ My PLA Simplify3D print settings:

  • 3600mm/minute (60mm/second)
  • hotend 185°C | bed 50°C
  • 250 micron | infill 15%
  • 3 top layers | 3 bottom layers | 3 outline layers
  • brass nozzle 0.35mm
  • extrusion width 0.44mm
  • retraction 1.00mm
  • extrusion multiplier 0.95
  • coasting 0.30mm
  • wipe distance off
  • fan 75%
  • only support with the connectors

2 Likes9 DownloadsMarch 6, 2022




This model is restricted by licensing terms. 
2 Likes9 DownloadsMarch 6, 2022
This model is restricted by licensing terms.