Spool Holder 'Endless'

I designed this endless filament spool holder in FreeCAD! It consists of three different parts: a rod, connector and a stand. By connecting them to each other, you can create a very long spool holder!

🎞 Long video: https://youtu.be/p2gAiy2ZMls ⚡ Short video: https://youtu.be/28zktCzvBWE

⚠ Usage of any models from 3DParts4U will be at your own risk!

⚙ My PLA Simplify3D print settings:

• 3600mm/minute (60mm/second)
• hotend 185°C | bed 50°C
• 250 micron | infill 15%
• 3 top layers | 3 bottom layers | 3 outline layers
• brass nozzle 0.35mm
• extrusion width 0.44mm
• retraction 1.00mm
• extrusion multiplier 0.95
• coasting 0.30mm
• wipe distance off
• fan 75%
• only support with the connectors