2x3x7.4mm Gridfinity Drawers.

Tested in PLA, printed with body cavity facing upwards and with only tiny supports between the gridfinity rows on a Elegoo Neptune 2 model.

Suggest minimal cubic infill (5-10%) with 3-4 outer walls.

 * Added drawer model with thicker walls.
* Refined drawer model for a better fit into the slots horizontally.
* Added two-compartment drawer model.
* Added drawer with a tighter horizontal fit.
* Added double-height drawer model.
* Added Minifinity drawer model.

* Organize your Gridfinity Drawers with Minifinity!
https://social.thangs.com/m/195636

Gridfinity concept by Zack Freedman

Gridfinity Drawers

Gridfinity_Drawers_2x3_Chest.stl

Gridfinity_Drawers_Drawer_Thicker.stl

Gridfinity_Drawers_Drawer_Thicker_Two_Compartment.stl

Gridfinity_Drawers_Drawer_Thicker_Tighter_Fit.stl

Gridfinity_Drawers_Drawer_Double_Height.stl

Drawers_Minifinity_4x6.stl

Introducing the most useless Gridfinity accessory-for-an-accessory yet: Minifinity.

Are you finding your Gridfinity Drawers to be untidy?  Organize them with Minifinity!

**Simply print this baseplate (I suggest MSLA machines), and then print your favorite Gridfinity modules at 42% for a perfect fit into Minifinity.**

* Download and print Gridfinity Drawers here!
https://social.thangs.com/m/188528

Minifinity  |  Gridfinity Drawers Baseplate

Introducing the most useless Gridfinity accessory-for-an-accessory yet: Minifinity.

Are you finding your Gridfinity Drawers to be untidy?  Organize them with Minifinity!

Simply print this baseplate (I suggest MSLA machines), and then print your favorite Gridfinity modules at 42% for a perfect fit into Minifinity.

P.S. This is really dumb, don't waste your resin on my flights of fancy.

A 1x1 set of Gridfinity bins, sized so that they line up to form tiered rows when arrange by height.

Suggest standard printing profiles.

Gridfinity by Zack Freedman.

Gridfinity | Tiered Bins

Gridfinity_tiered_1x1_sm.stl

I wasn't a big fan of any of the other #Gridfinity compatible AA battery holders, so I decided to make my own.

Made using [brian.kerley](https://thangs.com/designer/brian.kerley)'s [Gridfinity | Hole Customizer](https://thangs.com/designer/brian.kerley/3d-model/Gridfinity%2520%257C%2520Hole%2520Customizer-62607). Thanks Brian!

Gridfinity 2x1 10xAA Battery Holder

I wasn't a big fan of any of the other Gridfinity compatible AA battery holders, so I decided to make my own.

Made using [brian.kerley](https://thangs.com/designer/brian.kerley)'s [Gridfinity | Hole Customizer](https://thangs.com/designer/brian.kerley/3d-model/Gridfinity%2520%257C%2520Hole%2520Customizer-62607). Thanks Brian!

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin 100mm: https://social.thangs.com/m/664302 


See here for 1x2 unit bins:
Chain Link Gridfinity Bin 1x2 40mm: https://social.thangs.com/m/688026 
Chain Link Gridfinity Bin 1x2 60mm: https://social.thangs.com/m/688029 
Chain Link Gridfinity Bin 1x2 80mm: https://social.thangs.com/m/688031 
Chain Link Gridfinity Bin 1x2 100mm: https://social.thangs.com/m/688034

See here for 2x2 bins:
Chain Link Gridfinity Bin 2x2 20mm: https://social.thangs.com/m/714038 
Chain Link Gridfinity Bin 2x2 40mm: https://social.thangs.com/m/714060 
Chain Link Gridfinity Bin 2x2 60mm: https://social.thangs.com/m/714082 
Chain Link Gridfinity Bin 2x2 80mm: https://social.thangs.com/m/714105 



Chain Link Gridfinity Bin 40mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm:
Chain Link Gridfinity Bin 60mm:
Chain Link Gridfinity Bin 80mm:
Chain Link Gridfinity Bin 100mm:


A 2x2x1u Can holder for your Gridfinity setup.  Short and Tall versions available.

Suggest printing using standard profiles using no supports.

Gridfinity by Zack Freedman

Gridfinity | Can Holder

Gridfinity_Canholder_Tall.stl

Small screw sorters for both metric and inch screws, fits in 2x1 Gridfinity, and can stack.

Metric has 1mm marks from 1-20mm, then 5mm marks from 25mm-70mm, and thread holes for M2-M6 holes

Inch has marks for 1/8" increments up until 2 3/4"

Screw Sorters, Gridfinity Compatible

metricScrewSorter.stl

A 1x3x3 Drawer in a looooong format, based upon the Gridfinity framework developed by Zack Freedman.

Suggest standard printing profiles for the chest, printed with body cavity facing upwards (tall and skinny-like), and printing the drawer piece with the body cavity facing upwards (trough-style) as well.

Gridfinity |  Long Drawer

Gridfinity_LongDrawer_2_Compartment_Drawer.stl

Gridfinity_LongDrawer_3_Compartment_Drawer.stl

Gridfinity_LongDrawer_Drawer.stl

A 3x3x32cm Paper Towel Roll holder for your  Gridfinity arrangement.

Suggest standard profiles with 25%-50% infill. There is a thicc area at the bottom of the dowel for increased strength.

Gridfinity concept by Zack Freedman

Gridfinity | Paper Towel Roll

I couldn't find a set of drawers that weren't somehow a compromise for me... I had these requirements.

1. Standard height bins (like the snazzy vase mode ones with the labels)
2. Compact, with just 4 bin wide and 3 bin short
3. No supports for printing
4. Stackable without too much headache

I had a few iterations and this is the one that I like. The drawers have about .5mm gap all the way around to account for any warping on a normal draft print. The pulls on the front have fillets to eliminate supports. I printed the drawers in 3 different quality settings and found no discernible difference in the fitment.

The carcass has big openings in the back to ease in the opening and closing of the drawers. On early iterations, it had that extremely satisfying piston effect with really tight tolerances… but I couldn't get the dang drawers open. So this gives me better function. 

The little feet will nest nicely in the mated extrusion in the top, with a little taper to the feet for a snug fit. I considered reversing the extrude on the feet to recess it for magnets top and bottom. Still, after some time, it seemed unnecessary to stick them together like that… it was more secure than simple stacking but not as secure as some fastener, so it just wasn't worth the extra post print work to me.

I included the fusion 360 drawings. It is based on a Gridfinity parametric base ([I can't figure out who the original author is but here's the link](https://myhub.autodesk360.com/ue2b114c8/g/shares/SH35dfcQT936092f0e439591db365903a026)) I found on Reddit, which I butchered during my process… so no more parameters unless you like chaos. Originally I was going to make it empty and drop in a pre-printed base but found this template to grab. I am a TOTAL noob when it comes to 3d printing, so simmer down when you see all my inefficient methods. :-)

Big thanks to the [Anchorage Makerspace](https://www.anchoragemakerspace.com) for the training and the tools to learn to do this. NOICE!



Gridfinity Drawer Cabinet with 3x4 standard height bin grid

Grid drawer 3x4 v6 - carcass.stl

Based on my original small Rugged Desktop Organizer, now biggie sized and GRIDFINITY COMPATIBLE 2x3!

**Includes Bambu Studio single and 2 color .3mf files.**

Rugged Organizer LARGE Gridfinity 2x3

Rugged_Organizer_LG_Gridfinity2x3.stl

A 2x2x1.5u Gridfinity module with a stylish phone stand.  Looks great in wood-fill PLA. 

Suggest printing with standard printing profiles with auto-generated supports at 0%-1% dentsity.

Gridfinity | Phone Stand

I needed a tool I could not find (and was happy to procrastinate on the next project by working on this one first). I wanted a quick set of reference radius gauges to use when designing. I needed interiors and exterior curves, and then decided to park them all in a Gridfinity base.

This set covers 10-25 mm sizes, and they all live inside a handy Gridfinity storage box when not in use. The box is fitted to each size, and all slots are labeled for ease of use.

Then, I liked this set so much, I made another set for the [1-10mm sizes in a pocket-friendly package](https://thangs.com/mythangs/file/871761).

Looking now, I see a few similar kits which are all nice. Anyway, here's mine.

_Please note_ This tool gives the _radius_ size, but many cad programs use _diameter_ sizes when drawing circles.

Radius Tool with Gridfinity Base

Gridfinity Metric Radius Kit base.stl

A 3x3x1u Gridfinity Swing-Out Drawer.

Suggest printing with the drawer with body cavity facing upwards, and no supports.  Suggest printing body vertically, with the angled bridge pieces near the bottom, and no supports.

Gridfinity concept by Zack Freedman.

Gridfinity | Swinging Drawer

Gridfinity_Swinging_Drawer_Drawer.stl

A 1x3x3 flip-top, snap-held container based upon the Gridfinity framework developed by Zack Freedman.

Suggest standard printing profiles with no supports for the bottom piece, and to print the top piece vertically with the fat part on the bottom, using minimal supports under the fat part.



Gridfinity Flip-Top Container

FlipUp_Container_Bottom.stl

**NOTE**: nothing to do with HSW (Honeycomb Storage Wall) ; these are just Gridfinity cups with honeycomb walls with metrics designed to minimize material.


Inspired by a question in the Gridfinity discord, this is a recreation of a
gridfinity cup with most of the wall material cut out by a hexagon grid.
This model was created similarly to the tunnerl riser above,
using [vector76] gridfinity mmodules and [bosl2] to manage the hexagaon window cutouts.

A potential use here would be a stackable bin, whose contents would still be
visble thru the side when stacked (see the primay 2x2x6 model).

Another use would be for a non-stacking pen cup (see the 1x1x12 nolip model).

The underlying OpenSCAD parametric model is part of my [gridfinity riser](https://github.com/jcorbin/gridfinity-risers) repository for further customization. 
A similar cup can be seen in a picture uploaded by [ashleyi100 on thangs][ashleyi100]
which looks similar to this [non gridfinity box][hcomb_box] on printables.

[ashleyi100]: https://thangs.com/designer/ashleyi100
[bosl2]: https://github.com/revarbat/BOSL2
[hcomb_box]: https://www.printables.com/model/250845-honeycomb-pattern-box-with-label
[vector76]: https://github.com/vector76/gridfinity_openscad



Gridfinity Stackable Cups with Honeycomb Walls

hex_cup_2x2x6.stl

Based on the “sturdy and stylish” small and scalable Rugged Desktop Organizer is now **GRIDFINITY COMPATIBLE**  to offer more storage locations for more of your things.  New Single print to offer a nice finished look for your gridfinity storage.

Rugged Organizer Gridfinity 2x2

A 2x2x5.36cm Gridfinity container with a door that swings downward.

Suggest printing with standard profile, body piece with body cavity facing upward, and the door vertically with the fat, pegged part on the bottom, using generated supports, touching buildplate only at 1% support density.

Gridfinity | Door'd Container

Gridfinity_DoorBox_Body.stl

Stackable storage for paints in dropper bottles such as Vallejo, Army Painter etc. Colors visible from side of boxes and easily seen from above. Base file works for Army Painter and Vallejo paints, but parametric files allow other tpyes to be used, or smaller/larger layouts to be made. I have used these to make a custom size for dropper bottles I found online.

Although mainly aimed at miniature paints, could easily work for alcohol inks etc. if bottle is similar.

Can be somewhat filament intensive but results in a nice sturdy box.

Any problems, please let me know.

Gridfinity Dropper Paint Bottle Storage

Gridfinity Dropper Bottle Holder (Vallejo, Army Painter).stl

1x5x6 sized Gridfinity holder for utensils like spoons and forks. The "handle" portion of the model is shorter, which was the best solution for making it easy to grab the utensils themselves. You can still stack on top of the "business" end, but won't be able to stack over the handles. Has holes for magnets or screws.

GridfinityOther

Categories

Popular

Personalize

Trending