It's Todd! Print his loving gaze to enjoy in the meatspace.

Todd (From Mario) | Drawfee Fanart

Todd_Body.stl

A 4x2 Gridfinity Bin with an peaked angle in the middle, and optional inserts for further organization.

Will print without supports in almost all cases.

Gridfinity by Zack Freedman.

Gridfinity | Angled Bin

Gridfinity_AngledBin.stl

A 2x2 Gridfinity Cubby with a breadbox-style door.  Created by request.

Will print without supports in almost all cases.

Gridfinity by Zack Freedman.

Gridfinity | Door'd Box Tallboy

DoorBoxTallBody.stl

Tested in PLA, printed with body cavity facing upwards and with only tiny supports between the gridfinity rows on a Elegoo Neptune 2 model.

Suggest minimal cubic infill (5-10%) with 3-4 outer walls.

Gridfinity by Zack Freedman.

Gridfinity | Swinger Trays

SwingerTrays_Tray.stl

A small charm with flat back for mounting on an earring stud.  A challenging build that requires steady hands for gluing cleanly.  Best printed using resin in batches.  There is usually a little spoilage in removal when you print this small.  Use 1 or maybe 2 sprues per piece.

Cassette Stud Earring

CassetteFront.stl

A small charm with added loupe for mounting.  Best printed using resin in batches.  There is usually a little spoilage in removal when you print this small.  Use 1 or maybe 2 sprues per piece.

Spoon Pipe Pendant

Glass_Spoon_Pipe.stl

A small charm with added loupe for mounting.  A challenging build that requires steady hands for gluing cleanly.  Best printed using resin in batches.  There is usually a little spoilage in removal when you print this small.  Use 1 or maybe 2 sprues per piece.

Toaster Oven Pendant

BodyLoupe.stl

A small, tasty charm with a loupe for mounting.  Best printed using resin in batches.  There is usually a little spoilage in removal when you print this small.  Use 1 or maybe 2 sprues per piece. Glue together sparingly and mount with an earring hook.

Soda Pop Earring

BottleCap.stl

A small, tasty charm with a loupe for mounting.  Best printed using resin in batches.  There is usually a little spoilage in removal when you print this small.  Use 1 or maybe 2 sprues per piece.

Cinnamon Roll Earrings

CinnamonRoll.stl

A small charm with a loupe for mounting.  Best printed using resin in batches.  There is usually a little spoilage in removal when you print this small.  Use 1 or maybe 2 sprues per piece.

Vinyl Record Earring | 80s Retro

VinylRecordLoupe.stl

A small, tasycharm with a loupe for mounting.  Best printed using resin in batches.  There is usually a little spoilage in removal when you print this small.  Use 1 or maybe 2 sprues per piece.

Cast Iron Skillet Pendant

CastIron.stl

A small, groovy charm with added loupe for mounting.  Best printed using resin in batches.  There is usually a little spoilage in removal when you print this small.  Use 1 or maybe 2 sprues per piece.

Chillum Pendant

Wine Glass Pendant

WineGlass_Loupe.stl

Boombox Earring | 80s Retro

Boombox_Body.stl

Chicken & Biscuit Earring

ChickenLeg.stl

Water Pipe Charm

A small, groovy charm with added loupe for mounting.  A challenging build that requires steady hands for gluing cleanly.  Best printed using resin in batches.  There is usually a little spoilage in removal when you print this small.  Use 1 or maybe 2 sprues per piece.

Chinese Takeout Charm

ChineseTakeoutBox.stl

Vape Pen Pendant

Body.stl

A 3x1 Gridfinity drawer with added height and length.  Created by request.

Will print without supports in almost all cases. 

Gridfinity by Zack Freedman.

Gridfinity | Long n' Tall Drawer

Gridfinity_LongNTall_Body.stl

Gridfinity_LongNTall_Drawer.stl

A small 1x2 caddy for the bathroom or kitchen.

Gridfinity by Zack Freedman.

Gridfinity | Kitchen Caddy Jr.

A 3x4 tiered general-use caddy for the kitchen.  Insertable tray modules included.

Gridfinity by Zack Freedman.

Gridfinity | Kitchen Caddy Sr.

Gridfinity_Kitchen_Caddy_Sr.stl

A stylish 3x3 Gridfinity bin, better used in the kitchen or bathroom where style may take precedence to funtion.

Print using standard profiles.

Gridfinity by Zack Freedman.

Gridfinity | Ziggurat Storage Bin

A small two-piece charm with a loupe for mounting.  The pieces snap together tightly once printed.  Suggest MSLA machines.

Hotdog Charm

Bun.stl

a 3x2xX Box dispenser for the Gridfinity system.  Print with supports only underneath the opening at the bottom, and using standard profiles.

*Revised opening for smoother dispensation.

Gridfinity by Zack Freedman.

Gridfinity | Cigfinity Pack Dispenser

Gridfinity_Cigfinity_Box.stl

A 'lil piece of toast with a pad of melted butter with a loupe for mounting various jewelry hardware.  Suggest printing in resin using standard profiles.

Buttered Toast Charm

Toast.stl

A collection of bins, pre-sized for the Minifinity drawers and inserts.  Suggest standard profiles for printing in filament or resin.  No supports required.

Minifinity Baseplate:
https://social.thangs.com/m/195636

Gridfinity Drawers:
https://social.thangs.com/m/188528

Gridfinity | Minifinity Bin Collection

minifinity_bin_4x1.stl

A 1x3 set of Gridfinity bins, sized so that they line up to form tiered rows when arranged by height.

Suggest standard printing profiles.

Gridfinity by Zack Freedman.

Gridfinity | Wide Tiered Bins

Gridfinity_Tiered_Wide_sm.stl

A 1x1 set of Gridfinity bins, sized so that they line up to form tiered rows when arrange by height.

Suggest standard printing profiles.

Gridfinity by Zack Freedman.

Gridfinity | Tiered Bins

Gridfinity_tiered_1x1_sm.stl

A tiny 3x3 Gridfinity baseplate charm, with a loupe added to the corner for attaching to your favorite keychain or bracelet.

Suggest printing in a tough-type resin for maximum durability.

Gridfinity | 3x3 Charm

A 2x1x1u Flip-top container that is opened by gently pressing at the back-top of the bin. Suggest standard printing profiles with 2-3 walls and top layers.

Gridfinity by Zack Freedman.

Gridfinity | Press n' Open Bin

Gridfinity_PressFlip_Bottom-Divided.stl

A 2x2x1u Can holder for your Gridfinity setup.  Short and Tall versions available.

Suggest printing using standard profiles using no supports.

Gridfinity by Zack Freedman

Gridfinity | Can Holder

Gridfinity_Canholder_Tall.stl

Bake up some tasty accessories with these Baguette Charms, easily added to a keychain or earring.

Suggest printing vertically in resin with minimal supports directly underneath.

Baguette Charm

A 2x2x1.5u Gridfinity module with a stylish phone stand.  Looks great in wood-fill PLA. 

Suggest printing with standard printing profiles with auto-generated supports at 0%-1% dentsity.

Gridfinity | Phone Stand

A 3x3x1u Gridfinity Swing-Out Drawer.

Suggest printing with the drawer with body cavity facing upwards, and no supports.  Suggest printing body vertically, with the angled bridge pieces near the bottom, and no supports.

Gridfinity concept by Zack Freedman.

Gridfinity | Swinging Drawer

Gridfinity_Swinging_Drawer_Drawer.stl

A 3x3x32cm Paper Towel Roll holder for your  Gridfinity arrangement.

Suggest standard profiles with 25%-50% infill. There is a thicc area at the bottom of the dowel for increased strength.

Gridfinity concept by Zack Freedman

Gridfinity | Paper Towel Roll

A 2x2x5.36cm Gridfinity container with a door that swings downward.

Suggest printing with standard profile, body piece with body cavity facing upward, and the door vertically with the fat, pegged part on the bottom, using generated supports, touching buildplate only at 1% support density.

Gridfinity | Door'd Container

Gridfinity_DoorBox_Body.stl

A 1x1x15cm Vertical drawer with a variety of drawer inserts.

Suggest printing with standard profiles, with body printed with body cavity facing upwards, and drawer printed with legs pointing upwards.

* Revised drawer inserts for a better X/Y axis fit.

Gridfinity | Vertical Drawer

Gridfinity_Vertical_Drawer_Body.stl

A small earring or charm styled like an ancient VHS tape.  Print using MSLA machines. 

Print the body, front, and tape spool black resin, and the spindles in white resin.  Assemble with tiny amounts of glue, and use a bit of transparent film or plastic, trimmed to size in the front.

VHS Tape Charm

Body_Loupe.stl

A 1x3x3 Drawer in a looooong format, based upon the Gridfinity framework developed by Zack Freedman.

Suggest standard printing profiles for the chest, printed with body cavity facing upwards (tall and skinny-like), and printing the drawer piece with the body cavity facing upwards (trough-style) as well.

Gridfinity |  Long Drawer

Gridfinity_LongDrawer_2_Compartment_Drawer.stl

Gridfinity_LongDrawer_3_Compartment_Drawer.stl

Gridfinity_LongDrawer_Drawer.stl

A simple charm piece composed of two parts, a cone and scoops.  Scoop components are provided with and without a loupe for mounting.

Ice Cream Cone Charm

Cone.stl

A set of 1x1x3 & 1x1x6 modules with a slightly sloped cylinder extruding from the center.  Perfect for organizing keyrings at a jewelry workstation.


Gridfinity Ring & Washer Collectors

1x1x3_Ring_Peg.stl

A perfect companion for the Hair Dryer Charm!

https://social.thangs.com/m/192984

A perfect accessory for the stylist in your life.
Print MSLA with minimal supports. I have printed successfully with only one or two support towers oriented with the pointy ends upwards.  Sprayed silver afterwards.

Stylist's Scissors Charm

Introducing the most useless Gridfinity accessory-for-an-accessory yet: Minifinity.

Are you finding your Gridfinity Drawers to be untidy?  Organize them with Minifinity!

**Simply print this baseplate (I suggest MSLA machines), and then print your favorite Gridfinity modules at 42% for a perfect fit into Minifinity.**

* Download and print Gridfinity Drawers here!
https://social.thangs.com/m/188528

Minifinity  |  Gridfinity Drawers Baseplate

Introducing the most useless Gridfinity accessory-for-an-accessory yet: Minifinity.

Are you finding your Gridfinity Drawers to be untidy?  Organize them with Minifinity!

Simply print this baseplate (I suggest MSLA machines), and then print your favorite Gridfinity modules at 42% for a perfect fit into Minifinity.

P.S. This is really dumb, don't waste your resin on my flights of fancy.

Drawers_Minifinity_4x6.stl

A multi-piece charm with an eyelet, needing some assembly.  A rewarding build, and a perfect gift for the hair stylist in your life.

Hair Dryer Charm

HairDryer_Body.stl

A 1x3x3 flip-top, snap-held container based upon the Gridfinity framework developed by Zack Freedman.

Suggest standard printing profiles with no supports for the bottom piece, and to print the top piece vertically with the fat part on the bottom, using minimal supports under the fat part.



Gridfinity Flip-Top Container

FlipUp_Container_Bottom.stl

A Tiki Cup sculpture with an attached eyelet for coupling to a keychain or any other charm retainer.

Tiki Cup Charm

2x3x7.4mm Gridfinity Drawers.

Tested in PLA, printed with body cavity facing upwards and with only tiny supports between the gridfinity rows on a Elegoo Neptune 2 model.

Suggest minimal cubic infill (5-10%) with 3-4 outer walls.

 * Added drawer model with thicker walls.
* Refined drawer model for a better fit into the slots horizontally.
* Added two-compartment drawer model.
* Added drawer with a tighter horizontal fit.
* Added double-height drawer model.
* Added Minifinity drawer model.

* Organize your Gridfinity Drawers with Minifinity!
https://social.thangs.com/m/195636

Gridfinity concept by Zack Freedman

Machenna56k