Pokéball with a working hinge STL-files for 3D-printing Regular Pokéballs can be downloaded at: https://thangs.com/designer/Mattias%20Hellberg/3d-model/Pok%C3%A9mon%20Balls-12533?manualModelView=tr

STL-files for 3D-printing Among Us model with a working hinge If you want the full model you can get it at: https://thangs.com/designer/Mattias%20Hellberg/3d-model/Among%20Us-12446?manualModelView=t

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3031582. Hingeless version is now as good as I can get it. It seems to print a little differently every time, so I can't

For more 2020 hinges as well as other assorted designs A pivot/hinge for

You'll need two 5x1mm and 6 6x2mm magnets for snapping. this tile was inspired by the Gravitrax Turntable.

**Valentines Day Heart Shaped Gift Box/Jewelry Box This box features print-in-place hinges and requires zero supports. I have included the STLs for two versions; a smaller one and a larger one.

Designed a new hinge for my Audi A4 B5 as the original broke.

working hinge design consisting of three bodies

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5593323. This is a box that I made for one of my high school level classes and was very proud of, so I thought I would po

you can modify this hinge however you want.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5395482. Replacement part for the hinge between cover and pullbar. This is for the DWST83347-1 This is a weak construct

a hinge

This is a must-have for every printer owner Bambu LAB P1P and other Bambu LAB models. Foldable filament spool holder with spring hinge consisting of three parts .Download, you will not regret it !!!

This is a remix of: https://www.printables.com/model/280596-flipper-zero-hard-case-magnetic/comments The previous case required supports to print properly, had very sharp edges and would allow the bu

For more 2020 hinges as well as other assorted designs A pivot/hinge for

More designs for building with 2020 extrusion A pivot/hinge for 2020 al

This is a just-for-fun mini turntable or coffee mug lazy Susan. Pretty straightforward, similar to my other lazy Susan designs using conical bearings. Please see the notes and details at... https

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2854348. This is the hinge part to a glass door on an entertainment center. It's designed for 3mm glass the pin is 5mm in

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5381458. This is a hinge replacement for the IKEA Stall shoe closet

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4389740. This hinge uses an M4 screw (30mm or longer) as the hinge pin, and has 4 countersunk mounting holes which also s

This is a 3D model of a hinge, precisely designed to meet your mechanical needs. This hinge model showcases a real-to-life mechanism used for connecting two solid objects, allowing a limited angle of

Someone asked me for this size and I thought it would be a very interesting exercise to try to make a 380mm circumference that can be printed on a 220mm bed. And, it came out great! Pretty straightf

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:1591510. I redesigned this for my Router bit Milescraft 2216. I started with the Hinge Mortise Router Guide by GA_3D and

LIMITED RELEASE for #JuneTunes contest. Mini Turntable. Print with standard supports at 0.2 layer height with 0.04 nozzle. Can print with filament swaps for more realistic details. (Instructions com

Remix of Simple Heart Box with Lid by 3dprintbunny

simple handle with a hinge. Print the whole thing then remove the brim and bend the handle a few times to loosen the hinge. It prints already assembled and is suprisingly smooth and sturdy. The rotati

MESA GIRATORIA COM MOTOR DE MICROONDAS - TURNTABLE WITH MICROWAVE MOTOR

It is a hinge to make any articulated creature or item you want. (Check out my other models)

A simple design that utilizes a 1.75mm piece of filament as a hinge pin. The V2 model is a redesign with an open base and a fillable mounting hinge that can be mounted using adhesive or screws.

I used this to hold down a sterilite container on top of my FlashForge Finder to finish off an enclosure setup. The slot in there matches up with the model I'm using, but as long as there is a semi ro

My toilet seat cover hinge broke so I created this as replacement part. Short or Long version provided. Suggested to go 100% infill for strongest Model: KOHLER Stonewood Toilet Seat, Quiet-Close Elo

This display turntable is really easy and cheap to print and assemble. It's great for displaying 3D prints! For more details, visit my upload on [Printables](https://www.printables.com/model/414443-

Hello Tribe, have you ever wondered why my Instagram Streams are so go, this is the device I use to support my camera. Here is our Sunlu Affiliate link https://www.sunlu.com/?sca_ref=507104.Qc1O4Eu3

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4626335. If you find this thing useful, please consider sending a tip. Thanks! https://paypal.me/cdsmakestuff A simpl

i made this in onshape, can be found on there searching for "azureusflames" another pokeball only this one snaps close, hinge has a 3.3mm hole, it is about 56mm wide in diameter, looks really close to

Hello, this turntable is very simple and all you need is an old motor from a broken microwave and a switch. The design is fully parametrised. I have added a rail that can be filled with ,“metal ball”

3d printed product spinner. Watch the build video! (and subscribe!) https://youtu.be/jGGnGijQW0o BEST BUDGET 3D PRINTER! https://s.click.aliexpress.com/e/_DeQJElD

More details on the build here</a> A (relatively) simple general purpos

I designed this after the original right side hinge on mine finally split all the way through. If you need left hinge, mirror along the X-axis. I printed this is PETG with tree supports enabled. I ha

section of a box with a dovetail lid and a notched hinge

This is one of my first designs using Fusion 360. I wanted a hinge that was strong enough to hold a 54 cm door made up of 2020 aluminum extrusion and a Plexiglas pane. The hole for the 5 mm shaft is i

LIMITED RELEASE for #JuneTunes contest. Mini Turntable Record Holder, can hold up to 12 mini records https://than.gs/m/896354 . Use this for parties and the records double as coasters. Print w

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5949255. Part of the mechanism to block and allow air through the front side vents (driver and front passenger). This

A case for game cartridges of the Nindendo 3ds. Top and bottom can be printed in any desired material, but i would recommend printing it with transparent filament to make it easier to see wich game i

A cover for the LCD hinge on your PowerBook 1xx.

This Tentacle System base rotates on a 608 bearing. You can either add magnets inside to create stable points where rotation stops, or you can omit them and

The flap of your Denon AVR hangs wrong because the right hinge has thought "HAHA I'll break now"? You don't get a replacement hinge because it has been sold out for many years? Then you are lucky here

CMM-BL - Hinges - Aluminium - CMM.30-BL-SH-4 More part numbers and CAD formats on www.traceparts.com/goto?Product=10-15072013-087624

Uploaded by Thangs Sync

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4128810. my m30x broke so i designed this. edit 1/2/2021: added v22 with separate files for both sides