Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3418674.

Nice flowing vase. constructed of ellipses.

Ellipse Vase

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3328251.

12 GA snap cap for shot gun.

12GA Snap Cap

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2980770.

This is a paper towel holder that looks like a giant bolt! This works great for in the kitchen or even for out in the garage or shop. 

If you like this design or any of my designs please like my page https://www.facebook.com/draftingjake/

If you need one printed please check out http://draftingjake.com

Giant Bolt Paper Towel Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3353646.

The most frustrating thing about condiment bottles is that towards the end you cant get all the product out. The solution is to keep them stored upside down. The issue with that is they aren't very stable in that position. I've created the solution to that problem. With this Universal Condiment Holder you will be able to store your condiments upside down while being sturdy enough to not fall over. 

Universal Condiment Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3234681.

This is my take on a speed loader for the Ar-15 magazines. This is a simple to use design. Just insert the ammo with the primer end towards the wall. Once full just push the plunger down.

AR-15 Speed Loader

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2890846.

This is a Blue print holder I created. It's designed to hold 11x17 prints (Half Size of 22x34) Diameter is 3"
Othersizes:
18x24


Blueprint Carrier

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2854504.

WWE Logo Coaster. Perfect for all your WWE PPV parties. The coaster with dots will work fine how it is. The one without dots would need to be filled with epoxy to work well.

WWE Logo Coaster

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3128092.

I've created a clock out of a motorcycle rim and a digital clock off of amazon. All parts are 3D printed to hold the clock to the rim. There is no adhesives used in this project. The rim is off of a  Honda Grom Clone (Hellcat 125). The size is 2.75 x 12 Alloy rim. It's designed to be used with only the rim. 

My Website: draftingjake.com

Clock Used: https://www.amazon.com/gp/product/B075WSW23D/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1

If you happen to make one please share.

Motorcycle Wheel Clock

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3414851.

This pistol holder is designed to hold a variety of pistols. This will be perfect whether storing it in a safe or out in the open for quick access. For those that print with flexible filament there are STLs for the cushions. If you dont print flexible filaments just cut foam of your choosing to fit. 

Check out my Cults3D Profile https://cults3d.com/en/users/DraftingJake/creations

Pistol Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2794738.

This is a customized LED sign. Its designed to be used with a battery powered LED light strip. The STL includes the sign pictured. To customize you need to edit the Sketchup File. Make your text or design into a solid and subtract it from the body. Remember to support the "floating" pieces. If you design and  print one please upload as a remix and or I Made one. Thanks!

Customizable LED Sign

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2846073.

This is an inspirational sign I made to hang at work.

Rick Sanchez Sign

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3612040.

Nice little bottle jack to help with your various projects.

Bottle Jack

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2886945.

I created this to carry my muffin in my backpack without getting squished. The inner dimensions are 83mm Diameter and 95mm tall. If you need bigger just scale it up. Should work on cupcakes too.

Muffin Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2750899.

Wasn't really fond of any spool holders out there. Either too many printed parts with long print times or required more hardware from the hardware store. This design uses the stock threaded rod and nuts that comes with the Anet A8.

Anet A8 Spool Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2853770.

This is a paint mixer that is designed to go into a drill. Depending on how you print this it should be fine for medium duty use. I wouldn't expect it to hold up very well in very thick material.The big is 4" in diameter and the small is 2" in diameter.

Paint Mixer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3444264.

Nice containers to store 5 lb bags of flour or sugar.

5 LB Sugar/ Flour Container

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2853400.

I needed a 1/8" Notch Trowel for an epoxy project. So I designed this real quick. If printed right this is strong enough to do a tile job. 

1/8" Notch Trowel

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2879626.

It might be after a long day of work, or maybe a romantic night, possibly you just want to get a head start in the morning. No matter what the reason is this Drink Shower Caddy is the perfect solution for you. It will hold your drink for you while you take a shower. Its designed to fit over a 55mm or 2" rail.

Drink Shower Caddy

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3474669.

Print these brackets and screws to mount a paper towel roll under your cabinet. You can use mounting tape or screw directly through the flange. 

Update: There is now a bracket with screw holes modeled.

Under Cabinet Paper Towel Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2638663.

This is a Christmas light hanger for my awning. I included a PDF of the dimensions.

Update: All the clips made it through the winter without breaking. We had single digit temps for weeks. The clips also worked on a regular gutter despite not being specifically designed for it.

Christmas Light Clip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2513407.

This tissue jar is able to take a toilet paper and dispense it as tissues. This will save you lots of money. It's designed to fit some of the biggest toilet paper rolls, so it shouldn't matter what brand/ size you use. The lid is held on with a rubber band. You can print this without any support. That being said I printed the lid top up and used support to get the desired print finish on top. I had to use supports in this case. It's better to take the tube out and use the toilet paper from the middle.

Tissue Holder 1.0

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2868874.

This is a long version of my Stackable Painting Pyramid ( https://www.thingiverse.com/thing:2781260 ) This is great for painting boards or trim. The top is 100mm wide. It has notches on top to allow extra paint to flow away better. These are stackable with my original ones. This also makes a good bridging test.

Stackable Painting Prism

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2763184.

This is a 3"x3" angle bracket. This makes your wood projects more rigid. It can accept up to 8- #6 drywall screws. 4 screws is the minimum. This has its own angle braces to add  even more strength to the brace. 

Angle Brace

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3259612.

This is a drawer hook designed to sit in the lip of my work drawer. There is a PDF with the dimensions so you can tell if it'll work for you or not. (Open PDF if it doesn't display right in preview)

Drawer Hook 16mm is designed to fit over a16mm (5/8) lip. The entire body is 4mm wide.

Drawer Hook

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2516952.

(On version 1 people had issues with a rubber band being used to hold on the lid. So I went in and changed it so the lid turns and locks in place.)

This tissue jar is able to take a toilet paper and dispense it as tissues. This will save you lots of money. It's designed to fit some of the biggest toilet paper rolls, so it shouldn't matter what brand/ size you use. The lid is held on with a rubber band. You can print this without any support. That being said I printed the lid top up and used support to get the desired print finish on top. I had to use supports in this case. It's better to take the tube out and use the toilet paper from the middle.

Tissue Holder 2

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2771613.

This is my take on a double cubicle hook for a backpack and coat. 

Cubicle Hook

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2879431.

This is a beefy cubical hook. Its designed to hold a backpack/ purse and coat. I tested it up to 60lbs and could of held more. This was designed for strength. 

Beefy Cubical Hook

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3290996.

This is a display hook I designed and printed for my gun. It will work with a lot of things you would want to display. The hook has 60mm of openness. The front of the hook is 40mm tall. One is designed to be used with an adhesive strip like the command hooks. The Other is used to be used with a drywall screw.

Wall Hanger/ Display

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3322203.

This is a wall mount for the Amazon Blink Hub. It uses the prong of the wall charger to be mounted on the wall. This will keep your hub out of the way looking neat. The usb ports are kept open.

Blink Hub Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2877688.

This is a 3D printed side table. The top is an epoxy top. Any wood top will work and is held with #8 screws. To make the table wider or taller just print more parts as needed. On my printer the parts did not need glue to hold together. In total there was over 165 hours of printing and about 2kg of filament used. Base measures 19.5" x 19.5" x 21.5" You will need the following parts:
4x Side - Mid
8x Side - End
4x Leg - Foot
4x Leg - Middle
4x Leg - Top

3D Printed Side Table (Lack Table)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2795851.

This is a can holder designed to sit under the couch cushion. This is great if you don't have a good place nearby to set a can down. You can print extensions if the original isn't long enough. Tolerances are tight so once you put the extension on it probably wont come off. 

Couch Can Holder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3334912.

Created a "Add An Inch" tool for a tape measure. It allows for easier measurements for inside corners. All you do is add an inch to where the line lands on the tape measure. The overall length is 2". This won't be for everyone but some should find it useful.

Add An Inch Tool

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3140341.

I didnt see a funnel that was long and skinny so I designed one real quick. Why pay $1.00 for something that I can make for $0.15?

If you want to see more functional prints please check out my facebook group: https://www.facebook.com/groups/2707808076112047/

For printing and design services please check out my website: https://draftingjake.com

Automotive Funnel

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2854348.

This is the hinge part to a glass door on an entertainment center. It's designed for 3mm glass the pin is 5mm in diameter and 5.5mm long. 

Glass Door Hinge

5 gallon buckets are very handy. They are great for mixing things in them. The only issue is that most of the time you got a square tool to scrape out the bucket. No more will this be an issue with this bucket scraper.

Bucket Scraper

This is a plate stand that allows you to display your plates or to save room when needed.

Plate Stand

This is a painting pyramid to keep your painted items off your work surface. They are also stackable and a good way to use up filament.

Stackable Painting Pyramid

This box is designesd to hold rivnuts in the case of the tacklife rivnut tool HHNP2A. 

Rivnut Box

I like to create designs that have practicality. But sometimes I come up with a just for fun b print.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow