Gabriel G
Gabriel G

Pokeball with hinge and snap

by
xazurewindx
xazurewindx
Follow
xazurewindx
xazurewindx
|
Image 1 of 4
Pokeball with hinge and snap 3d model
xazurewindx
xazurewindx
|
Image 1 of 4
Pokeball with hinge and snap 3d model
2D
3D
Makes
Pokeball with hinge and snap 3d model
Pokeball with hinge and snap 3d model
Pokeball with hinge and snap 3d model
Pokeball with hinge and snap 3d model

Pokeball with hinge and snap

i made this in onshape, can be found on there searching for "azureusflames" another pokeball only this one snaps close, hinge has a 3.3mm hole, it is about 56mm wide in diameter, looks really close to the real thing, the model comes with different parts so it requires assembly and additional things not included ( glue of choice, i used Loctite superglue, and a pin for the hinge, i used "uxcell 50Pcs 3mm x 18mm Dowel Pin 304 Stainless Steel Shelf Pegs Support Shelves Silver Tone" from amazon) *"reusable" = reusable with my other models so don't need to redownload if you already have

i have other balls in the making, that reuse all the model files except the top half files required to make the ball

  1. pokeball top
  2. bottom half (reusable)
  3. top ring (reusable)
  4. bottom ring (reusable)
  5. button (reusable)

11 Likes23 DownloadsJanuary 9, 2024