Heat Out / Cool In These seals were designed to try and increase my Bambu X1 Carbon's chamber temperature while keeping the electronics cooler. They use 3M VHB tape to mount (anywhere on the Rend

This is the piece that all the electronics will be mounted to. It has a hole in the middle that will slide over the copper pipe of the staff and it can be secured by two set screws. Orientation: pri

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4722011. About the relocation; I got the idea from https://www.thingiverse.com/thing:3830464. Moving the electronics o

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4660733. Jaycar has some amazing DIY learning kits, designed to help you in your journey of learning electronics - and th

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4354523. Updates 7/25/2020: Added version for 25A Aliexpress MOSFET by reques

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4354523. Updates 7/25/2020: Added version for 25A Aliexpress MOSFET by reques

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5232610. This enclosure is designed to hold all the electronics for the printer. It holds the MeanWell power supply, cont

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4849322. Update - Added additional Model I added an second model with fan grills, i recommend using this newer model

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4774618. Important note: This design is intended to be used with the electronics box relocated to the back of the print

These are legs I made for my Creality CR-10s electronics box. I made this because the electronics box fan was mounted on the bottom of the box and air couldn't quite flow correctly. Make sure to follo

I've modified my Sculpfun S6 Pro and I wanted a better electronics enclosure. This enclosure uses a front plate to better access the board. The case accommodates the MKS V1.0 board that came standard

I loved building the Chromance, but wanted to hide my electronics and terrible wiring so that it wasn't hanging out of the bottom. It's essentially 7 of the original "Center_Node" parts arranged into

Product contains: Electronic Puzzle - The Shadow 3D printable STL file supportless components Assembly manual Electronic part list Arduino code

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4579806. Remix of Electron MGC Case to create a case for the Acorn Electron GoSDC Cartridge. Original MGC Case: Dav

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4188243. Tostadas for your electronic projects! These are project boards targeted at educators and STEM/STEAM teachers

I've been upgrading our home network, which included swapping the current UniFi Lite 8 switches on each floor for the Flex 2.5G 8 PoE. The old cage I designed around the Lite 8 was too small for the n

Thangs didn't let me upload images but you can see some here: https://ibb.co/zP38gpd This case will fit an skr mini E3, tft35 E3, and a raspberry pi 4b I would recommend replacing the stock board fa

_Thank you for

This is a remix of External Electronics Box for Ender-3 Pro by sgsunder (https://www.printables.com/model/226631-external-electronics-box-for-ender-3-pro) The Original files were made for Meanwe

Modern electronic cigarette

Box for electronic projects, with pre-cut holes and lid with locks. No need to use screws or drill.

A quick and dirty Multiboard holder for a Jakemy JM-YD2PLUS electronic screwdriver.

Box for electronic projects in general. https://www.buymeacoffee.com/pyukiopyl

The 3D print is a base for the Arduino module and Breadboard to support the PDF (attachment) version of my book "Arduino: A Beginner’s Guide to Programming Electronics" included with the download.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5035574. Snug Lid Fit Electronics Box Prints in two parts, the main box and a snug fitting lid that mostly self-seals.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4748053. +++This is WiP and not entirely perfect!+++ Also keep in mind that you need a printer with a huge printsurface

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4761348. update I created a version of this lid that is 100% exact size for the Ender 5 electronics case and gives 10

Xoar, the Electronic Eagle, soars through the skies like a living sentinel of the digital age. Its vast wings, a lattice of gleaming alloys and shimmering circuits, hum faintly as they slice through t

#TidyDesk Electronic component organizer drawer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4818895. THIS IS NOT A FINISHED PART These files are for creating your own fan holes. Using your ender 5 without

An electronic tray for the Gouprc brushless system. A flat surface to be used with double sided tape to mount the receiver/esc plus a vertical battery tray that fits between the ecs and motor. It uses

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2972029. Replacement stand for Andoer DPF-803 10 inch digital photo frame. Will possibly fit other digital photo frames.

I love the back electronics case that Teaching Tech came up with. I also LOVE cooling lol..... So I made of version of this at 1st to work with a 5015, but its LOUD ! So I am remaking it with the s

This is the lid for the main electronics enclosure Orientation: print the large hexagon opening on the bed Supports: Probably need them but might be able to get away without? Layer Height: Ideally sho

A d6 inspired by the electron shells of atoms.

Electronic screw driver holder on slotted angle industrial rack

A d20 inspired by the electron shells of atoms.

A d12 inspired by the electron shells of atoms.

Enter the future with this Electronic Insect ! An exceptional blend of technology and natural design, this little gadget is a must-have for technology enthusiasts and lovers of the extraordinary. I

The main enclosure for the electronics for a fantastical LED staff I made for Burning Man in 2018 Orientation: put the the wider end of the hexagon on the print bed. Supports: Will require supports g

This is the lid V2 for the main electronics enclosure Orientation: print the large hexagon opening facing down toward the bed Supports: will need these especially due to the little "feet" poking out f

The Slide out door for the Main Electronics enclosure Orientation: print the flat side on the printer bed Supports: Supports required for tabs and pin at bottom Layer Height: Ideally should be printed

A d10 inspired by the electron shells of atoms.

A d4 inspired by the electron shells of atoms.

A d10 decader (d00) inspired by the electron shells of atoms.

A d8 inspired by the electron shells of atoms.

This is a seven-die RPG dice set based on the electron orbits of atoms. It includes a d4, d6, d8, d10, d10 decader (d00), d12, and d20.

The perfect gift for the electronics pro or hobbyist in your life. Capacitors and resistor hold cards, clips, pens, etc. Prepainted Bambu Studio Project files included. Print details coming soon.

This versatile 3D-printed electronics cleaning tool is designed for maintaining your devices with ease. The multi-functional design includes: • Hooked End – Perfect for removing debris from charging p

This is KP3S splitted electronics cover with customizable fan and feets mounts. It allows you to access main board with unscrew only 4 screws, use fans up to 80mm squared (by customizing fan mount in